23 Mar
2005
23 Mar
'05
1:05 p.m.
On Wed, Mar 23, 2005 at 10:01:44AM +0100, Pieter Palmers wrote:
Jordan wrote:
Regarding this topic and the previous topic on jack.udp sync: We at the
freebob project had the idea of implementing a feature into our backend
that would allow a PC to be used as a 'FreeBob' device. (FreeBob is a
driver project for certain firewire based audio interfaces)
Using firewire as a transport layer for audio can solve some problems,
mainly those of sync and QoS. The scenario I had in mind was something
like you describe above, but using FW for the audio transport between
machines.
what are the physical medium requirements and cable length limitations
of firewire?
--
Eric Dantan Rzewnicki | Systems Administrator
Technical Operations Division | Radio Free Asia
2025 M Street, NW | Washington, DC 20036 | 202-530-4900
CONFIDENTIAL COMMUNICATION
This e-mail message is intended only for the use of the addressee and
may contain information that is privileged and confidential. Any
unauthorized dissemination, distribution, or copying is strictly
prohibited. If you receive this transmission in error, please contact
network(a)rfa.org.