4 Apr
2014
4 Apr
'14
11:48 p.m.
Hi, Christian!
I also own this device. Linux / kernel 3.13.8 is still lacking proper
support (the patch + x) for it. No audio device comes up.
I did some reverse engineering just to find out that it's an
proprietary Yamaha SSP2 DSP inside which has YC706A0 SSP2 on his
number plate. This is very likely a NEC (now Renesas) based design.
I even found the Pinout of a Chip like this (which is also referenced as
uPD800500F1-11-KN), but there is no hardware/software reference
manual available - shame on Steinberg! This thing could also be
fed with firmware which might be extracted from the Windows drivers
AFAICT.
Let me know when you want me to test something for you.
Regards,
Clemens
--
On 04/04/2014 09:56 PM, covux wrote:
Hello,
first thanks for the quirks-table.h patch.
I got it working with some restrictions under 3.13/3.14 vanilla kernel.
The card works fine, after disabling USB 3.0 (Lenovo T440s).
I can set samplerates up to 192khz with 512 Frames
using jack.
With USB 3.0 i can only set samplerates up to 48khz
and get multiple errormessages like:
[ 18.950994] 6:2:1: cannot get freq at ep 0x86
[ 142.670841] retire_capture_urb: 911 callbacks suppressed
After a while the card stops working and jack crashes.
I would really like to help, making full linux support for this device
happen.
I can provide more info if needed.
Cheers,
Christian
--
View this message in context:
http://linux-audio.4202.n7.nabble.com/Support-for-Steinberg-UR22-Yamaha-USB…
Sent from the linux-audio-dev mailing list archive at Nabble.com.
_______________________________________________
Linux-audio-dev mailing list
Linux-audio-dev(a)lists.linuxaudio.org
http://lists.linuxaudio.org/listinfo/linux-audio-dev