16 Jan
2004
16 Jan
'04
4:21 p.m.
On Thu, 2004-01-15 at 10:41, Matthias Nagorni wrote:
I just checked it out. The problem is solved by
choosing the right
conversion mode in the converter module (V/Octave --> 0..1, 1=rate/2).
So it seems like the exported LADSPA control ports do work. Note that
the voltages of the GUI slider and the exported port are added, therefore
you need to set the Frequency slider to 0 in your case.
I've tried all three and none work, but on a conceptual basis.. the
plugin wants Hz, not 0-1.
Many useful proposals (e.g. polyphony change at
runtime, distinction
between control and audio ports so that control data can behandled at
1/16 audio rate which improves speed a lot, distict audio and gui part)
can not easily be realized within the current design. Moreover at least
a part of the source has been written quite in a hurry so that it is not
very clean.
A rewrite does not at all mean that the effort which has gone into ams is
wasted. One can learn from ams and maybe even copy some code from it.
However I would suggest to envisage a larger scale project now in the way
that Fons has suggested.
Matthias
That's basically what I was wondering/looking for. Of course, (to be
the pedant) my view for this project is "larger scale" in scope and
usefullness perhaps, but not actual project size.