14 Dec
2005
14 Dec
'05
2:24 p.m.
On Sun, Dec 11, 2005 at 11:44:32PM +0100, David Kastrup wrote:
>> Ok, and here is the rub: playback is not
perfect, and neither seems
>> to be the sampling. Probably at times error interpolation sets in,
>> probably at times samples get lost or replicated. Not much, perhaps
>> once per minute or so. This leads to audible clicks, of course.
xruns? do you still get the clicks when the card is in loop-back mode?
(this will completely bypass the OS and all driver or xrun issues)
So there is already something going on which I
don't understand. In
"crackle mode", there is basically just noise, but the noise level is
correlated with the amplitude of the sound source.
This sounds like you might possibly be a victim of a known
bug on this hardware. Try changing the "IEC958 In Phase Inverse" switch.
So what would one actually have to do to have the
"incoming spdif
clock" respected?
There is nothing to set on this card. It automatically syncs to
the incoming spdif when this input is selected.
cheers
--
Tim Orford