[LAU] OT: hardware problem Behringer FCB1010 and edirol USB midi adaptors.

[Bill Allen]

Yes, it happens just plugging the midi in of the FCB1010 to the midi out of
any of the edirol usb devices - the FCB1010 signals its disapproval by
lighting up a period next to the currently selected bank. If I try turning
it off and on, it starts blinking and won't do anything else.


On Tue, Jan 29, 2013 at 3:31 AM, Clemens Ladisch <clemens at ladisch.de> wrote:

> Bill Allen wrote:
> > when I hooked the FCB1010 midi in to the UM-2 midi out, the FCB1010
> > goes into error mode. This happens with every one of the edirol
> > devices.
>
> Does this happen *before* you try to actually use the FCB1010?
>
> What differentiates Roland devices from most other MIDI interfaces is
> that they send Active Sense messages.  The FCB1010 manual says this is
> supported, and in any case these should be ignored if unsupported, but
> one can never know how buggy the firmware is.
>
>
> Regards,
> Clemens
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.linuxaudio.org/pipermail/linux-audio-user/attachments/20130129/d84aafd8/attachment.html>