[LAU] A new approach
gianfranco at moddevices.com
Fri Apr 1 13:08:27 UTC 2016
> On 01.04.2016 01:22, Will Godfrey wrote:
>> As part of our quest for the best possible sound we are planning an enhancement
>> that passes bits through a grading process (the well known 'Enharmonic Bit
>> Comparator' - version 33)* thus ensuring that any bit asymmetry is removed.
>> In laymans terms, this has a heater to agitate the bits, then an amplifier to
>> highlight the errors, and rectifiers to remove them. Symmetrical bits produce
>> significantly less quantum noise so reduce the possibility of alignment
>> boundary collisions, giving a much warmer, smoother presentation.
>> Such advanced technology has a cost of course, so to gain the greatest benefit
>> from this process it is necessary for Yoshimi to now use only audiophile grade
>> bits, rather than the standard ones and zeros present in ordinary programs. Bit
>> quality is heavily dependent on the source so we recently did a line-by-line
>> review of the code, feeding it to our Delta Orthogonal Grader.
>> Finally, there is the open-source BitShine engine (BS). This 'clarifies'
>> individual zeroes and ones passing through it, making them sharper, so should
>> give greater precision when passed on to the DA converter. This is available
>> under the 'Multi User Grant' license. As it appears to be GPL compatible we are
>> looking at it for possible inclusion.
>> I should point out that there is only a narrow window for discussion as we
>> expect to be committed by lunch time today.
In our devices we’re using a different process but with the exact same objective.
Still in the analog phase we have straight conductor tracks that are long enough to align the flow of electrons. These aligned electrons, when going into the AD, yield the biggest amount of symmetric bits.
Coriolis effect and gravitational influences must be taken into account so we instruct the users to correctly position the MOD devices, always aligning the inputs and outputs with the Earth’s North/South axis.
Those positioned in the south hemisphere should not forget to invert this alignment in order to avoid the formation of undecided bits.
+49 160 646 9313
gianfranco at moddevices.com
>> * EBC33 - Mullard
> I'm very sceptical to say the least! So far none of these modern
> computation methods could convince me. Furthermore, it is common
> knowledge that tube-calculated bits are indeed the better sounding bits.
> That's why I will always keep running jackd on my compact mainframe.
> Exactly how my ancestors did!
> Here's someones father adjusting the jack-patchbay via MotifJackCtl
> Thanks for starting this
> Linux-audio-user mailing list
> Linux-audio-user at lists.linuxaudio.org
-------------- next part --------------
An HTML attachment was scrubbed...
More information about the Linux-audio-user