[Jackaudio] Pulseaudio with Jack How-To [was no audio through headphone jack]

On Mon, 8 Jun 2020 at 20:19, Piscium <groknok(a)gmail.com> wrote: I setup my desktop PC following the Arch and Jack wikis ([1], [2], [3]) using Jack2 and Cadence. What I got worked except that it was flaky to the point of being unusable. I then spent a few more hours sorting out issues and now I have a solid solution. I will describe what I did as it may be useful to those that have use cases similar to mine. I had the hunch that the flakiness was caused by race conditions between Pulseaudio/Jack/Systemd. Cadence by default does not start Jack or Pulse, but I had configured it to start them so I went back to Cadence default. Pulse by default starts automatically. I checked /etc/pulse/client.conf and it had autospawn = no so I did not touch it. I then created ~/.pulse/client.conf and set autospawn = no. That however was not enough to stop Pulse from autostarting due to XDG Autostart [4] (Pulse installs /etc/xdg/autostart/pulseaudio.desktop). I am on XFCE so to fix this I used the XFCE Settings tool to disable autostart of Pulse. That sorted the problem of Pulse autostart (after a reboot) but there was still flakiness. Next I turned my attention to configuration files. Jack's seemed fine but I found something odd for Pulse: there was a ~/.pulse folder and also a ~/.config/pulse folder and they had different sets of files. I thought this could be causing problems due to race conditions. I deleted both folders and rebooted but that did not solve the problem. I then created a symlink from ~/.pulse to ~/.config/pulse but this caused Pulse not to start. Searching with Google I found posts from many years ago by people putting symlinks of ~/.pulse to NFS shares that had problems and someone said that Pulse did not allow that symlink for security reasons. I then symlinked the other way, made ~/.config/pulse a link to ~/.pulse. This worked. I was surprised. The Arch man page says [5] says that the configuration file is ~/.config/pulse/client.conf whereas another man page [6], which is presumably older, says it is ~/.pulse/client.conf. So why was Pulse not starting with a symlink in an old configuration style? It made little sense. Also if the symlink one way was indeed a security issue why wasn't it the other way? Security hole? Lastly I uninstalled the XFCE audio plugin, for two reasons, one to avoid flakiness in Pulse and the other because it became redundant as it can set the volume only of sound that goes through Pulse. Now it all works reliably. I lost something compared to my previous Pulseaudio-only configuration: the ability of changing the volume with the media keys on my keyboard or audio plugin. I now have to set the volume with each separate app. This is a minor inconvenience and I am fine with it as my current solution is solid (after 3 days) and I get better sound than before. [1] https://wiki.archlinux.org/index.php/JACK_Audio_Connection_Kit#PulseAudio [2] https://wiki.archlinux.org/index.php/PulseAudio/Examples#PulseAudio_through… [3] ttps://github.com/jackaudio/jackaudio.github.com/wiki/WalkThrough_User_Puls… [4] https://wiki.archlinux.org/index.php/XDG_Autostart [5] https://jlk.fjfi.cvut.cz/arch/manpages/man/extra/libpulse/pulse-client.conf… [6] https://linux.die.net/man/5/pulse-client.conf