14 Mar
2011
14 Mar
'11
5:02 p.m.
On Mon, Mar 14, 2011 at 02:11:00PM +0200, Alfs Kurmis wrote:
What typical comes in to FFT function ? Pointer to
already windowed
array of samples ?
Yes.
What return FFT ?
Either it overwrites the input, or it needs a second pointer
to the output array.
Function return value: up to you, normally you don't need one.
What exact physical dimensions return FFT , if input
function
dimensions was - voltage depends from (time) U=U(t) ?
The dimension of the data is the same in both domains.
If one is a function of T, then the other is a function
of 1/T (for example: T = time, 1/T = frequency).
How from ...1024 or 2048 or 4096... FFT return values
i calculate
power magnitudes for all bands,
and finally values for visual 10-20 hopping bars, like in Winamp ,
XMMS , QMMP ... ?
If you want such a display the FFT is not a good way to do it.
It's possible but not simple if you want a correct result.
If i exact know my FFT window size [for example 4096
samples] and
window type , and it will be constant forever,
is it possible to calculate window(,sine,cosine,) and store all
values in constant array,
so that in runtime it do not need be calculated , but i can just
take values form array ?
Yes.
43303.2715 + 796.7285 = 44100 or 44100 - 43303.2715 =
796.7285>
Why Frequency 796.7285 is mirrored as Frequency 43303.2715 , and
magnitude for both Frequencies is divided by 2 ????
Because you are using a complex FFT, and the imaginary part
of your signal is zero. That means that the spectrum must be
symmetric.
Is here way direct calculate full magnitude and
without Frequency
mirroring , in band 0 Hz ... FSampl/2 ONLY ,
Use an FFT operating on real data instead of complex.
Ciao,
--
FA