27 Feb
2013
27 Feb
'13
10:15 p.m.
Ignorant here. Trying to scrounge around and make something work for a demo
purpose.
In python I am trying to build this pipeline:
pipeline_txt = (
'jackaudiosrc ! '
'level name=level interval=1000000000 !'
'jackaudiosink')
pipeline = gst.parse_launch(pipeline_txt)
I have been trying that a number of ways.
So, I basically watch the bus for level info.
In a subroutine, I can print the peak info to the terminal.
I can't seem to figure out how to pass this info back to the rest of the
program so that I can hook it up to a graphical meter.
Cna anyone point me to some simple code doing something like this? Give me
some clues that might help someone who seems to be being very dense for days
now?
all the best,
drew
28 Feb
28 Feb
12:51 a.m.
On Thu, February 28, 2013 8:14 am, drew Roberts wrote:
Ignorant here. Trying to scrounge around and make
something work for a
demo
purpose.
In python I am trying to build this pipeline:
pipeline_txt = (
'jackaudiosrc ! '
'level name=level interval=1000000000 !'
'jackaudiosink')
pipeline = gst.parse_launch(pipeline_txt)
I have been trying that a number of ways.
So, I basically watch the bus for level info.
In a subroutine, I can print the peak info to the terminal.
I can't seem to figure out how to pass this info back to the rest of the
program so that I can hook it up to a graphical meter.
Add a call to the callback for the meter to set the meter value from the
subroutine?
Cna anyone point me to some simple code doing
something like this? Give me
some clues that might help someone who seems to be being very dense for
days
now?
Sounds like you just need to connect the meter to the subroutine but it's
a bit had to say without a bit more code to demonstrate how you are
setting up the meter.
A few questions...
Is the meter a class of it's own or just a widget in a draw routine?
Do you have a "set_meter_value" type of function or are you just calling
directly to the meter widget's value?
What UI toolkit is the meter using?
--
Patrick Shirkey
Boost Hardware Ltd
3:37 a.m.
On Wednesday 27 February 2013 18:51:34 Patrick Shirkey wrote:
On Thu, February 28, 2013 8:14 am, drew Roberts
wrote:
Right now, I have not even tried to make a meter, I just want to get the peak
value out of the subroutine and print it from outside. I can print it from
the inside but can't even figure out how to get it out.
One sample I started working with (there are others but this is one) can be
found here:
http://stackoverflow.com/questions/9344888/getting-max-amplitude-for-an-aud…
In the def show_peak(bus, message):
there is:
peaks.append(message.structure['peak'][0])
but this is more of a "batch" type setup rather than an interactive one.
So let's say I do something like this instead:
#peaks.append(message.structure['peak'][0])
zpeak = message.structure['peak'][0]
#print "message.structure: "
print zpeak
return zpeak
along with making a jack source and sink instead of a file source and fake
sink.
I can get the peaks printed in there via the print zpeak.
But I am going around in circles (actually, circles is too clean a shape) in
my head trying to figure out how to get that info out as it comes in.
Once I ge that, then I have to figure out how to hook it up to a meter widget.
One possibility I have looked at basing this on is this:
http://zetcode.com/gui/pygtk/customwidget/
Ignorant here. Trying to scrounge around and make
something work for a
demo
purpose.
In python I am trying to build this pipeline:
pipeline_txt = (
'jackaudiosrc ! '
'level name=level interval=1000000000 !'
'jackaudiosink')
pipeline = gst.parse_launch(pipeline_txt)
I have been trying that a number of ways.
So, I basically watch the bus for level info.
In a subroutine, I can print the peak info to the terminal.
I can't seem to figure out how to pass this info back to the rest of the
program so that I can hook it up to a graphical meter.
Add a call to the callback for the meter to set the meter value from the
subroutine?
Cna anyone point me to some simple code doing
something like this? Give
me some clues that might help someone who seems to be being very dense
for days
now?
Sounds like you just need to connect the meter to the subroutine but it's
a bit had to say without a bit more code to demonstrate how you are
setting up the meter.
A few questions...
Is the meter a class of it's own or just a widget in a draw routine?
Do you have a "set_meter_value" type of function or are you just calling
directly to the meter widget's value?
What UI toolkit is the meter using?
--
Patrick Shirkey
Boost Hardware Ltd
all the best,
drew
4:09 a.m.
On Thu, February 28, 2013 1:37 pm, drew Roberts wrote:
On Wednesday 27 February 2013 18:51:34 Patrick Shirkey
wrote:
A custom gtk/cairo widget is pretty easy to update. You have a draw method
in the widget class and call widget_queue_redraw(widget) when you want to
refresh the widget.
You can set the widget's data before the call to widget_queue_redraw()
With the peak data you can use a timer or loop to update a callback that
sets the meter widget's data then calls the redraw command.
--
Patrick Shirkey
Boost Hardware Ltd
On Thu, February 28, 2013 8:14 am, drew Roberts
wrote:
Right now, I have not even tried to make a meter, I just want to get the
peak
value out of the subroutine and print it from outside. I can print it from
the inside but can't even figure out how to get it out.
One sample I started working with (there are others but this is one) can
be
found here:
http://stackoverflow.com/questions/9344888/getting-max-amplitude-for-an-aud…
In the def show_peak(bus, message):
there is:
peaks.append(message.structure['peak'][0])
but this is more of a "batch" type setup rather than an interactive one.
So let's say I do something like this instead:
#peaks.append(message.structure['peak'][0])
zpeak = message.structure['peak'][0]
#print "message.structure: "
print zpeak
return zpeak
along with making a jack source and sink instead of a file source and fake
sink.
I can get the peaks printed in there via the print zpeak.
But I am going around in circles (actually, circles is too clean a shape)
in
my head trying to figure out how to get that info out as it comes in.
Once I ge that, then I have to figure out how to hook it up to a meter
widget.
One possibility I have looked at basing this on is this:
http://zetcode.com/gui/pygtk/customwidget/
Ignorant here. Trying to scrounge around and make
something work for a
demo
purpose.
In python I am trying to build this pipeline:
pipeline_txt = (
'jackaudiosrc ! '
'level name=level interval=1000000000 !'
'jackaudiosink')
pipeline = gst.parse_launch(pipeline_txt)
I have been trying that a number of ways.
So, I basically watch the bus for level info.
In a subroutine, I can print the peak info to the terminal.
I can't seem to figure out how to pass this info back to the rest of
the
program so that I can hook it up to a graphical
meter.
Add a call to the callback for the meter to set the meter value from the
subroutine?
Cna anyone point me to some simple code doing
something like this?
Give
me some clues that might help someone who seems
to be being very dense
for days
now?
Sounds like you just need to connect the meter to the subroutine but
it's
a bit had to say without a bit more code to demonstrate how you are
setting up the meter.
A few questions...
Is the meter a class of it's own or just a widget in a draw routine?
Do you have a "set_meter_value" type of function or are you just calling
directly to the meter widget's value?
What UI toolkit is the meter using?
4082
days inactive
4083
days old
linux-audio-dev@lists.linuxaudio.org
3 comments
2 participants
participants (2)
-
drew Roberts -
Patrick Shirkey