Re: [Jack-Devel] Jack on Raspberry PI 2 (Ron)

Hi, (I hope I am using email correctly. This is the first time I have used an email list such as this) First, let me say thanks to everyone that responded. The web page link really helped. I have not investigated installing the Raspberry repo of jack as of yet. I will look into that a bit later. For now I will stick with using the source I have from the jack website. OK, success (sort of). I changed the shared memory size (/dev/shm) to 128M. Now the jackd server starts and stay running. However when using qjackctl I still receive the cannot lock memory message however as I said the server actually stays running. Jackd message output: 07:36:18.155 Patchbay deactivated. 07:36:18.177 Statistics reset. 07:36:18.206 ALSA connection change. Cannot connect to server socket err = No such file or directory Cannot connect to server request channel jack server is not running or cannot be started 07:36:18.235 ALSA connection graph change. 07:36:20.455 JACK is starting... 07:36:20.458 /usr/local/bin/jackd -r -dalsa -dhw:0 -r48000 -p1024 -n2 Cannot connect to server socket err = No such file or directory Cannot connect to server request channel jack server is not running or cannot be started 07:36:20.530 JACK was started with PID=2680. jackdmp 1.9.11 Copyright 2001-2005 Paul Davis and others. Copyright 2004-2014 Grame. jackdmp comes with ABSOLUTELY NO WARRANTY This is free software, and you are welcome to redistribute it under certain conditions; see the file COPYING for details JACK server starting in non-realtime mode Cannot lock down 82278944 byte memory area (Cannot allocate memory) creating alsa driver ... hw:0|hw:0|1024|2|48000|0|0|nomon|swmeter|-|32bit control device hw:0 ALSA: Cannot open PCM device alsa_pcm for capture. Falling back to playback-only mode configuring for 48000Hz, period = 1024 frames (21.3 ms), buffer = 2 periods ALSA: final selected sample format for playback: 16bit little-endian ALSA: use 2 periods for playback 07:36:22.657 JACK connection change. 07:36:22.667 Server configuration saved to "/home/ron/.jackdrc". 07:36:22.670 Statistics reset. 07:36:22.688 Client activated. 07:36:22.701 JACK connection graph change. Cannot lock down 82278944 byte memory area (Cannot allocate memory) BUT if I start jackd via a terminal session (cygwin terminal) and enter: /usr/local/bin/jackd -r -dalsa -dhw:0 -r48000 -p1024 -n2 jackd responses with: ron@squireoaksfarm-radio ~/Desktop $ /usr/local/bin/jackd -r -dalsa -dhw:0 -r48000 -p1024 -n2 jackdmp 1.9.11 Copyright 2001-2005 Paul Davis and others. Copyright 2004-2014 Grame. jackdmp comes with ABSOLUTELY NO WARRANTY This is free software, and you are welcome to redistribute it under certain conditions; see the file COPYING for details JACK server starting in non-realtime mode creating alsa driver ... hw:0|hw:0|1024|2|48000|0|0|nomon|swmeter|-|32bit control device hw:0 ALSA: Cannot open PCM device alsa_pcm for capture. Falling back to playback-only mode configuring for 48000Hz, period = 1024 frames (21.3 ms), buffer = 2 periods ALSA: final selected sample format for playback: 16bit little-endian ALSA: use 2 periods for playback As you can see the jackd server does NOT report can not lock memory. Why is this? Also ASLA is reporting it can not open the device for capture. Why is this? Sorry, but I'm really new to sound and sound device management on Linux. My ultimate goal is to get an application running that requires jack and this is my first stumbling block on on that path. 73 Ron / W4MMP On 4/17/2015 06:00, jack-devel-request(a)lists.jackaudio.org wrote: