[linux-audio-user] HDSP Firmware?

[Gustavo Zamorano S.]

If you are getting revision 32, I think it should be in hex.
Becase 32 in hex is 50 in dec.
(3 x 16) + 2 = 50
GZS


BrbrOfSvl at aol.com wrote:
> Hi,
> 
> I just put together a linux box and I'm going to be using the RME Hammerfall DSP w/ the Multiface.  When I do lspci I get:
> 
> 01:09.0 Multimedia audio controller: Xilinx Corporation RME Hammerfall DSP (rev 32)
> 
> I'm kinda confused because I thought the rev should have been either 0a or 0b (or maybe 10 or 11).  On my windows side I ran the firmware updater from the RME website, and I get "hardware revision 50" with a tag that says I don't need to update.  Is this normal?  I don't know if this makes a difference, but I'm currently running RedHat 9 with the kernel from Planet CCRMA (the .caps one rather than the .acpi, which won't work on my hardware for whatever reason).
> Slowly but surely I'm gonna get this thing running on Linux.  Any other hints anybody's dying to share?  I'm sure I've missed a ton of conversation about the HDSP in the past... I'll be going through those later.  =o)
> 
> Thanks,
> 
> Matt Barber
> 


-- 
This Message is sent from my Red Hat 8.0 Linux server
      Machine Registration number 205692 at http://counter.li.org/

       .-.                    Gustavo Zamorano S.
     .-. |                    Registered Linux user number 320898
   .-. | |                                      at http://counter.li.org/