"Tim Goetze" <tim(a)quitte.de> writes:
  fwiw, i'm achieving quite satisfying results
driving MIDI out from a
 1024 Hz RTC thread, with external hardware locking steadily onto the
 output MIDI clock stream, even at tempi up to 240 bpm.
 MIDI out jitter is about the audio block size at max. DSP load (~1.3
 ms) during audio processing cycles, a fraction of a millisecond for
 the difference between 1024 Hz and the wanted MIDI clock frequency
 otherwise; however this seems to be no problem for the hardware
 attached (a fairly recent synthesizer and infrequently an aging cheap
 drum machine).
 at lower RTC frequencies, the jitter effect on the MIDI h/w becomes
 noticeable (erratic rubato) but it still locks on.
 thus, i must disagree with your 'no way'. 
Could you point me to some code examples on how you do this? I am an
absolute beginner in this.
--
gerrit