[linux-audio-dev] problems with Midisport 2x2

Hi all, I've got a small problem with my Midisport 2x2 MIDI interface. While it worked ok before, now for some odd reason I cannot get it to open for MIDI output (from the computer). I've checked the /var/log/messages and this is what I got: Feb 24 20:44:41 mycomp kernel: hub.c: USB new device connect on bus2/1, assigned device number 2 Feb 24 20:44:41 mycomp kernel: usb.c: USB device 2 (vend/prod 0x763/0x1001) is not claimed by any active driver. Feb 24 20:44:44 mycomp /etc/hotplug/usb.agent: Setup ezusbmidi for USB product 763/1001/1 Feb 24 20:44:44 mycomp /etc/hotplug/usb.agent: Module setup ezusbmidi for USB product 763/1001/1 Feb 24 20:44:44 mycomp /etc/hotplug/usb/ezusbmidi: load /usr/share/usb/ezusbmidi/ezusbmidi2x2.ihx for 763/1001/1 to /proc/bus/usb/002/002 Feb 24 20:44:44 mycomp kernel: usb-uhci.c: interrupt, status 2, frame# 1645 Feb 24 20:44:44 mycomp kernel: usb.c: USB disconnect on device 2 Feb 24 20:44:44 mycomp kernel: hub.c: USB new device connect on bus2/1, assigned device number 3 Feb 24 20:44:44 mycomp kernel: usb.c: USB device 3 (vend/prod 0x763/0x1110) is not claimed by any active driver. Feb 24 20:44:48 mycomp /etc/hotplug/usb.agent: Setup snd-usb-audio audio usb usb-midi for USB product 763/1110/1 Feb 24 20:44:48 mycomp kernel: usb.c: registered new driver snd-usb-audio Feb 24 20:44:48 mycomp kernel: snd-usb-midi: MIDIStreaming version 01.00 Feb 24 20:44:48 mycomp kernel: snd-usb-midi: EP 01: 2 jack(s) Feb 24 20:44:48 mycomp kernel: snd-usb-midi: EP 81: 2 jack(s) Feb 24 20:44:48 mycomp kernel: snd-usb-midi: created 0 output and 4 input ports Feb 24 20:44:48 mycomp kernel: usb-uhci.c: ENXIO c0008380, flags 0, urb cdc59d60, burb cdc59ce0 Feb 24 20:44:48 mycomp kernel: snd-usb-midi: usb_submit_urb: -6 Feb 24 20:44:48 mycomp /etc/hotplug/usb.agent: ... blacklisted module: audio Feb 24 20:44:48 mycomp kernel: usb.c: registered new driver midi Feb 24 20:44:48 mycomp /etc/hotplug/usb.agent: ... blacklisted module: usb-midi It says that the device was opened with 4 input and 0 output ports. Why is this the case? I have no problem getting the midi input going, but my output is mysteriously dead. I've read somewhere that if the device is reconnected that the output stops working (might have been CCRMA's Fernando), but this is the log from the initial connect as soon as the computer boots. I've also made sure that no MIDI devices were connected to the MIDISPORT upon starting up. Any help on this issue is greatly appreciated! Sincerely, Ico