11 Nov
2012
11 Nov
'12
12:09 p.m.
On 11.11.2012 12:00, Florian Paul Schmidt wrote:
On 11/11/2012 11:43 AM, Kjetil Matheussen wrote:
Thank you!
It seems like floorf crashes on your machine. (although I'm not
entirely sure the line number is correct since it was compiled with
-O3)
Which CPU do you have?
And why does this happen?
Radium is compiled with "-O3 -mtune=generic -msse"
Shouldn't that make it run on all CPUs that have sse instructions?
On 11.11.2012 11:38, Florian Paul Schmidt wrote:
Ah, here we go. I was just being stupid:
Illegal instruction (core dumped)
Does your cpu have sse instructions?
(Hmm, I guess all 64 bit cpus have that)
I'll download ubuntu lts and install it in virtualbox. I tried the
non-lts
version of ubuntu 12, and that worked, but lts seems to use an
older version of Qt, and perhaps have other differences as well.
fps@olive:~/local/opt/radium64_dist$ gdb bin/radium
bin/core
GNU gdb (Ubuntu/Linaro 7.4-2012.04-0ubuntu2) 7.4-2012.04
Copyright (C) 2012 Free Software Foundation, Inc.
License GPLv3+: GNU GPL version 3 or later
<http://gnu.org/licenses/gpl.html>
This is free software: you are free to change and redistribute it.
There is NO WARRANTY, to the extent permitted by law. Type "show
copying"
and "show warranty" for details.
This GDB was configured as "x86_64-linux-gnu".
For bug reporting instructions, please see:
<http://bugs.launchpad.net/gdb-linaro/>...
Reading symbols from
/home/fps/local/opt/radium64_dist/bin/radium...done.
[New LWP 13663]
[New LWP 13666]
[New LWP 13665]
[New LWP 13667]
warning: Can't read pathname for load map: Input/output error.
warning: Could not load shared library symbols for 43 libraries, e.g.
./libgio-2.0.so.
Use the "info sharedlibrary" command to see the complete listing.
Do you need "set solib-search-path" or "set sysroot"?
[Thread debugging using libthread_db enabled]
Using host libthread_db library
"/lib/x86_64-linux-gnu/libthread_db.so.1".
Core was generated by `./radium'.
Program terminated with signal 4, Illegal instruction.
#0 floorf (__x=<optimized out>) at
/usr/include/bits/mathinline.h:228
228 /usr/include/bits/mathinline.h: No such file or directory.
(gdb) bt
#0 floorf (__x=<optimized out>) at
/usr/include/bits/mathinline.h:228
#1 Zita_dsp::instanceInit (this=0x7f8012d6c010, samplingFreq=48000,
samplingFreq@entry=<error reading variable: Could not find type
for DW_OP_GNU_const_type>) at audio/zita_rev.cpp:292
#2 0x00000000004b007e in init (samplingFreq=<error reading variable:
Could not find type for DW_OP_GNU_const_type>,
this=<optimized out>) at audio/zita_rev.cpp:393
#3 create_effect_plugin_data
(plugin_type=plugin_type@entry=0x863ea0, plugin=plugin@entry=0x0,
samplerate=48000,
blocksize=blocksize@entry=1024) at audio/zita_rev.cpp:1073
#4 0x00000000004b2ac0 in create_zita_rev_plugin () at
audio/zita_rev.cpp:1239
#5 0x0000000000563263 in PR_init_plugin_types () at
audio/SoundPluginRegistry.cpp:267
#6 0x0000000000568649 in MIXER_start () at audio/Mixer.cpp:472
#7 0x000000000042de7d in InitProgram () at common/control.c:97
#8 0x000000000045cd18 in radium_main (arg=arg@entry=0x7f803e60c52c
"") at Qt/Qt_Main.cpp:389
#9 0x000000000049e86f in init_radium (arg=0x7f803e60c52c "",
gkf=0x7f803e546aa0) at api/api_common.c:61
#10 0x000000000049e3cf in _wrap_init_radium (self=<optimized out>,
args=<optimized out>) at api/radium_wrap.c:572
#11 0x00000035a5edd0e1 in ?? ()
#12 0x00007f8000000000 in ?? ()
#13 0x0000000000000000 in ?? ()
(gdb) thread apply all bt
Thread 4 (Thread 0x7f8032509700 (LWP 13667)):
#0 sem_timedwait () at
../nptl/sysdeps/unix/sysv/linux/x86_64/sem_timedwait.S:102
#1 0x00007f803dd4ebd2 in ?? () from
/usr/lib/x86_64-linux-gnu/libjack.so.0
#2 0x00007f803dd3d6c9 in ?? () from
/usr/lib/x86_64-linux-gnu/libjack.so.0
#3 0x00007f803dd3c217 in ?? () from
/usr/lib/x86_64-linux-gnu/libjack.so.0
#4 0x0000000000568ce6 in Mixer::RT_thread (this=0x12a68d0) at
audio/Mixer.cpp:385
#5 0x0000000000568dd9 in Mixer::RT_rjack_thread (arg=<optimized
out>) at audio/Mixer.cpp:424
#6 0x00007f803dd3ac47 in ?? () from
/usr/lib/x86_64-linux-gnu/libjack.so.0
#7 0x00007f803dd4e1b0 in ?? () from
/usr/lib/x86_64-linux-gnu/libjack.so.0
#8 0x00007f803e261e9a in start_thread (arg=0x7f8032509700) at
pthread_create.c:308
#9 0x00007f803cf25cbd in clone () at
../sysdeps/unix/sysv/linux/x86_64/clone.S:112
#10 0x0000000000000000 in ?? ()
Thread 3 (Thread 0x7f8032621700 (LWP 13665)):
#0 pthread_cond_wait@@GLIBC_2.3.2 () at
../nptl/sysdeps/unix/sysv/linux/x86_64/pthread_cond_wait.S:162
#1 0x00007f803dd4f804 in ?? () from
/usr/lib/x86_64-linux-gnu/libjack.so.0
#2 0x00007f803dd4adb1 in ?? () from
/usr/lib/x86_64-linux-gnu/libjack.so.0
#3 0x00007f803dd4e1b0 in ?? () from
/usr/lib/x86_64-linux-gnu/libjack.so.0
#4 0x00007f803e261e9a in start_thread (arg=0x7f8032621700) at
pthread_create.c:308
#5 0x00007f803cf25cbd in clone () at
../sysdeps/unix/sysv/linux/x86_64/clone.S:112
#6 0x0000000000000000 in ?? ()
Thread 2 (Thread 0x7f80325a0700 (LWP 13666)):
#0 0x00007f803e268d2d in read () at
../sysdeps/unix/syscall-template.S:82
#1 0x00007f803dd4ffba in ?? () from
/usr/lib/x86_64-linux-gnu/libjack.so.0
#2 0x00007f803dd52966 in ?? () from
/usr/lib/x86_64-linux-gnu/libjack.so.0
#3 0x00007f803dd4e1b0 in ?? () from
/usr/lib/x86_64-linux-gnu/libjack.so.0
#4 0x00007f803e261e9a in start_thread (arg=0x7f80325a0700) at
pthread_create.c:308
#5 0x00007f803cf25cbd in clone () at
../sysdeps/unix/sysv/linux/x86_64/clone.S:112
#6 0x0000000000000000 in ?? ()
Thread 1 (Thread 0x7f803e648840 (LWP 13663)):
#0 floorf (__x=<optimized out>) at
/usr/include/bits/mathinline.h:228
#1 Zita_dsp::instanceInit (this=0x7f8012d6c010, samplingFreq=48000,
samplingFreq@entry=<error reading variable: Could not find type
for DW_OP_GNU_const_type>) at audio/zita_rev.cpp:292
#2 0x00000000004b007e in init (samplingFreq=<error reading variable:
Could not find type for DW_OP_GNU_const_type>,
this=<optimized out>) at audio/zita_rev.cpp:393
#3 create_effect_plugin_data
(plugin_type=plugin_type@entry=0x863ea0, plugin=plugin@entry=0x0,
samplerate=48000,
blocksize=blocksize@entry=1024) at audio/zita_rev.cpp:1073
#4 0x00000000004b2ac0 in create_zita_rev_plugin () at
audio/zita_rev.cpp:1239
#5 0x0000000000563263 in PR_init_plugin_types () at
audio/SoundPluginRegistry.cpp:267
#6 0x0000000000568649 in MIXER_start () at audio/Mixer.cpp:472
#7 0x000000000042de7d in InitProgram () at common/control.c:97
#8 0x000000000045cd18 in radium_main (arg=arg@entry=0x7f803e60c52c
"") at Qt/Qt_Main.cpp:389
#9 0x000000000049e86f in init_radium (arg=0x7f803e60c52c "",
gkf=0x7f803e546aa0) at api/api_common.c:61
#10 0x000000000049e3cf in _wrap_init_radium (self=<optimized out>,
args=<optimized out>) at api/radium_wrap.c:572
#11 0x00000035a5edd0e1 in ?? ()
#12 0x00007f8000000000 in ?? ()
#13 0x0000000000000000 in ?? ()
(gdb)
11 Nov
11 Nov
12:23 p.m.
New subject: [ANN] Radium V1.9.1
On 11/11/2012 12:09 PM, Kjetil Matheussen wrote:
On 11.11.2012 12:00, Florian Paul Schmidt wrote:
Find /proc/cpuinfo below. Sadly I don't know the reason for this crash..
Maybe Fons knows something as it's in the Zita-Code?
Flo
fps@olive:~/local/opt/radium64_dist$ cat /proc/cpuinfo
processor : 0
vendor_id : AuthenticAMD
cpu family : 16
model : 10
model name : AMD Phenom(tm) II X4 960T Processor
stepping : 0
microcode : 0x10000bf
cpu MHz : 800.000
cache size : 512 KB
physical id : 0
siblings : 4
core id : 0
cpu cores : 4
apicid : 0
initial apicid : 0
fpu : yes
fpu_exception : yes
cpuid level : 6
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge
mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext
fxsr_opt pdpe1gb rdtscp lm 3dnowext 3dnow constant_tsc rep_good nopl
nonstop_tsc extd_apicid aperfmperf pni monitor cx16 popcnt lahf_lm
cmp_legacy svm extapic cr8_legacy abm sse4a misalignsse 3dnowprefetch
osvw ibs skinit wdt nodeid_msr cpb npt lbrv svm_lock nrip_save pausefilter
bogomips : 6026.08
TLB size : 1024 4K pages
clflush size : 64
cache_alignment : 64
address sizes : 48 bits physical, 48 bits virtual
power management: ts ttp tm stc 100mhzsteps hwpstate cpb
processor : 1
vendor_id : AuthenticAMD
cpu family : 16
model : 10
model name : AMD Phenom(tm) II X4 960T Processor
stepping : 0
microcode : 0x10000bf
cpu MHz : 800.000
cache size : 512 KB
physical id : 0
siblings : 4
core id : 1
cpu cores : 4
apicid : 1
initial apicid : 1
fpu : yes
fpu_exception : yes
cpuid level : 6
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge
mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext
fxsr_opt pdpe1gb rdtscp lm 3dnowext 3dnow constant_tsc rep_good nopl
nonstop_tsc extd_apicid aperfmperf pni monitor cx16 popcnt lahf_lm
cmp_legacy svm extapic cr8_legacy abm sse4a misalignsse 3dnowprefetch
osvw ibs skinit wdt nodeid_msr cpb npt lbrv svm_lock nrip_save pausefilter
bogomips : 6026.53
TLB size : 1024 4K pages
clflush size : 64
cache_alignment : 64
address sizes : 48 bits physical, 48 bits virtual
power management: ts ttp tm stc 100mhzsteps hwpstate cpb
processor : 2
vendor_id : AuthenticAMD
cpu family : 16
model : 10
model name : AMD Phenom(tm) II X4 960T Processor
stepping : 0
microcode : 0x10000bf
cpu MHz : 800.000
cache size : 512 KB
physical id : 0
siblings : 4
core id : 2
cpu cores : 4
apicid : 2
initial apicid : 2
fpu : yes
fpu_exception : yes
cpuid level : 6
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge
mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext
fxsr_opt pdpe1gb rdtscp lm 3dnowext 3dnow constant_tsc rep_good nopl
nonstop_tsc extd_apicid aperfmperf pni monitor cx16 popcnt lahf_lm
cmp_legacy svm extapic cr8_legacy abm sse4a misalignsse 3dnowprefetch
osvw ibs skinit wdt nodeid_msr cpb npt lbrv svm_lock nrip_save pausefilter
bogomips : 6026.53
TLB size : 1024 4K pages
clflush size : 64
cache_alignment : 64
address sizes : 48 bits physical, 48 bits virtual
power management: ts ttp tm stc 100mhzsteps hwpstate cpb
processor : 3
vendor_id : AuthenticAMD
cpu family : 16
model : 10
model name : AMD Phenom(tm) II X4 960T Processor
stepping : 0
microcode : 0x10000bf
cpu MHz : 800.000
cache size : 512 KB
physical id : 0
siblings : 4
core id : 3
cpu cores : 4
apicid : 3
initial apicid : 3
fpu : yes
fpu_exception : yes
cpuid level : 6
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge
mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext
fxsr_opt pdpe1gb rdtscp lm 3dnowext 3dnow constant_tsc rep_good nopl
nonstop_tsc extd_apicid aperfmperf pni monitor cx16 popcnt lahf_lm
cmp_legacy svm extapic cr8_legacy abm sse4a misalignsse 3dnowprefetch
osvw ibs skinit wdt nodeid_msr cpb npt lbrv svm_lock nrip_save pausefilter
bogomips : 6026.53
TLB size : 1024 4K pages
clflush size : 64
cache_alignment : 64
address sizes : 48 bits physical, 48 bits virtual
power management: ts ttp tm stc 100mhzsteps hwpstate cpb
On 11/11/2012 11:43 AM, Kjetil Matheussen wrote:
Thank you!
It seems like floorf crashes on your machine. (although I'm not
entirely sure the line number is correct since it was compiled with -O3)
Which CPU do you have?
And why does this happen?
Radium is compiled with "-O3 -mtune=generic -msse"
Shouldn't that make it run on all CPUs that have sse instructions?
On 11.11.2012 11:38, Florian Paul Schmidt wrote:
Ah, here we go. I was just being stupid:
Illegal instruction (core dumped)
Does your cpu have sse instructions?
(Hmm, I guess all 64 bit cpus have that)
I'll download ubuntu lts and install it in virtualbox. I tried the
non-lts
version of ubuntu 12, and that worked, but lts seems to use an
older version of Qt, and perhaps have other differences as well.
1:46 p.m.
New subject: [ANN] Radium V1.9.1
On Sun, Nov 11, 2012 at 12:24:08PM +0100, Florian Paul Schmidt wrote:
Find /proc/cpuinfo below. Sadly I don't know the
reason for this
crash.. Maybe Fons knows something as it's in the Zita-Code?
That code was generated by Faust. IIRC it is considerably less
efficient than the original C++ code, and it adds nothing new.
So I wonder why you don't use the original, in which case I
could provide support.
Ciao,
--
FA
A world of exhaustive, reliable metadata would be an utopia.
It's also a pipe-dream, founded on self-delusion, nerd hubris
and hysterically inflated market opportunities. (Cory Doctorow)
1:55 p.m.
New subject: [ANN] Radium V1.9.1
On 11/11/2012 01:46 PM, Fons Adriaensen wrote:
On Sun, Nov 11, 2012 at 12:24:08PM +0100, Florian Paul
Schmidt wrote:
When using the FAUST generated zita-rev plugin, there is the
possibility to automate parameters and to save/restore session state.
It's much easier to use that in DAW projects.
Find /proc/cpuinfo below. Sadly I don't know
the reason for this
crash.. Maybe Fons knows something as it's in the Zita-Code?
That code was generated by Faust. IIRC it is considerably less
efficient than the original C++ code, and it adds nothing new. So I wonder why you don't use the original, in
which case I
could provide support.
It'd be great if the more efficient upstream version could provide a LV2
or LADSPA wrapper for that reason.
ciao,
robin
3:01 p.m.
New subject: [ANN] Radium V1.9.1
On 11.11.2012 13:55, Robin Gareus wrote:
On 11/11/2012 01:46 PM, Fons Adriaensen wrote:
In general, that could be true, but Radium has its own systems for
automation
and saving/loading session states, so it doesn't make a difference
here.
On Sun, Nov 11, 2012 at 12:24:08PM +0100, Florian
Paul Schmidt
wrote:
When using the FAUST generated zita-rev plugin, there is the
possibility to automate parameters and to save/restore session state.
It's much easier to use that in DAW projects.
Find /proc/cpuinfo below. Sadly I don't know
the reason for this
crash.. Maybe Fons knows something as it's in the Zita-Code?
That code was generated by Faust. IIRC it is considerably less
efficient than the original C++ code, and it adds nothing new.
2:04 p.m.
New subject: [ANN] Radium V1.9.1
On 11.11.2012 13:46, Fons Adriaensen wrote:
On Sun, Nov 11, 2012 at 12:24:08PM +0100, Florian Paul
Schmidt wrote:
> Find /proc/cpuinfo below. Sadly I don't know the reason for this
> crash..
I don't know either. -mtune=generic -msse should produce legal code
for your processor...
> Maybe Fons knows something as it's in the
Zita-Code?
Pretty sure the problem is that sse math crashes. It's just a
coincidence
that zita reverb was the first code to use sse math. Radium would crash
later for you anyway, even if zita reverb wasn't used.
That code was generated by Faust. IIRC it is considerably less
efficient than the original C++ code, and it adds nothing new.
So I wonder why you don't use the original, in which case I
could provide support.
Using the Faust version made it possible to port the zita reverb in
only a
few minutes, since I have a faust architecture file for Radium. In
addition,
I don't need the equalizer controls and the dry/wet controls (since
those
things are available on all sound objects in Radium), and removing
that code from your version (C++) is more work than removing the same
code from Faust code.
4183
days inactive
4183
days old
linux-audio-dev@lists.linuxaudio.org
5 comments
4 participants
participants (4)
-
Florian Paul Schmidt -
Fons Adriaensen -
Kjetil Matheussen -
Robin Gareus