[LAU] jconvolver does not find a running Jack2 server

[Olivier Humbert]

Le 2019-08-06 19:10, Moshe Werner a écrit :
> Hey Chris,
> 
> thanks for chiming in.
> 
>> I would suggest starting jackd from the command line, and posting
>> the
>> entire set of messages starting with the command line you typed to
>> the end
>> of the startup messages.
>> 
>> Perhaps there is a permission problem with your user account which
>> is not
>> allowing shared memory setup.
> 
>  [moshew at moshe-laptop ~]$ jackd --realtime --realtime-priority 89
> -dalsa -dhw:D1248 -r48000 --period 128 -n2

--period 128 -> this is very low. Not all system/hardware are able to 
handle it.

Suggestion is to try with a higher value such as 1024 for a starting.
Then, if it works, go down to 512, then 256.

Hope that helps,
Olivier

-- 
Site web : https://librazik.tuxfamily.org/
Donation : https://liberapay.com/LibraZiK/
Diaspora : 
https://framasphere.org/people/8c184af0c9450134f6682a0000053625
Mastodon : https://mastodon.xyz/@LibraZiK