On 07/09/2017 05:34 PM, sqweek wrote:
On 9 July 2017 at 22:21, alex <adrcki(a)gmail.com
<mailto:adrcki@gmail.com>> wrote:
Indeed that seems like a reason. I'm SSHing into to Odroid with -X
so I can launch Pd with its GUI, so I tried to SSH without -X and
jack wouldn't start, but then SSHing back with -X made jack start.
Can you post an example of how I should start jack with a startup
mechanism that's run by my graphical environment? I'm not really
following there...
Having the graphical environment start jackd assumes that there is a
graphical environment running on the Odroid, which I don't believe is
the case here? Using -X with ssh forwards X11 connection attempts on
the Odroid to the X server on your local machine, but since dbus afaik
isn't network transparent[1] the DISPLAY you end up with via ssh -X
will I think not be useful for the dbus side of jack. So you can
probably get away with setting DISPLAY to something arbitrary in your
init script, like:
DISPLAY=:0 jackd -dalsa ...
That did it, kind of... Jack is starting and Pd too,
but I get no sound.
The DSP does go on (there's an LED on the synth I've built that goes on
when Pd's DSP is on) but I can't hear anything.
Now though, I can SSH into the Odroid without -X and the script
launching jack and Pd works and sounds works fine.
This is jack's log:
jackdmp 1.9.10
Copyright 2001-2005 Paul Davis and others.
Copyright 2004-2013 Grame.
jackdmp comes with ABSOLUTELY NO WARRANTY
This is free software, and you are welcome to redistribute it
under certain conditions; see the file COPYING for details
JACK server starting in realtime mode with priority 10
audio_reservation_init
Acquire audio card Audio1
creating alsa driver ... hw:USB|hw:USB|512|2|48000|2|4|nomon|swmeter|-|32bit
configuring for 48000Hz, period = 512 frames (10.7 ms), buffer = 2 periods
ALSA: final selected sample format for capture: 32bit integer little-endian
ALSA: use 2 periods for capture
ALSA: final selected sample format for playback: 32bit integer little-endian
ALSA: use 2 periods for playback
JackEngine::XRun: client = pure_data_0 was not finished, state = Triggered
Jack main caught signal 15
JackAudioDriver::ProcessGraphAsyncMaster: Process error
JackEngine::XRun: client = pure_data_0 was not finished, state = Triggered
JackAudioDriver::ProcessGraphAsyncMaster: Process error
Released audio card Audio1
audio_reservation_finish
But this is the log when the script is run manually (and sound works
properly):
jackdmp 1.9.10
Copyright 2001-2005 Paul Davis and others.
Copyright 2004-2013 Grame.
jackdmp comes with ABSOLUTELY NO WARRANTY
This is free software, and you are welcome to redistribute it
under certain conditions; see the file COPYING for details
JACK server starting in realtime mode with priority 10
audio_reservation_init
Acquire audio card Audio1
creating alsa driver ... hw:USB|hw:USB|512|2|48000|2|4|nomon|swmeter|-|32bit
configuring for 48000Hz, period = 512 frames (10.7 ms), buffer = 2 periods
ALSA: final selected sample format for capture: 32bit integer little-endian
ALSA: use 2 periods for capture
ALSA: final selected sample format for playback: 32bit integer little-endian
ALSA: use 2 periods for playback
Jack main caught signal 15
JackEngine::XRun: client = pure_data_0 was not finished, state = Triggered
JackAudioDriver::ProcessGraphAsyncMaster: Process error
Released audio card Audio1
audio_reservation_finish
So, what could the issue be now?