Re: [linux-audio-dev] jack.udp issues

Lee Revell wrote: the switch is a Catalyst which i dont remember the mode, it has 48 FE plus two optic fiber, the two hosts are on the same subnet so no routing is required, btw i've tried without any switch and the issue is still there for the records i've been able to set up a working (but i've not stressed it) configuration like this jackudp recv (the same x86 computer) with alsa driver ^ | | (cable, 100mbps) | router: powerpc laptop (the same) | | (802.11b ad-hoc network) | jackudp send (a sony vaio of a couple of years ago) with alsa driver with this i started alsaplayer on the vaio and the other x86 host was correctly playing music with no xruns due to network transport or, btw, no artifacts on the audio that was only a 3 minute test, just the time of the song i've listened :P dont know if in this short time can occour an audible clock drift or anything like that, so it seems jack needs some timing information from the soundcard/driver subsystem. i wonder if that can be abstracted at jack level (nor at driver level) wil ---