13 Sep
2010
13 Sep
'10
11:26 p.m.
Pardon, I didn't follow the progress of envy24control. Did you finish
the recently development and if so, where can we/I get the latest source
code?
Cheers!
Ralf
14 Sep
14 Sep
2:36 a.m.
On Mon, Sep 13, 2010 at 2:25 PM, Ralf Mardorf <ralf.mardorf(a)alice-dsl.net>
wrote:
Pardon, I didn't follow the progress of
envy24control. Did you finish
the recently development and if so, where can we/I get the latest source
code?
http:// mudita24.googlecode.com
Status: still at 1.03. Waiting for Tim E. Real to commit and then will
release 1.04. Or use Tim's current patches (see link above).
Niels
http://nielsmayer.com
14 Dec
14 Dec
12:48 p.m.
Hi Niels,
On Mon, 13 Sep 2010 17:36:11 -0700
Niels Mayer <nielsmayer(a)gmail.com> wrote:
On Mon, Sep 13, 2010 at 2:25 PM, Ralf Mardorf
<ralf.mardorf(a)alice-dsl.net> wrote:
...quick question on the "Monitor PCMs" tab: Why are there 2 sliders
per PCM out? Shouldn't L/R Gang join channels 1 & 2, 3 & 4 etc...
thanks for any insight...
David
Pardon, I didn't follow the progress of
envy24control. Did you finish
the recently development and if so, where can we/I get the latest
source code?
http:// mudita24.googlecode.com
Status: still at 1.03. Waiting for Tim E. Real to commit and then will
release 1.04. Or use Tim's current patches (see link above).
Niels
http://nielsmayer.com
1:36 p.m.
On Tue, 2010-12-14 at 06:47 -0500, David Santamauro wrote:
Hi Niels,
On Mon, 13 Sep 2010 17:36:11 -0700
Niels Mayer <nielsmayer(a)gmail.com> wrote:
I never use the monitor section. Could it be that it's to root the PCMs
to the left or the right for the stereo sum, comparable to a mixing
console's left/right buttons for the subgroups? Hence L/R Gang will make
one PCM monitor mono for the stereo sum.
On Mon, Sep 13, 2010 at 2:25 PM, Ralf Mardorf
<ralf.mardorf(a)alice-dsl.net> wrote:
...quick question on the "Monitor PCMs" tab: Why are there 2 sliders
per PCM out? Shouldn't L/R Gang join channels 1 & 2, 3 & 4 etc...
thanks for any insight...
David Pardon, I didn't follow the progress of
envy24control. Did you finish
the recently development and if so, where can we/I get the latest
source code?
http:// mudita24.googlecode.com
Status: still at 1.03. Waiting for Tim E. Real to commit and then will
release 1.04. Or use Tim's current patches (see link above).
Niels
http://nielsmayer.com
1:41 p.m.
On Tue, 2010-12-14 at 13:36 +0100, Ralf Mardorf wrote:
On Tue, 2010-12-14 at 06:47 -0500, David Santamauro
wrote:
PS:
Note, there are no pan pots and you not necessarily will have PCM
monitor 1 to the left and 2 to the right, perhaps 1 should be mono and 2
2 to the left, while 3 is to the right position.
Just a shot in the dark.
Hi Niels,
On Mon, 13 Sep 2010 17:36:11 -0700
Niels Mayer <nielsmayer(a)gmail.com> wrote:
I never use the monitor section. Could it be that it's to root the PCMs
to the left or the right for the stereo sum, comparable to a mixing
console's left/right buttons for the subgroups? Hence L/R Gang will make
one PCM monitor mono for the stereo sum. On Mon, Sep 13, 2010 at 2:25 PM, Ralf Mardorf
<ralf.mardorf(a)alice-dsl.net> wrote:
...quick question on the "Monitor PCMs" tab: Why are there 2 sliders
per PCM out? Shouldn't L/R Gang join channels 1 & 2, 3 & 4 etc...
thanks for any insight...
David Pardon, I didn't follow the progress of
envy24control. Did you finish
the recently development and if so, where can we/I get the latest
source code?
http:// mudita24.googlecode.com
Status: still at 1.03. Waiting for Tim E. Real to commit and then will
release 1.04. Or use Tim's current patches (see link above).
Niels
http://nielsmayer.com
3:36 p.m.
On Tue, 14 Dec 2010 13:40:43 +0100
Ralf Mardorf <ralf.mardorf(a)alice-dsl.net> wrote:
On Tue, 2010-12-14 at 13:36 +0100, Ralf Mardorf wrote:
I think I understand: by looking at the windows mixer app in the delta
1010 documentation, I see that there is one fader, but in addition,
there is a pan slider per channel. I'm going to venture to guess that
having both sliders in envy24control full up, it is the equivalent of
the windows mixer app channel up and pan center -- this seems logical.
* single strips and pan pots/sliders would make this clearer.
David
On Tue, 2010-12-14 at 06:47 -0500, David
Santamauro wrote:
PS:
Note, there are no pan pots and you not necessarily will have PCM
monitor 1 to the left and 2 to the right, perhaps 1 should be mono
and 2 2 to the left, while 3 is to the right position.
Just a shot in the dark.
Hi Niels,
On Mon, 13 Sep 2010 17:36:11 -0700
Niels Mayer <nielsmayer(a)gmail.com> wrote:
I never use the monitor section. Could it be that it's to root the
PCMs to the left or the right for the stereo sum, comparable to a
mixing console's left/right buttons for the subgroups? Hence L/R
Gang will make one PCM monitor mono for the stereo sum. On Mon, Sep 13, 2010 at 2:25 PM, Ralf Mardorf
<ralf.mardorf(a)alice-dsl.net> wrote:
>Pardon, I didn't follow the progress of envy24control. Did you
>finish
> the recently development and if so, where can we/I get the
> latest source code?
http:// mudita24.googlecode.com
Status: still at 1.03. Waiting for Tim E. Real to commit and
then will release 1.04. Or use Tim's current patches (see link
above).
Niels
http://nielsmayer.com
...quick question on the "Monitor PCMs" tab: Why are there 2
sliders per PCM out? Shouldn't L/R Gang join channels 1 & 2, 3 &
4 etc...
thanks for any insight...
David
4:26 p.m.
On Tue, 2010-12-14 at 09:34 -0500, David Santamauro wrote:
On Tue, 14 Dec 2010 13:40:43 +0100
Ralf Mardorf <ralf.mardorf(a)alice-dsl.net> wrote:
Of course, but we should keep in mind, that we're talking about the
mixer for sound cards, but a mixing console or even a virtual mixing
console emulating a dj mixer or a professional mixing console. I never
used the monitor tab of the mixer for the sound card. I just use
envy24control and mudita24 to optimise the 'main' IOs of the card to my
analog mixing console, any mixing is done by apps and/or the analog
mixer, including monitoring.
Cheers!
Ralf
On Tue, 2010-12-14 at 13:36 +0100, Ralf Mardorf
wrote:
I think I understand: by looking at the windows mixer app in the delta
1010 documentation, I see that there is one fader, but in addition,
there is a pan slider per channel. I'm going to venture to guess that
having both sliders in envy24control full up, it is the equivalent of
the windows mixer app channel up and pan center -- this seems logical.
* single strips and pan pots/sliders would make this clearer.
David On Tue, 2010-12-14 at 06:47 -0500, David
Santamauro wrote:
PS:
Note, there are no pan pots and you not necessarily will have PCM
monitor 1 to the left and 2 to the right, perhaps 1 should be mono
and 2 2 to the left, while 3 is to the right position.
Just a shot in the dark.
Hi Niels,
On Mon, 13 Sep 2010 17:36:11 -0700
Niels Mayer <nielsmayer(a)gmail.com> wrote:
> On Mon, Sep 13, 2010 at 2:25 PM, Ralf Mardorf
> <ralf.mardorf(a)alice-dsl.net> wrote:
> >Pardon, I didn't follow the progress of envy24control. Did you
> >finish
> > the recently development and if so, where can we/I get the
> > latest source code?
>
> http:// mudita24.googlecode.com
>
> Status: still at 1.03. Waiting for Tim E. Real to commit and
> then will release 1.04. Or use Tim's current patches (see link
> above).
>
> Niels
> http://nielsmayer.com
...quick question on the "Monitor PCMs" tab: Why are there 2
sliders per PCM out? Shouldn't L/R Gang join channels 1 & 2, 3 &
4 etc...
thanks for any insight...
David
I never use the monitor section. Could it be that it's to root the
PCMs to the left or the right for the stereo sum, comparable to a
mixing console's left/right buttons for the subgroups? Hence L/R
Gang will make one PCM monitor mono for the stereo sum. 
15 Dec
15 Dec
6:24 p.m.
On Mon, 13 Sep 2010 17:36:11 -0700
Niels Mayer <nielsmayer(a)gmail.com> wrote:
On Mon, Sep 13, 2010 at 2:25 PM, Ralf Mardorf
<ralf.mardorf(a)alice-dsl.net> wrote:
Hi,
ICE1724 based sound cards share a lot of code in common with ICE1712
cards. Would it be possible to adapt envy24control in order to work
with those cards, or to make one envy24htcontrol ?
I am not a C/C++ developer myself, so I cannot contribute code for
this work, but I own an audiophile 192 and can help with testing.
Dominique
---
"We have the heroes we deserve."
Pardon, I didn't follow the progress of
envy24control. Did you
finish
the recently development and if so, where can we/I get the latest
source code?
http:// mudita24.googlecode.com
Status: still at 1.03. Waiting for Tim E. Real to commit and then
will release 1.04. Or use Tim's current patches (see link above).
Niels
http://nielsmayer.com
5323
days inactive
5416
days old
linux-audio-dev@lists.linuxaudio.org
7 comments
4 participants
participants (4)
-
David Santamauro -
Dominique Michel -
Niels Mayer -
Ralf Mardorf