Linux-audio-dev

linux-audio-dev@lists.linuxaudio.org

3 participants
7520 discussions

by Hermann Meyer

been pushed to the guitarix git repository. Those are simulations of the following pedals: Fuzz Face JH1 Fuzz Face Fuller Mods Fuzz Face Roger Mayer Foxey Lady Colorsound Tonebender Sustainer+Muff (Big Muff Pi) Screamig Bird Hornet High Frequency Brightener LPB-1 Booster Hogs Foot They are generated from schematic files, with our Ampsim Toolkit. http://sourceforge.net/p/guitarix/blog/2015/03/j-hendrix-fuzz-face/ Schematic files (gschem) been included in the tools directory. regards hermann

10 years, 6 months

Re: [LAD] AVB not so dead after all

by Leonardo Gabrielli

Hello Reuben, I have been talking to a Intel guy at the last AES convention and he told me they are supporting AVB (maybe he's reading this list as well). Another strong signal regarding AVB not dead. We were specifically talking about audio networking and multimedia. Best -- Leonardo Gabrielli, PhD Research Fellow A3Lab - DII - Università Politecnica delle Marche, Ancona, Italy skype: leonardo.gabrielli

10 years, 6 months

JACK and vanilla 3.19.2 startup issue

by Harry van Haaren

Hi All, As root, starting JACK1 0.124.1 on an almost totally vanilla 3.19.2-1-ARCH kernel fails. Output of kernel with JACK1 issue is pasted below[1]. The same system works fine with the 3.18.9-rt5-1-rt kernel. Running "groups" tells me there is no group other than "root", so JACK seems to misinterpret that there is an audio group on the "broken" kernel. Any suggestions as to what's going on? Thanks, -Harry PS: I'm aware of the reasons to not run JACK as the root user or login as root for daily use. [1] Output while running "broken" kernel: [root@audio ~]# jackd -ddummy jackd 0.124.1 Copyright 2001-2009 Paul Davis, Stephane Letz, Jack O'Quinn, Torben Hohn and others. jackd comes with ABSOLUTELY NO WARRANTY This is free software, and you are welcome to redistribute it under certain conditions; see the file COPYING for details JACK is running in realtime mode, but you are not allowed to use realtime scheduling. Your system has an audio group, but you are not a member of it. Please add yourself to the audio group by executing (as root): usermod -a -G audio (null) After applying these changes, please re-login in order for them to take effect. You don't appear to have a sane system configuration. It is very likely that you encounter xruns. Please apply all the above mentioned changes and start jack again!

10 years, 6 months

question re: waf cprogram

by Dave Phillips

Greetings, The error and repair attached below come from my attempts to build gmidimonitor on Fedora 19. As you can see, gcc is not what's required to complete the build, but waf's cprogram calls gcc, not g++. Alas, I can't find much information about the cprogram directive, and I'm always out of my depths when C++ is involved. Before anyone decides it's an "old code" issue, be advised that I have to perform the same operation on the latest git pulls of xjadeo. I'd like to know if there's a global solution, or at least a compile-time export I can use to resolve the problem. Fedora 19 x86_64, GCC 4.8.3 TIA! Best, dp [dlphilp@localhost gmidimonitor-3.6]$ ./waf Waf: Entering directory `/home/dlphilp/src/gmidimonitor-3.6/build' [10/10] cprogram: build/main.c.0.o build/about.c.0.o build/path.c.0.o build/gm.c.0.o build/log.c.0.o build/memory_atomic.c.0.o build/sysex.c.0.o build/jack.c.0.o build/alsa.c.0.o -> build/gmidimonitor /usr/lib/gcc/x86_64-redhat-linux/4.8.3/../../../../lib64/libjack.so: undefined reference to `std::__detail::_List_node_base::_M_unhook()@GLIBCXX_3.4.15' /usr/lib/gcc/x86_64-redhat-linux/4.8.3/../../../../lib64/libjack.so: undefined reference to `std::__detail::_List_node_base::_M_hook(std::__detail::_List_node_base*)@GLIBCXX_3.4.15' collect2: error: ld returned 1 exit status Waf: Leaving directory `/home/dlphilp/src/gmidimonitor-3.6/build' Build failed -> task failed (exit status 1): {task 40700176: cprogram main.c.0.o,about.c.0.o,path.c.0.o,gm.c.0.o,log.c.0.o,memory_atomic.c.0.o,sysex.c.0.o,jack.c.0.o,alsa.c.0.o -> gmidimonitor} ['gcc', 'main.c.0.o', 'about.c.0.o', 'path.c.0.o', 'gm.c.0.o', 'log.c.0.o', 'memory_atomic.c.0.o', 'sysex.c.0.o', 'jack.c.0.o', 'alsa.c.0.o', '-o', '/home/dlphilp/src/gmidimonitor-3.6/build/gmidimonitor', '-Wl,-Bstatic', '-Wl,-Bdynamic', '-lgtk-x11-2.0', '-lgdk-x11-2.0', '-latk-1.0', '-lgio-2.0', '-lpangoft2-1.0', '-lpangocairo-1.0', '-lgdk_pixbuf-2.0', '-lcairo', '-lpango-1.0', '-lfreetype', '-lfontconfig', '-lgobject-2.0', '-lglib-2.0', '-lgthread-2.0', '-lglib-2.0', '-lgmodule-2.0', '-lglib-2.0', '-ljack', '-lasound', '-llash', '-lpthread', '-luuid', '-ljack', '-lasound', '-pthread', '-pthread', '-pthread', '-pthread', '-Wl,--export-dynamic', '-pthread'] [dlphilp@localhost gmidimonitor-3.6]$ cd build/ [dlphilp@localhost build]$ g++ main.c.0.o about.c.0.o path.c.0.o gm.c.0.o log.c.0.o memory_atomic.c.0.o sysex.c.0.o jack.c.0.o alsa.c.0.o -o /home/dlphilp/src/gmidimonitor-3.6/build/gmidimonitor -Wl,-Bstatic -Wl,-Bdynamic -lgtk-x11-2.0 -lgdk-x11-2.0 -latk-1.0 -lgio-2.0 -lpangoft2-1.0 -lpangocairo-1.0 -lgdk_pixbuf-2.0 -lcairo -lpango-1.0 -lfreetype -lfontconfig -lgobject-2.0 -lglib-2.0 -lgthread-2.0 -lglib-2.0 -lgmodule-2.0 -lglib-2.0 -ljack -lasound -llash -lpthread -luuid -ljack -lasound -pthread -pthread -pthread -pthread -Wl,--export-dynamic -pthread [dlphilp@localhost build]$ ls about.c.0.o alsa.c.0.o c4che config.h config.log gm.c.0.o gmidimonitor jack.c.0.o log.c.0.o main.c.0.o memory_atomic.c.0.o path.c.0.o sysex.c.0.o

10 years, 6 months

io GNU/Linux 2015.03 released

by Manu Kebab

Hi all, New images are ready for testing ;) io GNU/Linux is a Live DVD/USB based on Debian Sid and focused on multimedia. Kernel 4.0.4 and 4.0.4-rt, Jack2+AlsaLoop as default sound server (can be easily changed to Jack2+ZitaBridge, Jack2+PulseAudio, PulseAudio or Alsa) e18 as desktop environment and a big collection of installed software... Full persistence for USB install (with encryption) and more stuff... For more infos: manual, packages list, screenshots, video etc... Visit: -> http://io.gnu.linux.free.fr -> https://sourceforge.net/projects/io-gnu-linux/ Installer has been rewritten, and a lot of work has been done to improve security of live persistent users. Feedbacks welcome, enjoy :) MK

10 years, 6 months

Pledgie GSequencer v0.4.3

by Joël Krähemann

Hi all Please visit and enjoy some updates like compile linux realtime kernel 4.0.4-rt1 or hardened Advanced Gtk+ Sequencer and for sure call for donation. http://gsequencer.org https://pledgie.com/campaigns/29411 cheers Joël

10 years, 6 months

Re: [LAD] [alsa-devel] Fw: Using loopback card to Connect GSM two way call to the real sound card UDA1345TS

by Clemens Ladisch

Srinivasan S wrote: > 2. Could you please let me know, I have downloaded jack-1.9.10.tar.bz2, how this needs to be installed in my rootfs IIRC Jack uses some non-standard build system. Try asking on the Jack mailing list how to cross-compile it. Please note that the ALSA Jack plugin is part of the alsa-plugins package. And as I already mentioned, it is unlikely that Jack will use less CPU than dshare. Regards, Clemens

10 years, 6 months

LV2 control port (parameter) value scaling and mapping?

by Christopher Arndt

Is there a way to have the value range of a control input port of a LV2 plugin be in one range (e.g. 0.0f..1.0f or 0-127) and have the LV2 host display the values scaled or mapped to a different range (e.g. 20-20,000 Hz or 2 - 2000 ms)? I know about lv2:scalePoints and the lv2:enumeration property to handle list of discrete values and the units:unit properties to set the value unit, but how do I map the actual values of a large continuous range? Is there a way to define a transfer function? Or does that need to happen inside the plug-in code? And what about more advanced parameter display, e.g. a wet/dry setting, which I want to display as going from 100:00 through 50:50 to 0:100, but the actual parameter value is just 0.0..1.0 (or -1.0..+1.0)? Background: I'm trying to improve the JX10.ttl from the mda.lv2 collection [1], so that the parameter display in the LV2 host generated plug-in UI is more useful and intuitive, i.e. instead of e.g. the slider for OSC Tuning being going from 0.0 .. 1.0, I want it to be displayed as -24 .. +24 cents. All control input ports of the plugin are defined as taking a value 0.0f..1.0f. [1] http://svn.drobilla.net/lad/trunk/plugins/mda.lv2/ Chris

10 years, 7 months

crosstalk between jack clients/ports?

by Vaclav Mach

Hi, I have the following system based on Jack API already working: /**** single PC configuration *** Jack Connections: system_capture_port->jack_port_in (jack_client_in) jack_port_out (jack_client_out)->system_playback_port process of jack_client_in: jack_port_in buffer->ringbuffer thread1: ringbuffer -> RTP stream process of jack_client_out: ringbuffer->jack_port_out buffer thread2: RTP stream -> ringbuffer *******/ Both of the clients are maintained by the same application. Sound transmission between two PCs is working well, sound is nice, we can talk to each other (something like VoIP). However, a person speaking at PC1 hears his own echo delayed and attenuated. I have found out, that the echo comes from PC2 through the RTP stream (reason of the delay). And now, the most interesting observation is that when I disconnect the Jack connection between jack_port_out and system_playback_port at PC2, the echo at PC1 is no more audible. I want to avoid the echo and I have two ideas where the problem can be: 1) there is a crosstalk between jack ports/clients 2) there is a crosstalk in my HW (mainboard sound device with intel_hda driver) Any advice or suggestion? Thanks, Vaclav

10 years, 7 months

[ANN] Qtractor 0.6.7 - The Lepton Acid beta release!

by Rui Nuno Capela

It's alive! Qtractor 0.6.7 (lepton acid beta) is out! Release highlights: * MIDI instrument rendering on audio export (NEW) * MIDI clip editor view/event criteria persistence (NEW) * MIDI clip editor resilience on record/overdub (FIX) * Generic plugin form position persistence (NEW) * JACK Transport/Timebase master option (NEW) and yet more tiny lurking critters swatted ;) Well, the major highlight to this release is in fact this brand new and way long overdue feature, seamlessly integrated to the faithful and regular audio track export function: MIDI track instrument plug-in rendering and mix-down (aka. freeze) is now real, as long their audio output goes onto selected buses, aka. stems, mix-groups, whatever a mix/mastering head would name it! nb. on the (very esquisite) Qtractor arch-model parlance, those are just called "audio output buses" and that ain't gonna change, any time soon, so stop it! A word of caution must be told by now: dedicated (JACK) audio output ports are off-the-grid, so sorry. Maybe this silently makes a notch towards the DAW epitome, though Qtractor still claims to be just a plain and honest sequencer--with yet another DAW-like feature addition--the same as it ever was. Nuff said. Qtractor [1] is an audio/MIDI multi-track sequencer application written in C++ with the Qt framework [2]. Target platform is Linux, where the Jack Audio Connection Kit (JACK [3]) for audio and the Advanced Linux Sound Architecture (ALSA [4]) for MIDI are the main infrastructures to evolve as a fairly-featured Linux desktop audio workstation GUI, specially dedicated to the personal home-studio. Website: http://qtractor.sourceforge.net Project page: http://sourceforge.net/projects/qtractor Downloads: http://sourceforge.net/projects/qtractor/files - source tarball: http://download.sourceforge.net/qtractor/qtractor-0.6.7.tar.gz - source package (openSUSE 13.2): http://download.sourceforge.net/qtractor/qtractor-0.6.7-17.rncbc.suse132.sr… - binary packages (openSUSE 13.2): http://download.sourceforge.net/qtractor/qtractor-0.6.7-17.rncbc.suse132.i5… http://download.sourceforge.net/qtractor/qtractor-0.6.7-17.rncbc.suse132.x8… - wiki (help wanted!): http://sourceforge.net/p/qtractor/wiki/ Weblog (upstream support): http://www.rncbc.org License: Qtractor is free, open-source software, distributed under the terms of the GNU General Public License (GPL [5]) version 2 or later. Change-log: - MIDI clip editor (aka. piano-roll) position, size, and view/event type criteria are now persistent, across session and user preferences application state. - Generic plugin form widget position is now also preserved across open/save session cycles. - MIDI clip editor resilience is about to get an improvement, fe. it doesn't close on stopping record/overdub anymore. - Introducing (JACK) Timebase master setting as an option to Transport mode (cf. View/Options.../General/Transport/Timebase). - LV2 plug-in MIDI/Event support now slanted for deprecation. - Spanish (es) translation added, by avid Reyes Pucheta. - It's live: audio track export (cf. Track/Export Tracks/Audio...) has been deeply refactored to finally include MIDI track/instrument plugins rendering (aka. freeze) on selected audio output buses on mix-down. (EXPERIMENTAL) - MIDI file player now does (N)RPN 14-bit controller events. - Track properties dialog output bus switch fix/optimization; also fixed multiple DSSI instance reference count on close. - Fixed for some strict tests for Qt4 vs. Qt5 configure builds. - German (de) translation update (by Guido Scholz, thanks). References: [1] Qtractor - An audio/MIDI multi-track sequencer http://qtractor.sourceforge.net [2] Qt framework, C++ class library and tools for cross-platform application and UI development http://qt.io/ [3] JACK Audio Connection Kit http://jackaudio.org [4] ALSA, Advanced Linux Sound Architecture http://www.alsa-project.org/ [5] GPL - GNU General Public License http://www.gnu.org/copyleft/gpl.html See also: http://www.rncbc.org/drupal/node/894 Enjoy && keep the fun. -- rncbc aka. Rui Nuno Capela

10 years, 7 months

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

Linux-audio-dev