6 Dec
2002
6 Dec
'02
10:54 p.m.
Fernando Pablo Lopez-Lezcano wrote:
Where are the lowlat and preempt patches for 2.4.20?
The most recent preempt I see is preempt-kernel-rml-2.4.20-pre10-ac2-1:
http://www.tech9.net/rml/linux/
And the most recent lowlat is for 2.4.19:
http://www.zip.com.au/~akpm/linux/schedlat.html#downloads
Are there other places I should be looking for these?
Thanks,
Eric Rz.
Fernando Pablo Lopez-Lezcano wrote:
To add one more datapoint to the thread and (apparently good news): I'm
testing 2.4.20 (final) + lowlat + preempt + acpi + alsa + jack and the
computer seems to be chugging along nicely. This is with today's alsa. A
slighly older alsa did lock the computer after 5 or so minutes of jack
activity but I managed to reboot it with the sysrq magic key. With the
newest alsa I got jack + freqtweak + ams (with the demo patch) running
for 50 minutes until for some reason jack died due to a watchdog
interrupt. Not bad. Have you tried anything in between pre10-ac3 and
pre4? I know pre4 works
fine. I probably should post to the lkml with as much detail as we can
get (unless some kernel hacker is actually reading these messages).
I've tried every kernel from 2.4.20-pre5 up to 2.4.20-pre10, and again
2.4.20-pre10-ac3, which caused a lockup on my system in the past, this
afternoon. And I couldn't reproduce even _one_ lockup. I use another IDE
interface though: a cmd649 add-on controller. The lockups happened with
the onboard IDE interface (VIA KT333 chipset, vt8235 southbridge). -- Fernando
-------------------------------------------------------
This sf.net email is sponsored by:ThinkGeek
Welcome to geek heaven.
http://thinkgeek.com/sf
_______________________________________________
Jackit-devel mailing list
Jackit-devel(a)lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/jackit-devel