[LAU] oh yoshimi, one more time

[david]

cal wrote:
> david wrote:
>> cal wrote:
>>> david wrote:
>>>> [ ... ]
>>>>>> @audio          hard    rtprio          50
>>>>>> @audio          soft    rtprio          30
>>>>> These are rather low. I just looked, and yoshi tries for 55, so these settings
>>>>> would fail. You could either bump those settings higher, or adjust the value
>>>>> in MusicIO.cpp line 214 down to your level and see if that helps.
>>>> I'll boost mine up to go with toshi. It was a copy/paste from someone 
>>>> else's recommendation.
>>> I still get the feeling you're inclined to set them lower than what's
>>> consider normal or recommended. The Jack FAQ spells it out pretty
>>> simply - <http://www.jackaudio.org/faq>.
>> Thanks. I changed the hard one to 99. The JACK FAQ didn't say anything 
>> about the difference between "hard" and "soft", so I set the "soft" one 
>> to 55. Can't test it right now, will test it later!
>>
> Almost, but not quite. Somewhere in limits.conf it describes (perhaps cryptically)
> how you can set hard and soft at the same time (on the same line) using the '-'.
> I don't know of any reason to have hard and soft set different, so as per the jack
> faq is about as good as you can get.

With hard and soft both set to 99, yoshimi 0.053 is busy making happy 
noises for me!

Interesting difference between Zyn and Yoshimi here. Zyn has a Reverb 
effect set, and shows it. Yoshimi shows "No effect". I don't think I 
picked any effect in Zyn, I think that's just the way it came.

No prb, glad to have an updated Yoshimi running around!  Cal = 
Excellent! :-)

-- 
David
gnome at hawaii.rr.com
authenticity, honesty, community