2 Feb
2011
2 Feb
'11
7:01 p.m.
Tried all the different ports I could. Seems I can't get it on the EHCI
buses no matter which ports I use. Even replugged the front USB cable to the
other ports but it always comes back on the two OHCI busses. Am thinking of
buying a separate PCIE USB card as a temporary work around... I've had to
cancel my studio sessions for the week on account of the systems being down.
ARG!
...Rods ;-)
On Wed, Feb 2, 2011 at 10:48, Gabriel Beddingfield <gabrbedd(a)gmail.com>wrote;wrote:
dmsg, lsusb,
lsusb -t
[ 46.458327] ALSA urb.c:480: frame 0 active: -75
[ 46.461327] ALSA urb.c:480: frame 0 active: -75
[ 46.463328] ALSA urb.c:480: frame 0 active: -75
URB is kind of a bulk transfer protocol. Not sure what this error
message means without digging in.
/: Bus 04.Port 1: Dev 1, Class=root_hub,
Driver=ohci_hcd/6p, 12M
|__ Port 3: Dev 2, If 0, Class=HID, Driver=usbhid, 1.5M
|__ Port 3: Dev 2, If 1, Class=HID, Driver=usbhid, 1.5M
/: Bus 03.Port 1: Dev 1, Class=root_hub, Driver=ohci_hcd/6p, 12M
|__ Port 3: Dev 3, If 0, Class=HID, Driver=usbhid, 1.5M
|__ Port 4: Dev 4, If 0, Class=audio, Driver=snd-usb-audio, 12M
|__ Port 4: Dev 4, If 1, Class=audio, Driver=snd-usb-audio, 12M
|__ Port 4: Dev 4, If 2, Class=audio, Driver=snd-usb-audio, 12M
/: Bus 02.Port 1: Dev 1, Class=root_hub, Driver=ehci_hcd/6p, 480M
/: Bus 01.Port 1: Dev 1, Class=root_hub, Driver=ehci_hcd/6p, 480M
Try plugging it into different USB ports. Looks like you're sharing
it with a mouse or something (possibly internally on the MoBo).
-gabriel