[linux-audio-user] m-audio quattro and alsa mixer

[iriXx]

hi

im using 0.9rc3 - should i upgrade to cvs?
all that qinit says is "Segmentation fault" - can check dmesg / 
/var/log/messages etc. tho if you need...
thanks, yes its a useful script... ahh, i see, if it has no mixer elems 
that would explain the message from alsamixer, i was worried i'd done 
something wrong in the config. volume adjusts fine with alsaplayer but 
xmms plays *very* loud... like i have it on about 1% and its already 
booming... i do use an analog mixer at home but when im out n about with 
the laptop i tend to just use cans (except for performance of course)...

thanx
m

> Are you using cvs or 0.9rc3? Can you send the output of qinit? BTW I 
> didn't write it. Takashi whipped it up for me while we were testing and 
> it has become part of my startup scripts so I thought it would be useful 
> for other users too.
> 
> Apart from that the quattro has no mixer elems. The only way you can 
> adjust the volume is using the output level buttons on the box or using 
> software mixing like in ardour, alsaplayer, xmms (equilisation). You 
> should be using an analog mixer with it if you want to record at 
> sufficient volumes.
> 
> 


-- 
iriXx
www.iriXx.org

copyleft: creativity, technology and freedom?
info at copyleftmedia.org.uk
www.copyleftmedia.org.uk

  _
( )  ascii ribbon against html email
  X
/ \    cat /dev/sda1 > /dev/dsp


   *** stopping make sense ***