Re: [linux-audio-dev] HDSP 9652 Users - Request for info

have you tried doing it manually? modprobe -v snd-hammerfall-mem modprobe -v snd-hdsp what happens? Make sure you load the snd-hammerfall-mem modules before any other module. also you will have to set the output levels on the channels. If you run the command "amixer contents" you should see something like numid=11,iface=MIXER,name='Chn',index=1 ; type=INTEGER,access=rw---,values=1,min=0,max=65536,step=1 : values=0 one for each of the 26 channels, index=(1-25). You can set the volume with the following script #!/bin/bash for i in $(seq 1 26);do amixer -c 0 sset 'Chn',$i 85% done if all this goes well you should be ready to go. If you dont get any output, but everything works ok, try setting up the card, then do a warm reboot (ctl-alt-delete) and set it up again. On Tue, 2002-12-10 at 12:18, Mark Knecht wrote: -- drh(a)niptron.com Did you know that if you took all the economists in the world and lined them up end to end, they'd still point in the wrong direction?