Linux-audio-dev August 2005

linux-audio-dev@lists.linuxaudio.org

55 participants
47 discussions

[linux-audio-dev] [ANN] liboscqs 0.0.3 - An OSC Query System

by Martin Habets

liboscqs is a library to provide a Query System and Service Discovery for applications using the Open Sound Control (OSC) protocol [1]. The initial proposal for the OSC Query System was provided by Andrew W. Schmeder and Matthew Wright in July 2004 [2]. The next paragraph has their abstract: A Query System is proposed for inter-application control scenarios. The queries enable namespace exploration, documentation, type-signature, return-type-signature and parameter constraint specification, current-value polling, identification of common interpretation maps via osc-schema, and error reporting. See [2] for the full paper describing their proposal. This project is the result [3] of the various discussions that followed, but remains very close to the original proposal. Besides a Query System, this library provides Service Discovery. This allows applications to annouce their presence locally and on a whole computer network. For more information, source tarballs, RPM packages, and Debian packages please see the homepage at: http://liboscqs.sourceforge.net/ - Martin Factfile: - liboscqs uses liblo [4] as an OSC server. Thanks Steve! - The liboscqs source uses the scons [5] build tool - liboscqs supports Service Discovery using either Howl or Spread - liboscqs has only tested on Linux so far, but the intent is to support all POSIX systems. - liboscqs is FSH 2.3 compliant. References: [1] http://www.cnmat.berkeley.edu/OpenSoundControl/ [2] http://www.opensoundcontrol.org/papers/query_system/ [3] http://liboscqs.sourceforge.net/schema/OSCQS-schema-0.0.1.pdf [4] http://plugin.org.uk/liblo/ [5] http://www.scons.org/

18 years, 8 months

[linux-audio-dev] WAVE-EX File Format Spec

by Fred Gleason

Howdy Folks: Would anyone happen to have a link to and/or copy of the WAVE-EX file format spec handy? I've tried Googling, but closest I come is a (now broken) link to one of the M$ sites. Searching M$ directly didn't work either. Thanks! |-------------------------------------------------------------------------| | Frederick F. Gleason, Jr. | Director of Broadcast Software Development | | | Salem Radio Labs | |-------------------------------------------------------------------------| | Easiest Color to Solve on a Rubik's Cube: | | Black. Simply remove all the little colored stickers on the | | cube, and each of side of the cube will now be the original color of | | the plastic underneath -- black. According to the instructions, this | | means the puzzle is solved. | | -- Steve Rubenstein | |-------------------------------------------------------------------------|

18 years, 8 months

[linux-audio-dev] Libs for reading/writing midis

by Will Woodruff

It seems like every single linux midi app has it's own code for reading/writing midi files. What's up with that? Are there no quality libraries?

18 years, 8 months

[linux-audio-dev] [OT} : Anyone read Finnish?

by Erik de Castro Lopo

Hi all, I've got someone violating the license on Secret Rabbit Code. The offending binary-only download is listed here: http://pelit.koillismaa.fi/plugins/dsp.php but I'm having trouble getting a contact email address for pelit.koillismaa.fi and/or koillismaa.fi. I've attempted a whois which directs me to: https://domain.ficora.fi/ but I still can't find an email address. Any help that someone may be able to offer would be appreciated. Cheers, Erik -- +-----------------------------------------------------------+ Erik de Castro Lopo nospam(a)mega-nerd.com (Yes it's valid) +-----------------------------------------------------------+ The main confusion about C++ is that its practitioners think it is simultaneously a high and low level language when in reality it is good at neither.

18 years, 8 months

[linux-audio-dev] ALSA MIDI latency correction

by Peter Brinkmann

Hi, I've been contemplating the problem of reconciling different latencies of various sound sources, but so far the only solutions I have been able to think of seemed sort of awkward, and googling didn't help much, either. Specifically, here's the issue I'm looking at: I have a sequencer application that has several MIDI output ports, each connected to some device that accepts MIDI input. Those devices may have vastly different latencies (for instance, I may want to use my digital piano, without any noticeable latency, together with timidity, which has serious latency, even when started with options like -B2,8, never mind the latency introduced by my USB sound card), but of course I don't want to hear a time lag between those devices. I don't mind a little bit of overall latency; the piano may wait for timidity as long as they're in sync. I'm currently scheduling all my events through one queue (is that the recommended method? I've been wondering whether it would make more sense to have, say, one queue per output port, but I don't see how this would help), and the only solution I have been able to think of is to explicitly schedule events for faster devices at a later time. This is clumsy, and it's exacerbated by the fact that I'd like to schedule events in terms of ticks rather than milliseconds. Since latencies are usually measured in milliseconds, that means I have to convert them to ticks, considering the current tempo of the queue. There's gotta be a better way. Ideally, there are two things I'd like to do: 1. Assign a delay dt to each output port, so that an event scheduled at time t0 will be sent at time t0+dt. Like this, I could compute the maximum latency of all my devices, and the output port attached to a device would get a delay of (max latency - latency of device), so that everything would be in sync. 2. Automatically determine the latencies of the devices I'm talking to. In theory, this should be possible. For instance, if timidity is connected to jack, it could get jack's current latency, add its own latency, and report the result. Is this science fiction? Any thoughts on these issues would be appreciated! Best, Peter

18 years, 8 months

[linux-audio-dev] voice/video calls/conferencing and JACK (was: Re: Mix Minus with AM-Pitchshift; a study in LinuxAudio usability)

by Kai Vehmanen

Hello all, sorry for cross-posting to lad -- this just in case there are any interested developers out there interested in this topic... On Fri, 29 Jul 2005, Dan Mills wrote: >> Imagine the ease and fun of having asterisk hooked up to jack and >> doing voip;) > Does anyone know of a SIP or asterisk client that does jack? This is still very much work in progress, but FarSight project - http://farsight.sf.net - is working on to create a library for handling audio/video calls and conferencing, with multi-protocol (SIP, MSN, etc) support, and built on top of the gstreamer media framework. I'm involved with adding SIP support (very much standard compliant, and open-source) to the project. And, as gstreamer has JACK support (btw; Andy Wingo from gstreamer was one of the early members of the JACK team), you will be able to do lots of nice stuff with this technology (= with apps utilizing FarSight) once the project matures a bit more. It is still open who will first adopt FarSight, but it is targetted towards IM apps such as Gaim, aMSN, Kopete, etc... and who knows what in the end. If anyone is interested, come and take a look at the project and join the fun! :) I'm not an official FarSight developer (at least not yet :)), so detailed questions should probably be directed to the FarSight mailing lists... > Ideally something command line that can be controlled via tcp messages? You can already do some basic audio/video streaming over RTP to/from JACK using just gst-launch (put together chains of rtp, codec and jack sink/sources). This can be easily controlled from the command-line. But, but, as mentioned already, this is still work in progress... -- http://www.eca.cx Audio software for Linux!

18 years, 8 months

[linux-audio-dev] [ANN] JAPA Jack/Alsa Perceptual Analyser

by fons adriaensen

The first (alpha) release of JAPA is now available at <http://users.skynet.be/solaris/linuxaudio> >From the README: JAPA is a 'perceptual' or 'psychoacoustic' audio spectrum analyser. This means that the filters that are used to analyse the spectrum have bandwidths that are neither constant (as in JAAA), nor proportional to the center frequency (as in a 1/3 octave band analyser), but tuned to human perception. With the default settings, JAPA uses a filter set that closely follows the Bark scale. In contrast to JAAA, this is more an acoustical or musical tool than a purely technical one. Possible uses include spectrum monitoring while mixing or mastering, evaluation of ambient noise, and (using pink noise), equalisation of PA systems. JAPA allows you to measure two inputs at the same time, compare them, store them to memory and compare them to stored traces. It offers a number of resolutions, speeds, and various display options. The dual inputs and memories will find their way into future JAAA versions as well. This is a source release. You will also need libclalsadrv, libclthreads (from the same place), and libfftw3f. Enjoy ! -- FA

18 years, 8 months

[linux-audio-dev] trouble binding multiple ice1712 devices

by Frank van de Pol

Hi folks, I'm having some trouble building a working asound.conf to get my soundcards functional using jack. The audio hardware consists of 3 Terratec ice1712 boards: 2x EWS88/D + 1x Phase88, hooked up using the EWS connect clock synchronisation cables. My goal is to get full duplex audio I/O for my home studio: 16 channels ADAT in/out and 8 channels analogue in/out. I verified that this configuration works from my old windows 2000 partition (using the terratec ASIO driver). Till now I did not succeed getting this gear fully working in my linux environment; it seems that I'm having trouble with the asound.conf to setup the binding for the devices. - running jack addressing the hw: devices directly works flawless; but that way I can only use one card at a time - as per descriptions from the mailing list archive I tried to setup an aggregate device using the alsa multi type plugin. Since Jack needs to mmap the buffer it needs an additional route type plugin to make the capture stream interleaved. However, at this stage I run into a few issues: * due to the different number of ports the ice1712 has for playback (12) and capture (10) I can't do full duplex I/O. * when I do a capture only from the route plugin I hear a distorted sound (quiet, metalic, you can hear the rhythm from the orignal track), which I suspect is caused by the route plugin. I can't verify if this effect is specific to my 64bit machine or also present on 32bit * I tried to setup different input/output for capture and playback using the asym plugin type, but this attempt caused jackd to kill the graph after a few seconds full of xruns. If anyone has a pointer to or copy of a working asound.conf for multitrack recording/playback using multiple ice1712 based cards I'd be very interested to see those. Some details about the software I'm running: Advanced Linux Sound Architecture Driver Version 1.0.9b. kernel 2.6.12-gentoo-r4 on AMD64 hardware Jackd 0.99.0 Here's my non-functional attempt at a asound.conf for binding 2 Terratec EWS88/D cards: ============================================================================= # card0 is the onboard via82xx / ac97 sound # # card1 is a EWS88/D (ADAT 1-8) # card2 is a EWS88/D (ADAT 9-16) # card3 is a Phase88 (analog 17-24) # # card4 is a Midiman Midisport 4x4 USB Midi interface #default pcm.!default { type hw card 0 } ctl.!default { type hw card 0 } # Terratec EWS88/D hardware # pcm.ews_0 { type hw card 1 } ctl.ews_0 { type hw card 1 } pcm.ews_1 { type hw card 2 } ctl.ews_1 { type hw card 2 } # Aggregate of the 2 EWS88/D cards # ctl.ews_16 { type hw card 1 } pcm.ews_16 { type multi slaves.a { pcm "ews_0" channels 12 } slaves.b { pcm "ews_1" channels 12 } bindings [ # adat 1-8 {slave a channel 0} {slave a channel 1} {slave a channel 2} {slave a channel 3} {slave a channel 4} {slave a channel 5} {slave a channel 6} {slave a channel 7} # spdif card 1 #{slave a channel 8} #{slave a channel 9} #{slave a channel 10} #{slave a channel 11} # adat 9-16 {slave b channel 0} {slave b channel 1} {slave b channel 2} {slave b channel 3} {slave b channel 4} {slave b channel 5} {slave b channel 6} {slave b channel 7} # spdif card 2 #{slave b channel 8} #{slave b channel 9} #{slave b channel 10} #{slave b channel 11} ] } # jack can't mmap the streams above since they are # scattered around at different memory locations ctl.ews_jack { type hw card 1 } pcm.ews_jack { # asym allows for different handlng of in/out devices type asym playback.pcm { type route slave.pcm "ews_16" ttable.0.0 1 ttable.1.1 1 ttable.2.2 1 ttable.3.3 1 ttable.4.4 1 ttable.5.5 1 ttable.6.6 1 ttable.7.7 1 ttable.8.8 1 ttable.9.9 1 ttable.10.10 1 ttable.11.11 1 ttable.12.12 1 ttable.13.13 1 ttable.14.14 1 ttable.15.15 1 #ttable.16.16 1 #ttable.17.17 1 #ttable.18.18 1 #ttable.19.19 1 } capture.pcm { type route slave.pcm "ews_16" ttable.0.0 1 ttable.1.1 1 ttable.2.2 1 ttable.3.3 1 ttable.4.4 1 ttable.5.5 1 ttable.6.6 1 ttable.7.7 1 ttable.8.8 1 ttable.9.9 1 ttable.10.10 1 ttable.11.11 1 ttable.12.12 1 ttable.13.13 1 ttable.14.14 1 ttable.15.15 1 #ttable.16.16 1 #ttable.17.17 1 #ttable.18.18 1 #ttable.19.19 1 #ttable.20.20 1 #ttable.21.21 1 #ttable.22.22 1 #ttable.23.23 1 } } ============================================================================= Cheers, Frank. -- +---- --- -- - - - - | Frank van de Pol -o) A-L-S-A | FvdPol(a)coil.demon.nl /\\ Sounds good! | http://www.alsa-project.org _\_v | Linux - Why use Windows if we have doors available?

18 years, 8 months

[linux-audio-dev] any update on the pcmcia bug blocking Audigy2 notebook sound card driver development

by Raymond Lai

Hi all, I remember there's a kernel pcmcia bug preventing the development for the Audigy2 pcmcia notebook sound card driver. See http://www.alsa-project.org/alsa-doc/index.php?vendor=vendor-Creative_Labs#… Is there any new updates on the situation? Has the bug been fixed? or anyone working on it? Thanks, Raymond

18 years, 8 months

[linux-audio-dev] Creative Audigy2 ZS PCMCIA Notebook Sound Card

by Raymond Lai

Hi all, I remember there's a kernel pcmcia bug preventing the development of the Audigy2 pcmcia notebook sound card. Is there any new updates on the situation? Any chance that the card will be supported in the near future? i.e. within 1 or 2 years? Thanks, Raymond

18 years, 8 months

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

Linux-audio-dev August 2005