9 Mar
2005
9 Mar
'05
9:58 a.m.
krsrtn wrote:
after that I looked at what you said,
/proc/bus/usb/devices::
...
D: Ver= 1.00 Cls=ff(vend.) Sub=ff Prot=ff MxPS=64 #Cfgs= 1
P: Vendor=086a ProdID=0102 Rev= 0.01
C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=100mA
I: If#= 0 Alt= 0 #EPs= 0 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
...
The firmware wasn't loaded.
ok. this is the output of lsusb after I modprobed
emi26:
Bus 004 Device 002: ID 086a:0102 Emagic Soft-und Hardware GmbH
The emi26 module expects the device to have product ID 0100. It seems
you have a new hardware revision.
I'll see if I can update the emi26 driver.
Regards,
Clemens