21 Apr
2010
21 Apr
'10
8:31 a.m.
On 04/21/2010 05:49 PM, Louigi Verona wrote:
Hey Patrick!
This is exactly what I am trying to say - I had that buzz BEFORE you
added delay function. If you take the original kluppe - it has the
buzz too - if you route the signal straight from an individual loop
audio outs.
So if buzz is in individual loop audio outs - how come does it not
appear from the main out?
To be specific we can hear the buzz in the following situations.
1: Manual pause on channel output
2: Delayed playback pause on channel output
3: Delayed playback pause on main output
We do not hear the buzz with manual pause on main output.
If anyone has an idea on why that may be possible I would appreciate
your insight.
The updated source for kluppe with playback delay in place is at this
address:
http://djcj.org/code/kluppe-0.6.14-playbackdelay.tar.bz2
To enable the delay you need to change the bottom right spinbox in the
spinbox grid panel for a specific loop.
Cheers.
Patrick Shirkey
Boost Hardware Ltd
On Wed, Apr 21, 2010 at 10:12 AM, Patrick Shirkey
<pshirkey(a)boosthardware.com <mailto:pshirkey@boosthardware.com>> wrote:
On 04/21/2010 03:44 PM, Louigi Verona wrote:
You mean even from main out?
Just to be sure I have explained well - if I route (in patchage
for instance) the signal from "main out", then I get no buzz
during pause. If I route from an individual loop out, then I do
get the buzz.
Yeah, I don't get any buzz when pausing playback normally. Only
while the delayed pause is in action.
Patrick Shirkey
Boost Hardware Ltd