13 Jan
2004
13 Jan
'04
11:52 p.m.
Matthias,
Thank you. It works now.
ams is very cool. :)
-Eric Rz.
Matthias Nagorni wrote:
Hello Eric,
this is a known problem with ALSA 1.0 incompatibility. Has been fixed in
CVS. Solution (from an earlier posing on this list):
Just make the beginning of alsa_driver.h look
like this:
#ifndef __ALSA_DRIVER_H
#define __ALSA_DRIVER_H
#define ALSA_PCM_OLD_HW_PARAMS_API /* <-- These are the lines */
#define ALSA_PCM_OLD_SW_PARAMS_API /* <-- you need to paste in*/
#include <alsa/asoundlib.h>
Matthias
On Sat, 3 Jan 2004, Eric Dantan Rzewnicki wrote:
I found and installed libqt3-compat-headers. The
compile got much
further this time, but still no joy. There are a lot of compiler
warnings and errors. The errors would seem to indicate I'm using an
incompatible alsa version (or ams' alsa support is outdated ... ) I'm
working with the most recent tarball of ams-1.7.1 from sourceforge.
My current settup: (tail end of compiler errors below)
PII 400 768MB
6GB / /dev/hda2
60GB /mnt/audio/ /dev/hdc1
drives tuned
128MB swap /dev/hda1
M-Audio Delta-66 w/omni i/o
debian testing (sarge)
2.4.22-box1-pell-1
alsa-1.0.0rc2
./configure --with-isapnp=no --with-sequencer=yes --with-oss=no \
--with-cards=dummy,virmidi,serial-u16550,mpu401,ice1712,ymfpci
libsndfile-1.0.5
from tar.gz. debian only had 1.0.4
jack-0.91.1
./configure --enable-optimize --with-default-tmpdir=/mnt/ramfs/
--disable-portaudio
ecasound-2.3.2
./configure --enable-pyecasound --disable-oss --disable-arts
/usr/include/alsa/pcm.h:604: error: too few arguments to function `int
snd_pcm_hw_params_get_periods(const snd_pcm_hw_params_t*, unsigned
int*,
int*)'
alsa_driver.cc:150: error: at this point in file
/usr/include/alsa/pcm.h:539: error: too few arguments to function `int
snd_pcm_hw_params_get_format(const snd_pcm_hw_params_t*,
snd_pcm_format_t*)'
alsa_driver.cc:151: error: at this point in file
/usr/include/alsa/pcm.h:531: error: too few arguments to function `int
snd_pcm_hw_params_get_access(const snd_pcm_hw_params_t*,
snd_pcm_access_t*)'
alsa_driver.cc:152: error: at this point in file
alsa_driver.cc:157: error: invalid conversion from `int*' to `
snd_pcm_uframes_t*'
/usr/include/alsa/pcm.h:591: error: too few arguments to function `int
snd_pcm_hw_params_get_period_size(const snd_pcm_hw_params_t*,
snd_pcm_uframes_t*, int*)'
alsa_driver.cc:157: error: at this point in file
alsa_driver.cc:157: warning: comparison between signed and unsigned
integer
expressions
alsa_driver.cc:165: error: invalid conversion from `int*' to `unsigned
int*'
/usr/include/alsa/pcm.h:604: error: too few arguments to function `int
snd_pcm_hw_params_get_periods(const snd_pcm_hw_params_t*, unsigned
int*,
int*)'
alsa_driver.cc:165: error: at this point in file
alsa_driver.cc:165: warning: comparison between signed and unsigned
integer
expressions
/usr/include/alsa/pcm.h:539: error: too few arguments to function `int
snd_pcm_hw_params_get_format(const snd_pcm_hw_params_t*,
snd_pcm_format_t*)'
alsa_driver.cc:170: error: at this point in file
/usr/include/alsa/pcm.h:531: error: too few arguments to function `int
snd_pcm_hw_params_get_access(const snd_pcm_hw_params_t*,
snd_pcm_access_t*)'
alsa_driver.cc:175: error: at this point in file
alsa_driver.cc:183: error: invalid conversion from `int*' to `unsigned
int*'
/usr/include/alsa/pcm.h:604: error: too few arguments to function `int
snd_pcm_hw_params_get_periods(const snd_pcm_hw_params_t*, unsigned
int*,
int*)'
alsa_driver.cc:183: error: at this point in file
/usr/include/alsa/pcm.h:539: error: too few arguments to function `int
snd_pcm_hw_params_get_format(const snd_pcm_hw_params_t*,
snd_pcm_format_t*)'
alsa_driver.cc:184: error: at this point in file
/usr/include/alsa/pcm.h:531: error: too few arguments to function `int
snd_pcm_hw_params_get_access(const snd_pcm_hw_params_t*,
snd_pcm_access_t*)'
alsa_driver.cc:185: error: at this point in file
alsa_driver.cc: In member function `int Alsa_driver::pcm_start()':
alsa_driver.cc:304: warning: comparison between signed and unsigned
integer
expressions
alsa_driver.cc: In member function `int
Alsa_driver::set_hwpar(snd_pcm_t*,
snd_pcm_hw_params_t*, int*)':
alsa_driver.cc:547: error: invalid conversion from `long unsigned int'
to `
unsigned int*'
/usr/include/alsa/pcm.h:557: error: too few arguments to function `int
snd_pcm_hw_params_get_channels_max(const snd_pcm_hw_params_t*,
unsigned
int*)'
alsa_driver.cc:553: error: at this point in file
make: *** [alsa_driver.o] Error 1
Frank Barknecht wrote:
--
Dr. Matthias Nagorni
SuSE Linux AG
Maxfeldstr. 5 phone: +49 911 74053375
D - 90409 Nuernberg fax : +49 911 74053483
Hallo,
Eric Dantan Rzewnicki hat gesagt: // Eric Dantan Rzewnicki wrote:
-------------------------------------------------------
This SF.net email is sponsored by: IBM Linux Tutorials.
Become an expert in LINUX or just sharpen your skills. Sign up for IBM's
Free Linux Tutorials. Learn everything from the bash shell to sys admin.
Click now! http://ads.osdn.com/?ad_id=1278&alloc_id=3371&op=click
_______________________________________________
Alsamodular-devel mailing list
Alsamodular-devel(a)lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/alsamodular-devel
Well ... no luck. The compile will start, but
fails with a lot of errors
-- see below ... I'm sending this to the alsamodular-devel list as well,
but that list seems to be pretty much inactive (only 6 posts in past 5
months). I've heard great things about this synth, but have thus far
been unable to hear it for myself.
Eric Dantan Rzewnicki wrote:
> When I get home I'll try this on my debian testing (sarge) audio box and
> see how far I get. Thanks.
>
> -Eric Rz.
/usr/share/qt3/doc/html/qlist.html is the only file on my system that
comes up in a locate qlist ... it says:
"QList Class Reference (obsolete)
#include <qlist.h>
The QList class has been renamed QPtrList in Qt 3.0. "
Hah, I stumbled over that on Debian, too, but I did find a solution.
You're missing some old headers that aren't anymore in recent QTs
unless you install a package that in D. unstable now is called
libqt3-compat-headers.
But IIRC it was named slightly else on older Debians, although very
similar. Maybe qt3-compat? I'm not sure right now.
ciao
--
Frank Barknecht _ ______footils.org__