29 Sep
2018
29 Sep
'18
4:06 a.m.
Holger Marzen <holger(a)marzen.de> writes:
On Mon, 24 Sep 2018, David Kastrup wrote:
While it does not apply to either the Scarlett 2i2 or Scarlett 2i4,
quite a few audio cards that cannot be synchronized with a wordclock
cable can be brought to the same clock via an S/PDIF connection.
Just putting this in here in case someone with different hardware has a
similar problem.
--
David Kastrup
Holger Marzen <holger(a)marzen.de> writes:
That was my first approach but I couldn't find an affordable stereo EQ.
Most affordable devices are 2x15 or 2x31 and not 15 or 31 band stereo.
I don't want to set the channels seperately.
> > Now I have 2 audio interfaces that can't be synchronized with a
> > wordclock cable. Then I wanted 2 additional outputs to feed my
active speakers (Neumann
KH120A plus KH805 sub). Because of my room's damping of the high
frequencies (at least compared to my headphones AKG K812) I need an EQ
before them. So I use a Scarlett 2i2 for this purpose, with CALF
Jackhost and a Calf EQ feeding this outputs.
This may sound defaitist but I'd lean towards just using an analog EQ
here.