10 Aug
2015
10 Aug
'15
9:47 p.m.
----- Forwarded message from Fons Adriaensen <fons(a)linuxaudio.org> -----
Date: Mon, 10 Aug 2015 19:46:15 +0000
From: Fons Adriaensen <fons(a)linuxaudio.org>
To: Paul Davis <paul(a)linuxaudiosystems.com>
Some new evidence which may be useful. It seems the
problem occurs only if at least one client is running
before zita-*2* and jack_delay are started.
In the logfile added below, the lines between the '----'
are the ouput of some printf() added to jack_rechain_graph().
The name of each client is printed as the list is traversed,
(near to top of the main loop) and a '*' is printed when a
new chain is started.
fons@erc-linux1:~> /usr/bin/jackd -P70 -p1024 -u -dalsa -dhw:UA22,0 -r48000 -p256 -n2
jackd 0.124.1
Copyright 2001-2009 Paul Davis, Stephane Letz, Jack O'Quinn, Torben Hohn and others.
jackd comes with ABSOLUTELY NO WARRANTY
This is free software, and you are welcome to redistribute it
under certain conditions; see the file COPYING for details
JACK compiled with System V SHM support.
loading driver ..
apparent rate = 48000
creating alsa driver ... hw:UA22,0|hw:UA22,0|256|2|48000|0|0|nomon|swmeter|-|32bit
configuring for 48000Hz, period = 256 frames (5.3 ms), buffer = 2 periods
ALSA: final selected sample format for capture: 24bit little-endian
ALSA: use 2 periods for capture
ALSA: final selected sample format for playback: 24bit little-endian
ALSA: use 2 periods for playback
------------------------------
------------------------------
# 1. Start Qjackctl
------------------------------
------------------------------
# 2. Start japa
------------------------------
japa
*
------------------------------
# 3. Start zita-j2n
------------------------------
japa
*
zita-j2n
------------------------------
# 4. Start zita-n2j
------------------------------
zita-j2n
*
japa
zita-n2j
------------------------------
# 5. Start jack_delay
------------------------------
zita-n2j
*
japa
zita-j2n
jack_delay
------------------------------
# 6. Connect zita-n2j -> jack_delay
------------------------------
jack_delay
*
zita-j2n
japa
zita-n2j
------------------------------
# This looks already wrong... jack_delay
# can't be first.
# 7. Connect jack_delay -> zita-j2n
------------------------------
zita-n2j
*
japa
jack_delay
zita-j2n
------------------------------
# Correct delay is measured.
# 8. Connect system:capture_1 -> japa_in_1
------------------------------
jack_delay
*
zita-j2n
japa
zita-n2j
------------------------------
# The order of execution is wrong and
# measured delay increases by one period.
# 9. Connect system:capture_2 -> japa_in_2
------------------------------
zita-n2j
*
japa
jack_delay
zita-j2n
------------------------------
# Correct delay measured again.
# 10. Disconnect system:capture_1
------------------------------
jack_delay
*
zita-j2n
japa
zita-n2j
------------------------------
# Wrong again.
# 11. Disconnect system:capture_2
# ------------------------------
zita-n2j
*
japa
jack_delay
zita-j2n
# ------------------------------
# OK
etc. etc.
--
FA
A world of exhaustive, reliable metadata would be an utopia.
It's also a pipe-dream, founded on self-delusion, nerd hubris
and hysterically inflated market opportunities. (Cory Doctorow)
----- End forwarded message -----
--
FA
A world of exhaustive, reliable metadata would be an utopia.
It's also a pipe-dream, founded on self-delusion, nerd hubris
and hysterically inflated market opportunities. (Cory Doctorow)