29 May
2005
29 May
'05
2:56 a.m.
Hi all,
I have a soundblaster live.
I also am using debian/demudi and have a dual PIII 500 mhz.
I am looking for hints on how to optimize my card with alsa and jack
etc.
I once had found on the alsa site example of .asoundrc tailored for
the sblive but now on searching I don't see such an animal.
I want to use skype or a voice over ip in additon to audio processing.
I find that with my setup I get clicks where I can't hear the other
person.
I am doing some mixes where I need as much umph from my system as
possible and especially my sound card. I see that when I check my
irq's my sound card is:
theone:/home/aamehl# cat /proc/interrupts
CPU0 CPU1
0: 190504469 36529323 IO-APIC-edge timer 0/33792
2: 0 0 XT-PIC cascade 0/0
7: 0 0 IO-APIC-edge parport0 0/0
14: 852744 235050 IO-APIC-edge ide0 0/87773
15: 14 0 IO-APIC-edge ide1 1/12
145: 15477006 1925905 IO-APIC-level aic7xxx, aic7xxx, nvidia 0/2911
153: 15069558 1527074 IO-APIC-level EMU10K1 0/96632
161: 3021752 703622 IO-APIC-level uhci_hcd, eth0 0/25374
NMI: 0 0
LOC: 227042766 227042753
ERR: 0
MIS: 0
153 and most of the other devices are not addon cards but part of the
mother board. I can't move my video card and the ethernet is onboard.
Is all lost or can I give more priority to the sblive?
Any other suggestions are welcome as far as squezzing performance out
of my 128megs rams.
Thanks
Aaron
29 May
29 May
7:43 a.m.
On Sunday 29 May 2005 07:00, Aaron wrote:
Hi all,
I have a soundblaster live.
I also am using debian/demudi and have a dual PIII 500 mhz.
I am looking for hints on how to optimize my card with alsa and jack
etc.
Use: 48000 sample rate. Install a realtime kernel for audio usage, and the
clicks will vanish. Use jack for your audio recordings and alsa for normal
music playback (can be jack, too). For skype you have to use the oss
emulation modules, they don't support alsa yet.
Greets,
Joachim
Ps: Your ram problem can be solved by updating to 512 for example ;-)
I once had found on the alsa site example of .asoundrc
tailored for
the sblive but now on searching I don't see such an animal.
I want to use skype or a voice over ip in additon to audio processing.
I find that with my setup I get clicks where I can't hear the other
person.
I am doing some mixes where I need as much umph from my system as
possible and especially my sound card. I see that when I check my
irq's my sound card is:
theone:/home/aamehl# cat /proc/interrupts
CPU0 CPU1
0: 190504469 36529323 IO-APIC-edge timer 0/33792
2: 0 0 XT-PIC cascade 0/0
7: 0 0 IO-APIC-edge parport0 0/0
14: 852744 235050 IO-APIC-edge ide0 0/87773
15: 14 0 IO-APIC-edge ide1 1/12
145: 15477006 1925905 IO-APIC-level aic7xxx, aic7xxx, nvidia
0/2911 153: 15069558 1527074 IO-APIC-level EMU10K1 0/96632
161: 3021752 703622 IO-APIC-level uhci_hcd, eth0 0/25374
NMI: 0 0
LOC: 227042766 227042753
ERR: 0
MIS: 0
153 and most of the other devices are not addon cards but part of the
mother board. I can't move my video card and the ethernet is onboard.
Is all lost or can I give more priority to the sblive?
Any other suggestions are welcome as far as squezzing performance out
of my 128megs rams.
Thanks
Aaron
9:57 a.m.
On Sunday 29 May 2005 11:43, Joachim Schiele wrote:
On Sunday 29 May 2005 07:00, Aaron wrote:
Better make that 512MB, it will run much smoother than...
Arnold
--
There is a theory which states that if ever anyone discovers exactly what the
Universe is for and why it is here, it will instantly disappear and be
replaced by something even more bizarre and inexplicable.
There is another theory which states that this has already happened.
-- Douglas Adams, The Restaurant at the End of the Universe
I am looking for hints on how to optimize my card
with alsa and jack
etc.
Any other suggestions are welcome as far as squezzing performance out
of my 128megs rams.
Ps: Your ram problem can be solved by updating to 512 for
example ;-)
7177
days inactive
7177
days old
linux-audio-dev@lists.linuxaudio.org
2 comments
3 participants
participants (3)
-
Aaron -
Arnold Krille -
Joachim Schiele