1 Feb
2018
1 Feb
'18
7:16 a.m.
Hi all,
I'm putting together an inprocess client (as it was the lowest hanging fruit), but
I'd like to output log messages, I note that outputting to stdout/stderr doesn't
seem to work.
Is there any API into which I can hook my logging framework output ?
Regards
/Robert
1 Feb
1 Feb
7:44 a.m.
I'm putting together an inprocess client (as it
was the lowest hanging fruit),
but I'd like to output log messages, I note that outputting to stdout/stderr
doesn't seem to work.
Is there any API into which I can hook my logging framework output ?
Just for additional information, I have an .so called jackmyplug.so, in
/home/pi/jackmyplug.so (exporting jack_initialize/jack_finish), so I load it with:
pi@realtimepi:~ $ jack_load myplug /home/pi/jackmyplug.so
Jack: JackClient::SetupDriverSync driver sem in flush mode
Jack: JackLinuxFutex::Connect name = jack_sem.1000_default_jack_load
Jack: Clock source : system clock via clock_gettime
Jack: JackLibClient::Open name = jack_load refnum = 2
could not load /home/pi/jackmyplug.so, intclient = 0 status = 0x 1
Ideas ?
Regards
/R
7:49 a.m.
pi@realtimepi:~ $ jack_load myplug
/home/pi/jackmyplug.so
Jack: JackClient::SetupDriverSync driver sem in flush mode
Jack: JackLinuxFutex::Connect name = jack_sem.1000_default_jack_load
Jack: Clock source : system clock via clock_gettime
Jack: JackLibClient::Open name = jack_load refnum = 2
could not load /home/pi/jackmyplug.so, intclient = 0 status = 0x 1
Ok, ok, slowly getting there, I've now copied the jackmyplug to /usr/local/lib/jack
folder, and do:
pi@realtimepi:~ $ jack_load jackmyplug
Jack: JackClient::SetupDriverSync driver sem in flush mode
Jack: JackLinuxFutex::Connect name = jack_sem.1000_default_jack_load
Jack: Clock source : system clock via clock_gettime
Jack: JackLibClient::Open name = jack_load refnum = 2
Jack: JackClient::ClientNotify ref = 3 name = jackmyplug notify = 0
Jack: JackClient::AddClient name = jackmyplug, ref = 3
Jack: JackLinuxFutex::Connect name = jack_sem.1000_default_jackmyplug
Cannot read socket fd = 3 err = No such file or directory
Cannot read socket fd = 5 err = Success
CheckRes error
JackSocketClientChannel read fail
CheckRes error
Jack: JackClientSocket::Close
Could not read result type = 29
jackmyplug is running.
Jack: JackLibClient::ShutDown
Jack: JackClient::ShutDown
Jack: JackPosixThread::ThreadHandler : exit
Cannot write socket fd = 3 err = Broken pipe
CheckRes error
CheckRes error
Could not write request type = 27
Jack: jack_client_close
Jack: JackClient::Close ref = 2
Jack: JackClient::Deactivate
Jack: JackSocketClientChannel::Stop
Jack: JackPosixThread::Kill
Server is not running
Jack: JackClientSocket::Close
Jack: JackClientSocket::Close
Jack: JackLibClient::~JackLibClient
Jack: JackShmReadWritePtr1::~JackShmReadWritePtr1 2
Jack: Succeeded in unlocking 432 byte memory area
Jack: JackLibGlobals Destroy 17d1160
Jack: ~JackLibGlobals
Jack: no message buffer overruns
Jack: JackPosixThread::Stop
Jack: JackPosixThread::ThreadHandler : exit
Jack: JackShmReadWritePtr::~JackShmReadWritePtr 1
Jack: Succeeded in unlocking 1240 byte memory area
Jack: JackShmReadWritePtr::~JackShmReadWritePtr 0
Jack: Succeeded in unlocking 71390368 byte memory area
Jack: jack_client_close res = -1
Upon which the server stopped streaming. Does the above look ok ? None of my log outputs
can been seen...
Regards
/Robert
8:47 a.m.
On 01.02.2018 15:16, Robert Bielik wrote:
Hi all,
I'm putting together an inprocess client (as it was the lowest hanging fruit), but
I'd like to output log messages, I note that outputting to stdout/stderr doesn't
seem to work.
Is there any API into which I can hook my logging framework output ?
The internal client runs inside the JACK process, that's where it'll
log, too, I guess.
Try to start jackd in a terminal and I'd expect your client's logs to
show up there, not in the terminal where you jack_load'ed it in the
first place.
2677
days inactive
2677
days old
jackaudio@lists.linuxaudio.org
3 comments
2 participants
participants (2)
-
Hanspeter Portner -
Robert Bielik