Another solution for 4x ADAT i/o: 2 RME hammerfall cards, turned into
1 alsa virtual card.
I'm using 2 digi9636 cards and am getting rock-solid performance at
low latencies.
----- Original Message -----
From: linux-audio-dev(a)lists.linuxaudio.org
To:<linux-audio-dev(a)lists.linuxaudio.org>
Cc:
Sent:Sun, 29 Jan 2017 12:00:01 +0000
Subject:Linux-audio-dev Digest, Vol 119, Issue 7
Send Linux-audio-dev mailing list submissions to
linux-audio-dev(a)lists.linuxaudio.org
To subscribe or unsubscribe via the World Wide Web, visit
http://lists.linuxaudio.org/listinfo/linux-audio-dev
or, via email, send a message with subject or body 'help' to
linux-audio-dev-request(a)lists.linuxaudio.org
You can reach the person managing the list at
linux-audio-dev-owner(a)lists.linuxaudio.org
When replying, please edit your Subject line so it is more specific
than "Re: Contents of Linux-audio-dev digest..."
Today's Topics:
1. Re: RME Digiface USB ? (Adrian Knoth)
----------------------------------------------------------------------
Message: 1
Date: Sat, 28 Jan 2017 15:50:02 +0100
From: Adrian Knoth <adi(a)drcomp.erfurt.thur.de>
To: Damien Zammit <damien.zammit(a)gmail.com>
Cc: linux-audio-dev(a)lists.linuxaudio.org
Subject: Re: [LAD] RME Digiface USB ?
Message-ID: <20170128145002.GH22406(a)ltw.loris.tv>
Content-Type: text/plain; charset=us-ascii
On Sat, Jan 28, 2017 at 07:27:21PM +1100, Damien Zammit wrote:
> Hey,
Hi!
> Anyone got one of these? Does it work with GNU/Linux (yet)?
> Curious about xrun performance with 4x ADAT i/o over USB2...
Last time I spoke with someone from RME (that was probably back in
2012
or 2013), they were unwilling to give us their USB drivers (let's say
to
maintain their competitive edge) nor to document the protocol (why
would
they, the driver is free to change it at any point in time).
That said, I see three options:
1. Get an EXBOX.UMA. 32in/32out ADAT/MIDI/USB. The company is super
helful, provided all the specs and enabled me to write a working
driver:
https://plus.google.com/+adiknoth/posts/PddEdbm7PNj
The product is discontinued, but if you want to polish the driver a
bit,
I can lend you mine indefinitely. Should be fully functional, only
the
control software could use a decent UI (I tried HTML5 talking to an
HTTP-to-MIDI server in Go but then had no time to finish it - cmdline
is
ready, though)
2. Reverse-Engineer the RME protocol. Probably lots for work.
Basically
what folks did when FFADO started, but it's cumbersome to interpret
individual bits in a long bitstream just to spot the individual
samples.
And even then it'd be another six months to write the driver.
3. Talk to RME (I can give you a contact) and try to get hold of
their
driver sources or a protocol spec. Both is very unlikely, especially
since they were repeatedly unwilling to reveal anything that involves
the new TotalMix.
The other option is to forget about USB2 and look at other connectors
like Thunderbolt (ultimately external PCIe) or Ravenna/AVB. And last
not
least, there's an ALSA driver for Dante somewhere.
Speaking of Thunderbolt: if you just want 4xADAT, you can always put
an
RME RayDat or one of the Marian cards in an external Thunderbolt
enclosure.
HTH
--
mail: adi(a)thur.de http://adi.thur.de PGP/GPG: key via keyserver
------------------------------
Subject: Digest Footer
_______________________________________________
Linux-audio-dev mailing list
Linux-audio-dev(a)lists.linuxaudio.org
http://lists.linuxaudio.org/listinfo/linux-audio-dev
------------------------------
End of Linux-audio-dev Digest, Vol 119, Issue 7
***********************************************
