31 Dec
2006
31 Dec
'06
6:57 a.m.
Le Sun, 31 Dec 2006 02:21:20 -0500,
Lee Revell <rlrevell(a)joe-job.com> a écrit :
On Sat, 2006-12-30 at 18:06 +0100, Dominique Michel
wrote:
Thank you Bill and Lee.
It is the last beta from portage in gentoo, that is 9.0.21.78 and it is the
last version (installer 112006).
After restarting not only alsa but the whole system and running flash on the
same website with just 2 open windows in firefox, the sound work much better.
The processor load was very high on the first test. And I am able to record
from audacity without any .asoundrc file.
Is it possible to run flash with jack? My wm is currently fvwm-crystal. I try
to run arts with konqueror and arts with jack as sound server. I can see arts in
the connection windows of qjackctl, the sound is here but already hoping with a
processor load of 17% and I don't have flash in qjackctl. So, is it possible to
run flash 9 with jack and firefox?
Cheers,
Dominique
The result was at the sound from flash 9
(some kind of worst case scenario) when listening to
http://concerts.wolfgangsvault.com/ConcertDetail.aspx?id=2229|3385 was
hopping all the time, when it's hopping without any .asoundrc only
when I open or close a windows or when I shift from a virual desktop
to another one.
Did you install the latest Flash 9 beta? Earlier versions did not work
well for me.
Lee
31 Dec
31 Dec
7:47 a.m.
Le Sun, 31 Dec 2006 11:52:22 +0100,
Dominique Michel <dominique.michel(a)citycable.ch> a écrit :
Le Sun, 31 Dec 2006 02:21:20 -0500,
Lee Revell <rlrevell(a)joe-job.com> a écrit :
I try with this in my .asoundrc:
pcm.!default {
type plug
slave { pcm "jack" }
}
pcm.jack {
type jack
playback_ports {
0 alsa_pcm:playback_1
1 alsa_pcm:playback_2
}
capture_ports {
0 alsa_pcm:capture_1
1 alsa_pcm:capture_2
}
}
But it doesn't work. I try it both with the jack-audigy configuration explained
in the alsa sources (16 in and out, 48 kHz) and with only 2 in-out, 44.1 kHz
and 1024 periods. The result was the same, flash start, i get a lot of output
ports for flash (16 or more...) in qjackctl, when I try to connect one of those
ports, I get "no ports available!". 30 seconds later or so, it is only 2 ports
left for flash and when I try to connect one, flash crash as well as firefox
and I get "unknown source port in attempted connection
[alsa-jack.jackP.12333.59:out_000]"
Cheers,
Dominique
On Sat, 2006-12-30 at 18:06 +0100, Dominique
Michel wrote:
Thank you Bill and Lee.
It is the last beta from portage in gentoo, that is 9.0.21.78 and it is the
last version (installer 112006).
After restarting not only alsa but the whole system and running flash on the
same website with just 2 open windows in firefox, the sound work much better.
The processor load was very high on the first test. And I am able to record
from audacity without any .asoundrc file.
Is it possible to run flash with jack? My wm is currently fvwm-crystal. I try
to run arts with konqueror and arts with jack as sound server. I can see arts
in the connection windows of qjackctl, the sound is here but already hoping
with a processor load of 17% and I don't have flash in qjackctl. So, is it
possible to run flash 9 with jack and firefox?
Cheers,
Dominique The result was at the sound from flash 9
(some kind of worst case scenario) when listening to
http://concerts.wolfgangsvault.com/ConcertDetail.aspx?id=2229|3385 was
hopping all the time, when it's hopping without any .asoundrc only
when I open or close a windows or when I shift from a virual desktop
to another one.
Did you install the latest Flash 9 beta? Earlier versions did not work
well for me.
Lee
6529
days inactive
6529
days old
linux-audio-dev@lists.linuxaudio.org
1 comments
1 participants
participants (1)
-
Dominique Michel