22 Feb
2010
22 Feb
'10
8:07 p.m.
On Mon, 2010-02-22 at 23:51 +0000, Fernando Lopez-Lezcano wrote:
On Tue, 2010-02-16 at 17:58 -0800, Fernando
Lopez-Lezcano wrote:
And this is what strace says:
----
open("/dev/snd/controlC1", O_RDONLY|O_CLOEXEC) = 5
fcntl64(5, F_SETFD, FD_CLOEXEC) = 0
ioctl(5, UI_DEV_CREATE, 0xbff6aef4) = 0
close(5) = 0
open("/dev/snd/hwC1D0", O_RDONLY|O_CLOEXEC) = 5
fcntl64(5, F_SETFD, FD_CLOEXEC) = 0
ioctl(5, 0x80044800, 0xbff6b270) = 0
ioctl(5, SNDRV_HDSP_IOCTL_GET_PEAK_RMS, 0xbff6b57c) = -1 EINVAL (Invalid
argument)
write(2, "HwDep ioctl failed. Metering sto"..., 37HwDep ioctl failed.
Metering stopped
) = 37
close(5) = 0
----
-- Fernando
Hey, has anyone been seeing strange behavior from
this combination?
kernel 2.6.31.x rt20 + alsa 1.0.22 userland
RME card (pcmcia card + multiface)
hdspmixer is not doing the right thing (does not initialize the card in
a way in which playback works), it does not see the hwdep interface (or
something like that) and disables metering,
This is what hdspmixer prints when I attempt to run it:
----
$ hdspmixer
HDSPMixer 1.6 - Copyright (C) 2003 Thomas Charbonnel <thomas(a)undata.org>
This program comes with ABSOLUTELY NO WARRANTY
HDSPMixer is free software, see the file COPYING for details
Looking for HDSP cards :
Card 0 : HDA Intel at 0xfe020000 irq 17
Card 1 : RME Hammerfall DSP + Multiface at 0xc0000000, irq 16
Multiface found !
1 Hammerfall DSP card found.
Initializing default presets
HwDep ioctl failed. Metering stopped
---- alsamixer even
segfaults
when I reach the end of the controls listed. Plain weird. Smells like
something changed deep in the kernel that makes alsa-lib very unhappy.
Alsa-tools rebuilt from source does not make a difference.
Weirdness goes away when I boot into 2.6.29.6 rt23...
Is there anything in alsa-* that depends on which _kernel_ is available
at compile time?
I have been trying to see if I can figure _anything_ out of this...
A diff of 2.6.29 (last known working) against 2.6.31.12 reveals
something that might have an influence on the problem:
in snd_hdsp_create_hwdep there are two lines added:
+ hw->ops.open = snd_hdsp_hwdep_dummy_op;
hw->ops.ioctl = snd_hdsp_hwdep_ioctl;
+ hw->ops.release = snd_hdsp_hwdep_dummy_op;
And snd_hdsp_hwdep_dummy_op just returns 0...
Other differences between the two files (not that many) seem irrelevant
to me.
I imagine this is what is causing the difference in behavior (hwdep
fails). Any suggestions on what I could try to fix this?
Thanks for any help!
-- Fernando
_______________________________________________
Alsa-devel mailing list
Alsa-devel(a)alsa-project.org
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel