20 Aug
2009
20 Aug
'09
6:32 p.m.
On Thu, 20 Aug 2009, Raymond Martin wrote:
Which post would that be?
Hmmm... the one on LAU... sorry... see below.
===================================================================
I can't get that functionality currently. I tried changing the setting
all different ways and it only sounds like it is cutting or boosting
frequencies. The sweeping does not seem to be happening. Your docs also
indicate that the pedal is needed for this. What gives?
I had trouble with this, too. See my other post for "good" settings. From gabriel(a)teuton.org Thu Aug 20 08:46:20 2009
Date: Thu, 20 Aug 2009 08:46:00 -0500 (CDT)
From: Gabriel M. Beddingfield <gabriel(a)teuton.org>
To: Fons Adriaensen <fons(a)kokkinizita.net>
Cc: linux-audio-user(a)lists.linuxaudio.org
Subject: Re: [LAU] Auto-wah plugin
Hi All,
On Wed, 19 Aug 2009, Fons Adriaensen wrote:
The plugin could do both at a time, the 'foot' control would then
shift the fequency range.
Nice Wah! Thanks for the plugin! I played with this plugin last night
and thought I would share the settings I liked best.
Rig: Elect. Guit. w/humbuckers. I think I used the
neck pickup.
PodXT Live with AC-30 amp and Tube Screamer
JACK Rack controlled by FCB-1010
Strong signal to audio card
Tone: Santana-like
Manual Wah Settings:
Drive: -20
Decay: 0
Range: 0
Freq.: Set the expression pedal so that it sweeps
between .4 (heel) and .75 (toe)
Mix: 1.0
Auto-Wah Settings:
Drive: Between -20 and -12
Decay: Between 0 and about .13
Range: Between 0 and .5
Freq.: 0.4
Mix: 1.0
Hope this helps,
Gabriel