Rui Nuno Capela ha scritto:
(N is the soundcard index, probably 0 in your case,
but not sure; check it
out from the /proc/asound/cards info) then starting jackd, use the
"hw:N,2" device name instead of just "hw:N" (the later should work
too,
but that's about using the regular alsa interface not the usx2y specific
one).
Good luck :)
uhm.. seems i dont have hw:0,2.. here's what i got
Zeryn:/home/willy/jack-0.99.44.11cvs# modinfo snd-usb-usx2y
filename:
/lib/modules/2.6.10-mm3/kernel/sound/usb/usx2y/snd-usb-usx2y.ko
author: Karsten Wiese <annabellesgarden(a)yahoo.de>
description: TASCAM US-X2Y Version 0.8.7.1
license: GPL
parm: index:Index value for US-X2Y.
parm: id:ID string for US-X2Y.
parm: enable:Enable US-X2Y.
parm: nrpacks:Number of packets per URB.
vermagic: 2.6.10-mm3 preempt gcc-3.3
depends: snd-usb-lib,snd-page-alloc,snd-pcm,snd,snd-hwdep
alias: usb:v1604p8001dl*dh*dc*dsc*dp*ic*isc*ip*
alias: usb:v1604p8007dl*dh*dc*dsc*dp*ic*isc*ip*
alias: usb:v1604p8005dl*dh*dc*dsc*dp*ic*isc*ip*
Zeryn:/home/willy/jack-0.99.44.11cvs# cat /proc/asound/version
Advanced Linux Sound Architecture Driver Version 1.0.8rc2 (Wed Jan 05
06:44:40 2005 UTC).
Zeryn:/home/willy/jack-0.99.44.11cvs# cat /proc/asound/cards
0 [USX2Y ]: USB US-X2Y - TASCAM US-X2Y
TASCAM US-X2Y (1604:8007 if 0 at 001/003)
Zeryn:/home/willy/jack-0.99.44.11cvs# cat /proc/asound/pcm
00-00: US-X2Y Audio : US-X2Y Audio #0 : playback 1 : capture 1
Zeryn:/home/willy/jack-0.99.44.11cvs# cat /proc/asound/hwdep
00-00: /proc/bus/usb/001/003
Zeryn:/home/willy/jack-0.99.44.11cvs#
Zeryn:/home/willy/jack-0.99.44.11cvs# jackd -v -d usx2y -d hw:0,2
getting driver descriptor from /usr/local/lib/jack/jack_alsa.so
getting driver descriptor from /usr/local/lib/jack/jack_dummy.so
getting driver descriptor from /usr/local/lib/jack/jack_oss.so
getting driver descriptor from /usr/local/lib/jack/jack_usx2y.so
jackd 0.99.44.11cvs
Copyright 2001-2003 Paul Davis and others.
jackd comes with ABSOLUTELY NO WARRANTY
This is free software, and you are welcome to redistribute it
under certain conditions; see the file COPYING for details
JACK compiled with System V SHM support.
server `default' registered
loading driver ..
experimental alsa driver ...
hw:0,2|hw:0,2|1024|2|48000|0|0|nomon|swmeter|-|32bit
ALSA lib pcm_hw.c:1155:(snd_pcm_hw_open) open /dev/snd/pcmC0D2p failed:
No such device
ALSA lib pcm_hw.c:1155:(snd_pcm_hw_open) open /dev/snd/pcmC0D2c failed:
No such device
ALSA: Cannot open PCM device alsa_pcm for playback. Falling back to
capture-only mode
cannot load driver module usx2y
registered builtin port type 32 bit float mono audio
Delay Count
----- ---------
1000 0
----- ---------
Total 0
new client: alsa_pcm, id = 1 type 1 @ 0x100216a8 fd = -1
starting server engine shutdown
freeing shared port segments
stopping server thread
last xrun delay: 0.000 usecs
max delay reported by backend: 0.000 usecs
freeing engine shared memory
max usecs: 0.000, engine deleted
no message buffer overruns
cleaning up shared memory
cleaning up files
unregistering server `default'
Zeryn:/home/willy/jack-0.99.44.11cvs#
wil
---
Il jazz e' lasciare che la luce brilli, lasciarla essere.
-- Keith Jarrett