14 Dec
2010
14 Dec
'10
3:36 p.m.
On Tue, 14 Dec 2010 13:40:43 +0100
Ralf Mardorf <ralf.mardorf(a)alice-dsl.net> wrote:
On Tue, 2010-12-14 at 13:36 +0100, Ralf Mardorf
wrote:
I think I understand: by looking at the windows mixer app in the delta
1010 documentation, I see that there is one fader, but in addition,
there is a pan slider per channel. I'm going to venture to guess that
having both sliders in envy24control full up, it is the equivalent of
the windows mixer app channel up and pan center -- this seems logical.
* single strips and pan pots/sliders would make this clearer.
David
On Tue, 2010-12-14 at 06:47 -0500, David
Santamauro wrote:
PS:
Note, there are no pan pots and you not necessarily will have PCM
monitor 1 to the left and 2 to the right, perhaps 1 should be mono
and 2 2 to the left, while 3 is to the right position.
Just a shot in the dark.
Hi Niels,
On Mon, 13 Sep 2010 17:36:11 -0700
Niels Mayer <nielsmayer(a)gmail.com> wrote:
I never use the monitor section. Could it be that it's to root the
PCMs to the left or the right for the stereo sum, comparable to a
mixing console's left/right buttons for the subgroups? Hence L/R
Gang will make one PCM monitor mono for the stereo sum. On Mon, Sep 13, 2010 at 2:25 PM, Ralf Mardorf
<ralf.mardorf(a)alice-dsl.net> wrote:
>Pardon, I didn't follow the progress of envy24control. Did you
>finish
> the recently development and if so, where can we/I get the
> latest source code?
http:// mudita24.googlecode.com
Status: still at 1.03. Waiting for Tim E. Real to commit and
then will release 1.04. Or use Tim's current patches (see link
above).
Niels
http://nielsmayer.com
...quick question on the "Monitor PCMs" tab: Why are there 2
sliders per PCM out? Shouldn't L/R Gang join channels 1 & 2, 3 &
4 etc...
thanks for any insight...
David