12 Aug
2008
12 Aug
'08
1:29 a.m.
I downloaded alsa-firmware and fxload from medibuntu, it loads the
firmware fine, the lights go on and alsa recognizes it. I get errors in
dmesg and jackd doesn't work.
shawn@ubuntu:~$ cat /proc/asound/cards
0 [Intel ]: HDA-Intel - HDA Intel
HDA Intel at 0xfebfc000 irq 19
1 [K88 ]: USB-Audio - Keystation Pro 88
Evolution Electronics Ltd. Keystation Pro 88 at usb-0000:00:1d.7-2.4,
full spee 2 [USX2Y ]: USB US-X2Y - TASCAM US-X2Y
TASCAM US-X2Y (1604:8007 if 0 at 007/006)
I get this in dmesg:
[ 95.442460]
ALSA
/build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-rt/sound/alsa-driver/usb/usx2y/usbusx2yaudio.c:313:
Sequence Error!(hcd_frame=345 ep=10out;wait=345,frame=342).
[ 95.442488] Most propably some urb of usb-frame 345 is still missing.
[ 95.442491] Cause could be too long delays in usb-hcd interrupt
handling. [ 95.479404]
ALSA
/build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-rt/sound/alsa-driver/usb/usx2y/usbusx2yaudio.c:313:
Sequence Error!(hcd_frame=382 ep=10out;wait=382,frame=379).
[ 95.479429] Most propably some urb of usb-frame 382 is still missing.
[ 95.479431] Cause could be too long delays in usb-hcd interrupt
handling. [ 96.012293]
ALSA
/build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-rt/sound/alsa-driver/usb/usx2y/usbusx2yaudio.c:313:
Sequence Error!(hcd_frame=5 ep=8in;wait=1026,frame=2). [ 96.012311]
Most propably some urb of usb-frame 1026 is still missing. [ 96.012314]
Cause could be too long delays in usb-hcd interrupt handling.
I get this with jackd:
23:01:43.405 JACK is starting...
23:01:43.406 /usr/bin/jackd -R -dalsa -dhw:2 -r96000 -p1024 -n3
23:01:43.434 JACK was started with PID=22944.
jackd 0.109.2
Copyright 2001-2005 Paul Davis and others.
jackd comes with ABSOLUTELY NO WARRANTY
This is free software, and you are welcome to redistribute it
under certain conditions; see the file COPYING for details
JACK compiled with System V SHM support.
cannot lock down memory for jackd (Cannot allocate memory)
loading driver ..
apparent rate = 96000
creating alsa driver ...
hw:2|hw:2|1024|3|96000|0|0|nomon|swmeter|-|32bit control device hw:2
configuring for 96000Hz, period = 1024 frames (10.7 ms), buffer = 3
periods ALSA: final selected sample format for capture: 24bit
little-endian ALSA: use 3 periods for capture
ALSA: final selected sample format for playback: 24bit little-endian
ALSA: use 3 periods for playback
ALSA: cannot set hardware parameters for playback
ALSA: cannot configure playback channel
cannot load driver module alsa
no message buffer overruns
23:01:44.454 JACK was stopped successfully.
23:01:44.455 Post-shutdown script...
23:01:44.455 killall jackd
jackd: no process killed
23:01:45.053 Post-shutdown script terminated with exit status=256.
23:01:46.681 Could not connect to JACK server as client. - Overall
operation failed. - Unable to connect to server. Please check the
messages window for more info.
Help please!
Miesco is online now Report Post Edit/Delete Message
12 Aug
12 Aug
8:22 a.m.
if you have another usb controller, try to use it, I remember that one
controller doesnt work well with my tascam.
by controller I mean uhci or ohci.
My tascam (428) work well under ubuntu with a rtkernel or a non rt one.
Maybe you use an rtkernel with threaded isr and bad priority for your usb
irq handler. That could delay your tascam usb frame too much.
try with a generic kernel at first if you get sound without jack. If it work
then you will need to tweak rt priority.
2008/8/12 Shawn Wallis <miesco251(a)gmail.com>
I downloaded alsa-firmware and fxload from medibuntu, it loads the
firmware fine, the lights go on and alsa recognizes it. I get errors in
dmesg and jackd doesn't work.
shawn@ubuntu:~$ cat /proc/asound/cards
0 [Intel ]: HDA-Intel - HDA Intel
HDA Intel at 0xfebfc000 irq 19
1 [K88 ]: USB-Audio - Keystation Pro 88
Evolution Electronics Ltd. Keystation Pro 88 at usb-0000:00:1d.7-2.4,
full spee 2 [USX2Y ]: USB US-X2Y - TASCAM US-X2Y
TASCAM US-X2Y (1604:8007 if 0 at 007/006)
I get this in dmesg:
[ 95.442460]
ALSA
/build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-rt/sound/alsa-driver/usb/usx2y/usbusx2yaudio.c:313:
Sequence Error!(hcd_frame=345 ep=10out;wait=345,frame=342).
[ 95.442488] Most propably some urb of usb-frame 345 is still missing.
[ 95.442491] Cause could be too long delays in usb-hcd interrupt
handling. [ 95.479404]
ALSA
/build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-rt/sound/alsa-driver/usb/usx2y/usbusx2yaudio.c:313:
Sequence Error!(hcd_frame=382 ep=10out;wait=382,frame=379).
[ 95.479429] Most propably some urb of usb-frame 382 is still missing.
[ 95.479431] Cause could be too long delays in usb-hcd interrupt
handling. [ 96.012293]
ALSA
/build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-rt/sound/alsa-driver/usb/usx2y/usbusx2yaudio.c:313:
Sequence Error!(hcd_frame=5 ep=8in;wait=1026,frame=2). [ 96.012311]
Most propably some urb of usb-frame 1026 is still missing. [ 96.012314]
Cause could be too long delays in usb-hcd interrupt handling.
I get this with jackd:
23:01:43.405 JACK is starting...
23:01:43.406 /usr/bin/jackd -R -dalsa -dhw:2 -r96000 -p1024 -n3
23:01:43.434 JACK was started with PID=22944.
jackd 0.109.2
Copyright 2001-2005 Paul Davis and others.
jackd comes with ABSOLUTELY NO WARRANTY
This is free software, and you are welcome to redistribute it
under certain conditions; see the file COPYING for details
JACK compiled with System V SHM support.
cannot lock down memory for jackd (Cannot allocate memory)
loading driver ..
apparent rate = 96000
creating alsa driver ...
hw:2|hw:2|1024|3|96000|0|0|nomon|swmeter|-|32bit control device hw:2
configuring for 96000Hz, period = 1024 frames (10.7 ms), buffer = 3
periods ALSA: final selected sample format for capture: 24bit
little-endian ALSA: use 3 periods for capture
ALSA: final selected sample format for playback: 24bit little-endian
ALSA: use 3 periods for playback
ALSA: cannot set hardware parameters for playback
ALSA: cannot configure playback channel
cannot load driver module alsa
no message buffer overruns
23:01:44.454 JACK was stopped successfully.
23:01:44.455 Post-shutdown script...
23:01:44.455 killall jackd
jackd: no process killed
23:01:45.053 Post-shutdown script terminated with exit status=256.
23:01:46.681 Could not connect to JACK server as client. - Overall
operation failed. - Unable to connect to server. Please check the
messages window for more info.
Help please!
Miesco is online now Report Post Edit/Delete Message
_______________________________________________
Linux-audio-dev mailing list
Linux-audio-dev(a)lists.linuxaudio.org
http://lists.linuxaudio.org/mailman/listinfo/linux-audio-dev
12:43 p.m.
Shawn Wallis wrote:
I downloaded alsa-firmware and fxload from medibuntu,
it loads the
firmware fine, the lights go on and alsa recognizes it. I get errors in
dmesg and jackd doesn't work.
I get this with jackd:
23:01:43.405 JACK is starting...
23:01:43.406 /usr/bin/jackd -R -dalsa -dhw:2 -r96000 -p1024 -n3
23:01:43.434 JACK was started with PID=22944.
jackd 0.109.2
Copyright 2001-2005 Paul Davis and others.
jackd comes with ABSOLUTELY NO WARRANTY
This is free software, and you are welcome to redistribute it
under certain conditions; see the file COPYING for details
JACK compiled with System V SHM support.
cannot lock down memory for jackd (Cannot allocate memory)
loading driver ..
apparent rate = 96000
creating alsa driver ...
hw:2|hw:2|1024|3|96000|0|0|nomon|swmeter|-|32bit control device hw:2
configuring for 96000Hz, period = 1024 frames (10.7 ms), buffer = 3
periods ALSA: final selected sample format for capture: 24bit
little-endian ALSA: use 3 periods for capture
ALSA: final selected sample format for playback: 24bit little-endian
ALSA: use 3 periods for playback
ALSA: cannot set hardware parameters for playback
ALSA: cannot configure playback channel
cannot load driver module alsa
please take note that there's no usb1.1 device in the universe that can
run on a 96000hz sample rate. try 44100 or 48000, nothing more, nothing
less.
byee
--
rncbc aka Rui Nuno Capela
rncbc(a)rncbc.org
1:51 p.m.
please take note that there's no usb1.1 device in
the universe that can
run on a 96000hz sample rate. try 44100 or 48000, nothing more, nothing
less.
To be precise, it is indeed possible, just not in duplex mode, IIANM.
I never tried it, but my Edirol UA25 USB 1.1 has a 96k setting with
the caveat that you can only do either capture or playback at a time.
L
5990
days inactive
5991
days old
linux-audio-dev@lists.linuxaudio.org
3 comments
4 participants
participants (4)
-
Cedric GESTES -
Luis Garrido -
Rui Nuno Capela -
Shawn Wallis