11 Aug
2003
11 Aug
'03
2:56 p.m.
paul wisehart wrote:
I have this error that I don't know how to fix.
I was using Craig Stuart Sapp's Midiio library to control
the Emu10k1 wave-table synth. It *was* working until I reinstalled
my linux system. I have put evrything back the way it was, and
now I get these errors when I use the Midiio library:
--
ALSA lib rawmidi_hw.c:227:(snd_rawmidi_hw_open) open /dev/snd/midiC0D3 failed: No such
device
ALSA lib rawmidi_hw.c:227:(snd_rawmidi_hw_open) open /dev/snd/midiC0D4 failed: No such
device
ALSA lib rawmidi_hw.c:227:(snd_rawmidi_hw_open) open /dev/snd/midiC0D5 failed: No such
device
ALSA lib rawmidi_hw.c:227:(snd_rawmidi_hw_open) open /dev/snd/midiC0D6 failed: No such
device
ALSA lib rawmidi_hw.c:227:(snd_rawmidi_hw_open) open /dev/snd/midiC0D7 failed: No such
device
Hi Paul:
A few questions first:
Did you run './snddevices' after installing the driver ? It
shouldn't be necessary anymore, but in case of problems run it anyway.
What kind of code are you using with Craig's library ? An example
would help me understand what you want to do.
Do you have a MIDI patch bay such as kaconnect or the ALSA MIDI
patch bay ? If so you can look at a graphic representation of your
card's MIDI ports.
Whats the correlation between the /dev/snd/midi*
devices and
the alsa/Emu10k1 wavetable ports?
See below...
//-------------------------------------------------------------------
<wise@krsanky0~/sound_prg/midio> aconnect -o
client 64: 'Rawmidi 0 - EMU10K1 MPU-401 (UART)' [type=kernel]
0 'EMU10K1 MPU-401 (UART)'
client 65: 'Emu10k1 WaveTable' [type=kernel]
0 'Emu10k1 Port 0 '
1 'Emu10k1 Port 1 '
2 'Emu10k1 Port 2 '
3 'Emu10k1 Port 3 '
//-------------------------------------------------------------------
<wise@krsanky130~/sound_prg/midio> pmidi -l
Port Client name Port name
64:0 Rawmidi 0 - EMU10K1 MPU-401 (U EMU10K1 MPU-401 (UART)
65:0 Emu10k1 WaveTable Emu10k1 Port 0
65:1 Emu10k1 WaveTable Emu10k1 Port 1
65:2 Emu10k1 WaveTable Emu10k1 Port 2
65:3 Emu10k1 WaveTable Emu10k1 Port 3
This command will connect the input device at your hardware MIDI port to
the EMU10k1 synth:
aconnect 64:0 65:0
Try to see if it works on your system, then let me know.
Your question is really better suited for the Linux audio users group,
but feel free to email me directly. I also have the SBLive and can
hopefully help you through the trouble.
Best regards,
== Dave Phillips
The Book Of Linux Music & Sound at http://www.nostarch.com/lms.htm
The Linux Soundapps Site at http://linux-sound.org