7 Dec
2018
7 Dec
'18
9:30 p.m.
Please reply to the mailing list and don't top-post.
That is probably a misunderstanding. The Presonus and the Focusrite 2nd
gen USB devices don't provide access to the device's internal routing
when using it with a Linux machine. They are class compliant and don't
need individual drivers. Sound devices that aren't class compliant need
an individual driver and there might be access to the device's internal
routing, as there is for some RME audio devices, when using the Linux's
hdspmixer wich is similar to RME's totalmix,
http://www.rme-audio.de/en/support/techinfo/hdsp_totalmix_software.php.
Monitoring without latency means, that you could route the input
channels, directly to the output channels. IOW if you connect a
microphone, you could listen to the unprocessed signal without latency,
it's not the signal processed by your Linux machine.
Thank you for the explanation.
That answers most of my questions very nicely, even ones I havent asked
yet.
reply do not list the usergroup address but the poster so this will
happen every now and then.
It involves reply all then remove the to: address and cut and paste the
cc (which is the group address) into to: it is the way the group
software adds addresses.
the group address should ideally be in the reply-to and not a cc, but I
will do the abovementioned workaround.