[LAU] What professional PCIe audio cards do work with Linux?

[Jason Jones]

I've used a RME Raydat, which is PCI-E.  It works on all 16 channels at
96KHZ, and all 32 at 44.1 or 48.  Latency is near zero, and the optional
word clock module even functions properly.

--Jason
www.advancedbudgetstudios.com


On Mon, Nov 12, 2012 at 12:41 AM, Ralf Mardorf
<ralf.mardorf at alice-dsl.net>wrote:

> @ Rivera: I don't trust lists anymore ;).
> @ Mike:   I already tested several Linux, but I'll test some live CDs
>           too.
>
> On Mon, 2012-11-12 at 01:47 -0500, Tim E. Real wrote:
> > On November 11, 2012 01:42:58 PM christian bunge wrote:
> > > I work with sta DSP2000 C-Port from Hoontech.
> >
> > Pardon me, we're discussing this product in another thread.
> >
> > The converters are in a separate rack, right?
> >
> > Can you tell me if ALSA gives you the ADC/DAC controls
> >  for the converters?
> > ie running amixer shows some ADC/DAC controls?
> >
> > What mixer are you using?
> > A user has the AKxxx drivers loaded but Envy24control and Mudita24
> >  aren't showing the ADC/DAC controls because ALSA doesn't seem
> >  to be providing them for him.
>
> Hi Tim :)
>
> the RME card has it's own mixer GUI hdspmixer. All ADAT channels are
> present there. If I connect a mic to ADAT 9, hdspmixer does show the
> audio signal.
> Analog 1 and 2 are capture and playback 1 and 2, ADAT 1 and 2 are
> capture and playback 7 and 8. Capture and playback 9 to 14 should be
> ADAT 2 to 8, but those ports are dead.
>
> The input of ADAT 1 can be heard at output ADAT 1 the input of ADAT 8
> can be heard at the output of ADAT 1 and ADAT 8, but ADAT 8 isn't routed
> to a capture port.
>
> What ever box I check or uncheck, what ever fader I use, it doesn't
> change.
>
> FWIW it's known that hdspconf can't be opened when using my card, but I
> can use alsamixer instead. alsactl can not store. alsamixer doesn't
> provide all mixer abilities hdspmixer does provide.
>
> Regards,
> Ralf
>
> _______________________________________________
> Linux-audio-user mailing list
> Linux-audio-user at lists.linuxaudio.org
> http://lists.linuxaudio.org/listinfo/linux-audio-user
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.linuxaudio.org/pipermail/linux-audio-user/attachments/20121112/f1fab9b6/attachment.html>