2 Jan
2004
2 Jan
'04
8:07 a.m.
Hi,
i just compiled qsynth-0.1.0 and i would lie to report on my findings:
On Debian, the qt-libs are installed to
/usr/lib/
and the headers to
/usr/include/qt3
There's no QTDIR per se. So i exported it to be /usr. This way, the
configure script finds the lib, but the following test fails:
checking whether QTDIR environment variable is set... /usr/
checking for Qt library... qt-mt
checking for Qt library version >= 3.1.1... no; Qt 3.1.1 or greater is
required
the entry from config.log:
----
configure:1167: c++ -o conftest -g -O2 -I/usr//include conftest.C
-L/usr//lib -L/usr/X11R6/lib 1>&5
configure:1157:21: qglobal.h: No such file or directory
configure:1161:2: #error Qt library 3.1.1 or greater required.
configure: failed program was:
#line 1156 "configure"
#include "confdefs.h"
#include "qglobal.h"
int main() {
#if QT_VERSION < 0x030101
#error Qt library 3.1.1 or greater required.
#endif
; return 0; }
----
Hmm, looking at the commandline to compile this, it cannot work, since
the include path is /usr/lib. so i changed this in the configure script:
#include "confdefs.h"
#include "qglobal.h"
to
#include "qt3/confdefs.h"
#include "qt3/qglobal.h"
Then i get an error again: cannot find confdefs.h. So i check my qt3
include dir and it is not there. so i removed the line from the qt3 test
program from configure. And now the test runs fine and the program
compiles nicely..
My suggestion: Add a --with-qt-inc-dir and a --with-qt-lib-dir switch to
the configure script, so "non standard" [though the qt way itself is non
standard] qt installations can be found, to.
I still wonder where that confdefs header file lives on my computer.
gonna start a find / now ;) Maybe there's a more grcefule way to handle
this configure problem. /me doesn't know it..
Flo
--
music: http://www.soundclick.com/bands/9/florianschmidt.htm
2 Jan
2 Jan
9:11 a.m.
On Fri, Jan 02, 2004 at 02:09:05PM +0100, Florian Schmidt wrote:
i just compiled qsynth-0.1.0 and i would lie to report
on my findings:
There's no QTDIR per se. So i exported it to be
/usr. This way, the
don't know if this is the right way for qsynth, but with qjackctl the
same error occurs when using /usr as QTDIR. setting QTDIR to
/usr/share/qt3 solves the problem (debian sid).
bests,
martin
9:23 a.m.
On Fri, 2 Jan 2004 15:08:25 +0100
martin rumori <lists(a)rumori.de> wrote:
On Fri, Jan 02, 2004 at 02:09:05PM +0100, Florian
Schmidt wrote:
Ah, i see.. judging from the looks of this dir and its contents, yes,
that should work.... it does.. thanks for the tip!
Flo
--
music: http://www.soundclick.com/bands/9/florianschmidt.htm
i just compiled qsynth-0.1.0 and i would lie to
report on my
findings:
There's no QTDIR per se. So i exported it to
be /usr. This way, the
don't know if this is the right way for qsynth, but with qjackctl the
same error occurs when using /usr as QTDIR. setting QTDIR to
/usr/share/qt3 solves the problem (debian sid). 
9:22 a.m.
Hi list (happy new year etc. yada yada),
mista.tapas(a)gmx.net wrote:
i just compiled qsynth-0.1.0 and i would lie to report
on my findings:
On Debian, the qt-libs are installed to
/usr/lib/
and the headers to
/usr/include/qt3
There's no QTDIR per se. So i exported it to be /usr. This way, the
configure script finds the lib, but the following test fails:
That's not quite correct; one of the Debian Qt packages says that IF you
set QTDIR, it should be /usr/share/qt3. I did this in my
~/.bash_profile, and had no problems building qsynth, qjackctl etc. this
way.
No source changes should be required to build this package.
Greetings,
Frank
11:51 a.m.
any advice on how to handle qt when compiling ams on debian?
the ams Makefile has these at the top:
QT_BASE_DIR=/usr/lib/qt3
QT_LIB_DIR=$(QT_BASE_DIR)/lib
QT_BIN_DIR=$(QT_BASE_DIR)/bin
QT_INCLUDE_DIR=$(QT_BASE_DIR)/include
/usr/share/qt/ doesn't seem to have a lib/ directory ...
-Eric Rz
On Fri, Jan 02, 2004 at 03:19:29PM +0100, Frank Neumann wrote:
Hi list (happy new year etc. yada yada),
mista.tapas(a)gmx.net wrote:
i just compiled qsynth-0.1.0 and i would lie to
report on my findings:
On Debian, the qt-libs are installed to
/usr/lib/
and the headers to
/usr/include/qt3
There's no QTDIR per se. So i exported it to be /usr. This way, the
configure script finds the lib, but the following test fails:
That's not quite correct; one of the Debian Qt packages says that IF you
set QTDIR, it should be /usr/share/qt3. I did this in my
~/.bash_profile, and had no problems building qsynth, qjackctl etc. this
way.
No source changes should be required to build this package.
Greetings,
Frank
12:11 p.m.
Hi all,
rzewnickie(a)rfa.org wrote:
any advice on how to handle qt when compiling ams on
debian?
Hmm..very similar to qjackctl etc:
the ams Makefile has these at the top:
QT_BASE_DIR=/usr/lib/qt3
QT_LIB_DIR=$(QT_BASE_DIR)/lib
QT_BIN_DIR=$(QT_BASE_DIR)/bin
QT_INCLUDE_DIR=$(QT_BASE_DIR)/include
In this Makefile, I set "QT_BASE_DIR" to /usr/share/qt3. That's all.
/usr/share/qt/ doesn't seem to have a lib/
directory ...
/usr/share/qt or /usr/share/qt3? Also, what is your current Qt version?
3.1.x or above? If yes, the above should be ok for you..
Greetings,
Frank
2:31 p.m.
well, I'm at work right now where I run debian stable, so, yes it
is /usr/share/qt and the version of qt is 3.0.3. This box isn't really
set up for any audio stuff (other than alsaplayer) since making sounds
isn't part of my job :( . So I probably won't bother trying to get ams
running on it. I don't have jack or fftw or ladspa installed so ams
won't compile anyway.
When I get home I'll try this on my debian testing (sarge) audio box and
see how far I get. Thanks.
-Eric Rz.
On Fri, Jan 02, 2004 at 06:09:14PM +0100, Frank Neumann wrote:
Hi all,
rzewnickie(a)rfa.org wrote:
any advice on how to handle qt when compiling ams
on debian?
Hmm..very similar to qjackctl etc:
the ams Makefile has these at the top:
QT_BASE_DIR=/usr/lib/qt3
QT_LIB_DIR=$(QT_BASE_DIR)/lib
QT_BIN_DIR=$(QT_BASE_DIR)/bin
QT_INCLUDE_DIR=$(QT_BASE_DIR)/include
In this Makefile, I set "QT_BASE_DIR" to /usr/share/qt3. That's all.
/usr/share/qt/ doesn't seem to have a lib/
directory ...
/usr/share/qt or /usr/share/qt3? Also, what is your current Qt version?
3.1.x or above? If yes, the above should be ok for you..
Greetings,
Frank 
11:29 p.m.
Well ... no luck. The compile will start, but fails with a lot of errors
-- see below ... I'm sending this to the alsamodular-devel list as well,
but that list seems to be pretty much inactive (only 6 posts in past 5
months). I've heard great things about this synth, but have thus far
been unable to hear it for myself.
Eric Dantan Rzewnicki wrote:
When I get home I'll try this on my debian testing
(sarge) audio box and
see how far I get. Thanks.
-Eric Rz.
/usr/share/qt3/doc/html/qlist.html is the only file on my system that
comes up in a locate qlist ... it says:
"QList Class Reference (obsolete)
#include <qlist.h>
The QList class has been renamed QPtrList in Qt 3.0. "
In file included from synthdata.cpp:6:
synthdata.h:8:19: qlist.h: No such file or directory
...
synthdata.h:69: error: 'QList' is used as a type, but is not defined as
a type.
synthdata.h:70: error: 'QList' is used as a type, but is not defined as
a type.
synthdata.h:71: error: 'QList' is used as a type, but is not defined as
a type.
In file included from m_env.h:20,
from synthdata.cpp:7:
module.h:20:19: qlist.h: No such file or directory
In file included from midislider.h:9,
from configdialog.h:24,
from module.h:23,
from m_env.h:20,
from synthdata.cpp:7:
midicontroller.h:5:19: qlist.h: No such file or directory
In file included from midislider.h:10,
from configdialog.h:24,
from module.h:23,
from m_env.h:20,
from synthdata.cpp:7:
midiguicomponent.h:5:19: qlist.h: No such file or directory
In file included from midiguicomponent.h:9,
from midislider.h:10,
from configdialog.h:24,
from module.h:23,
from m_env.h:20,
from synthdata.cpp:7:
midicontrollerlist.h:4:19: qlist.h: No such file or directory
midicontrollerlist.h:5:25: qcollection.h: No such file or directory
In file included from module.h:24,
from m_env.h:20,
from synthdata.cpp:7:
port.h:8:19: qlist.h: No such file or directory
synthdata.cpp: In member function `int SynthData::nextFreeOsc()':
synthdata.cpp:147: error: `listM_env' undeclared (first use this
function)
synthdata.cpp:147: error: (Each undeclared identifier is reported only
once for
each function it appears in.)
synthdata.cpp:152: error: `listM_vcenv' undeclared (first use this
function)
synthdata.cpp:157: error: `listM_advenv' undeclared (first use this
function)
synthdata.cpp:162: error: `listM_dynamicwaves' undeclared (first use
this
function)
synthdata.cpp: In member function `float SynthData::exp_table(float)':
synthdata.cpp:276: warning: assignment to `int' from `double'
synthdata.cpp:276: warning: argument to `int' from `double'
synthdata.cpp: In member function `void* SynthData::alsa_thr_main()':
synthdata.cpp:384: warning: comparison between signed and unsigned
integer
expressions
synthdata.cpp: In member function `void SynthData::call_modules()':
synthdata.cpp:545: error: `wavoutModuleList' undeclared (first use this
function)
synthdata.cpp:546: error: `scopeModuleList' undeclared (first use this
function)
synthdata.cpp:547: error: `spectrumModuleList' undeclared (first use
this
function)
synthdata.cpp:548: error: `midioutModuleList' undeclared (first use this
function)
synthdata.cpp:549: error: `moduleList' undeclared (first use this
function)
make: *** [synthdata.o] Error 1
3 Jan
3 Jan
3:18 p.m.
Hallo,
Eric Dantan Rzewnicki hat gesagt: // Eric Dantan Rzewnicki wrote:
Well ... no luck. The compile will start, but fails
with a lot of errors
-- see below ... I'm sending this to the alsamodular-devel list as well,
but that list seems to be pretty much inactive (only 6 posts in past 5
months). I've heard great things about this synth, but have thus far
been unable to hear it for myself.
Eric Dantan Rzewnicki wrote:
Hah, I stumbled over that on Debian, too, but I did find a solution.
You're missing some old headers that aren't anymore in recent QTs
unless you install a package that in D. unstable now is called
libqt3-compat-headers.
But IIRC it was named slightly else on older Debians, although very
similar. Maybe qt3-compat? I'm not sure right now.
ciao
--
Frank Barknecht _ ______footils.org__
When I get home I'll try this on my debian
testing (sarge) audio box and
see how far I get. Thanks.
-Eric Rz.
/usr/share/qt3/doc/html/qlist.html is the only file on my system that
comes up in a locate qlist ... it says:
"QList Class Reference (obsolete)
#include <qlist.h>
The QList class has been renamed QPtrList in Qt 3.0. "
8:31 p.m.
New subject: [linux-audio-dev] ams compile issues [was: qsynth configure script fails on debian [qt]]
I found and installed libqt3-compat-headers. The compile got much
further this time, but still no joy. There are a lot of compiler
warnings and errors. The errors would seem to indicate I'm using an
incompatible alsa version (or ams' alsa support is outdated ... ) I'm
working with the most recent tarball of ams-1.7.1 from sourceforge.
My current settup: (tail end of compiler errors below)
PII 400 768MB
6GB / /dev/hda2
60GB /mnt/audio/ /dev/hdc1
drives tuned
128MB swap /dev/hda1
M-Audio Delta-66 w/omni i/o
debian testing (sarge)
2.4.22-box1-pell-1
alsa-1.0.0rc2
./configure --with-isapnp=no --with-sequencer=yes --with-oss=no \
--with-cards=dummy,virmidi,serial-u16550,mpu401,ice1712,ymfpci
libsndfile-1.0.5
from tar.gz. debian only had 1.0.4
jack-0.91.1
./configure --enable-optimize --with-default-tmpdir=/mnt/ramfs/
--disable-portaudio
ecasound-2.3.2
./configure --enable-pyecasound --disable-oss --disable-arts
/usr/include/alsa/pcm.h:604: error: too few arguments to function `int
snd_pcm_hw_params_get_periods(const snd_pcm_hw_params_t*, unsigned
int*,
int*)'
alsa_driver.cc:150: error: at this point in file
/usr/include/alsa/pcm.h:539: error: too few arguments to function `int
snd_pcm_hw_params_get_format(const snd_pcm_hw_params_t*,
snd_pcm_format_t*)'
alsa_driver.cc:151: error: at this point in file
/usr/include/alsa/pcm.h:531: error: too few arguments to function `int
snd_pcm_hw_params_get_access(const snd_pcm_hw_params_t*,
snd_pcm_access_t*)'
alsa_driver.cc:152: error: at this point in file
alsa_driver.cc:157: error: invalid conversion from `int*' to `
snd_pcm_uframes_t*'
/usr/include/alsa/pcm.h:591: error: too few arguments to function `int
snd_pcm_hw_params_get_period_size(const snd_pcm_hw_params_t*,
snd_pcm_uframes_t*, int*)'
alsa_driver.cc:157: error: at this point in file
alsa_driver.cc:157: warning: comparison between signed and unsigned
integer
expressions
alsa_driver.cc:165: error: invalid conversion from `int*' to `unsigned
int*'
/usr/include/alsa/pcm.h:604: error: too few arguments to function `int
snd_pcm_hw_params_get_periods(const snd_pcm_hw_params_t*, unsigned
int*,
int*)'
alsa_driver.cc:165: error: at this point in file
alsa_driver.cc:165: warning: comparison between signed and unsigned
integer
expressions
/usr/include/alsa/pcm.h:539: error: too few arguments to function `int
snd_pcm_hw_params_get_format(const snd_pcm_hw_params_t*,
snd_pcm_format_t*)'
alsa_driver.cc:170: error: at this point in file
/usr/include/alsa/pcm.h:531: error: too few arguments to function `int
snd_pcm_hw_params_get_access(const snd_pcm_hw_params_t*,
snd_pcm_access_t*)'
alsa_driver.cc:175: error: at this point in file
alsa_driver.cc:183: error: invalid conversion from `int*' to `unsigned
int*'
/usr/include/alsa/pcm.h:604: error: too few arguments to function `int
snd_pcm_hw_params_get_periods(const snd_pcm_hw_params_t*, unsigned
int*,
int*)'
alsa_driver.cc:183: error: at this point in file
/usr/include/alsa/pcm.h:539: error: too few arguments to function `int
snd_pcm_hw_params_get_format(const snd_pcm_hw_params_t*,
snd_pcm_format_t*)'
alsa_driver.cc:184: error: at this point in file
/usr/include/alsa/pcm.h:531: error: too few arguments to function `int
snd_pcm_hw_params_get_access(const snd_pcm_hw_params_t*,
snd_pcm_access_t*)'
alsa_driver.cc:185: error: at this point in file
alsa_driver.cc: In member function `int Alsa_driver::pcm_start()':
alsa_driver.cc:304: warning: comparison between signed and unsigned
integer
expressions
alsa_driver.cc: In member function `int
Alsa_driver::set_hwpar(snd_pcm_t*,
snd_pcm_hw_params_t*, int*)':
alsa_driver.cc:547: error: invalid conversion from `long unsigned int'
to `
unsigned int*'
/usr/include/alsa/pcm.h:557: error: too few arguments to function `int
snd_pcm_hw_params_get_channels_max(const snd_pcm_hw_params_t*,
unsigned
int*)'
alsa_driver.cc:553: error: at this point in file
make: *** [alsa_driver.o] Error 1
Frank Barknecht wrote:
Hallo,
Eric Dantan Rzewnicki hat gesagt: // Eric Dantan Rzewnicki wrote:
Well ... no luck. The compile will start, but
fails with a lot of errors
-- see below ... I'm sending this to the alsamodular-devel list as well,
but that list seems to be pretty much inactive (only 6 posts in past 5
months). I've heard great things about this synth, but have thus far
been unable to hear it for myself.
Eric Dantan Rzewnicki wrote:
Hah, I stumbled over that on Debian, too, but I did find a solution.
You're missing some old headers that aren't anymore in recent QTs
unless you install a package that in D. unstable now is called
libqt3-compat-headers.
But IIRC it was named slightly else on older Debians, although very
similar. Maybe qt3-compat? I'm not sure right now.
ciao
--
Frank Barknecht _ ______footils.org__ When I get home I'll try this on my debian
testing (sarge) audio box and
see how far I get. Thanks.
-Eric Rz.
/usr/share/qt3/doc/html/qlist.html is the only file on my system that
comes up in a locate qlist ... it says:
"QList Class Reference (obsolete)
#include <qlist.h>
The QList class has been renamed QPtrList in Qt 3.0. "
7 Jan
7 Jan
7:43 a.m.
New subject: [linux-audio-dev] ams compile issues [was: qsynth configure script fails on debian [qt]]
Hi list,
on Sunday eric(a)zhevny.com wrote:
I found and installed libqt3-compat-headers. The
compile got much
further this time, but still no joy. There are a lot of compiler
warnings and errors. The errors would seem to indicate I'm using an
incompatible alsa version (or ams' alsa support is outdated ... ) I'm
working with the most recent tarball of ams-1.7.1 from sourceforge.
[..]
alsa-1.0.0rc2
./configure --with-isapnp=no --with-sequencer=yes --with-oss=no \
--with-cards=dummy,virmidi,serial-u16550,mpu401,ice1712,ymfpci
libsndfile-1.0.5
from tar.gz. debian only had 1.0.4
jack-0.91.1
./configure --enable-optimize --with-default-tmpdir=/mnt/ramfs/
--disable-portaudio
ecasound-2.3.2
./configure --enable-pyecasound --disable-oss --disable-arts
/usr/include/alsa/pcm.h:604: error: too few arguments to function `int
snd_pcm_hw_params_get_periods(const snd_pcm_hw_params_t*, unsigned
int*,
int*)'
To all those who do not read alsamodular-devel: The fix here is to add
two lines at the top of alsa_driver.h, just BEFORE the #include
<alsa/asoundlib.h> line:
#define ALSA_PCM_OLD_HW_PARAMS_API
#define ALSA_PCM_OLD_SW_PARAMS_API
That should compile and link ams-1.7.1 fine for you.
Frank
8:58 a.m.
New subject: [linux-audio-dev] ams compile issues [was: qsynth configure script fails on debian [qt]]
On Wed, Jan 07, 2004 at 01:40:32PM +0100, Frank Neumann wrote:
To all those who do not read alsamodular-devel: The
fix here is to add
two lines at the top of alsa_driver.h, just BEFORE the #include
<alsa/asoundlib.h> line:
#define ALSA_PCM_OLD_HW_PARAMS_API
#define ALSA_PCM_OLD_SW_PARAMS_API
That should compile and link ams-1.7.1 fine for you.
AFAIK (and I will verify this ASAP), this is fixed in CVS,
and will be fixed of course in the next release.
Thanks to Frank (and another poster a few days ago) for
the fix.
--
Fons
8 Jan
8 Jan
12:41 a.m.
New subject: [linux-audio-dev] ams compile issues [was: qsynth configurescript fails on debian [qt]]
Frank Neumann wrote:
To all those who do not read alsamodular-devel: The fix here is to add
two lines at the top of alsa_driver.h, just BEFORE the #include
<alsa/asoundlib.h> line:
#define ALSA_PCM_OLD_HW_PARAMS_API
#define ALSA_PCM_OLD_SW_PARAMS_API
That should compile and link ams-1.7.1 fine for you.
Frank
Frank,
Thank you. I now have a working ams.
-ERic Rz.
13 Jan
13 Jan
12:23 p.m.
New subject: [linux-audio-dev] Re: [Alsamodular-devel] ams compile issues [was: qsynth configure script fails on debian [qt]]
Hello Eric,
this is a known problem with ALSA 1.0 incompatibility. Has been fixed in
CVS. Solution (from an earlier posing on this list):
Just make the beginning of alsa_driver.h look like
this:
#ifndef __ALSA_DRIVER_H
#define __ALSA_DRIVER_H
#define ALSA_PCM_OLD_HW_PARAMS_API /* <-- These are the lines */
#define ALSA_PCM_OLD_SW_PARAMS_API /* <-- you need to paste in*/
#include <alsa/asoundlib.h>
Matthias
On Sat, 3 Jan 2004, Eric Dantan Rzewnicki wrote:
I found and installed libqt3-compat-headers. The
compile got much
further this time, but still no joy. There are a lot of compiler
warnings and errors. The errors would seem to indicate I'm using an
incompatible alsa version (or ams' alsa support is outdated ... ) I'm
working with the most recent tarball of ams-1.7.1 from sourceforge.
My current settup: (tail end of compiler errors below)
PII 400 768MB
6GB / /dev/hda2
60GB /mnt/audio/ /dev/hdc1
drives tuned
128MB swap /dev/hda1
M-Audio Delta-66 w/omni i/o
debian testing (sarge)
2.4.22-box1-pell-1
alsa-1.0.0rc2
./configure --with-isapnp=no --with-sequencer=yes --with-oss=no \
--with-cards=dummy,virmidi,serial-u16550,mpu401,ice1712,ymfpci
libsndfile-1.0.5
from tar.gz. debian only had 1.0.4
jack-0.91.1
./configure --enable-optimize --with-default-tmpdir=/mnt/ramfs/
--disable-portaudio
ecasound-2.3.2
./configure --enable-pyecasound --disable-oss --disable-arts
/usr/include/alsa/pcm.h:604: error: too few arguments to function `int
snd_pcm_hw_params_get_periods(const snd_pcm_hw_params_t*, unsigned
int*,
int*)'
alsa_driver.cc:150: error: at this point in file
/usr/include/alsa/pcm.h:539: error: too few arguments to function `int
snd_pcm_hw_params_get_format(const snd_pcm_hw_params_t*,
snd_pcm_format_t*)'
alsa_driver.cc:151: error: at this point in file
/usr/include/alsa/pcm.h:531: error: too few arguments to function `int
snd_pcm_hw_params_get_access(const snd_pcm_hw_params_t*,
snd_pcm_access_t*)'
alsa_driver.cc:152: error: at this point in file
alsa_driver.cc:157: error: invalid conversion from `int*' to `
snd_pcm_uframes_t*'
/usr/include/alsa/pcm.h:591: error: too few arguments to function `int
snd_pcm_hw_params_get_period_size(const snd_pcm_hw_params_t*,
snd_pcm_uframes_t*, int*)'
alsa_driver.cc:157: error: at this point in file
alsa_driver.cc:157: warning: comparison between signed and unsigned
integer
expressions
alsa_driver.cc:165: error: invalid conversion from `int*' to `unsigned
int*'
/usr/include/alsa/pcm.h:604: error: too few arguments to function `int
snd_pcm_hw_params_get_periods(const snd_pcm_hw_params_t*, unsigned
int*,
int*)'
alsa_driver.cc:165: error: at this point in file
alsa_driver.cc:165: warning: comparison between signed and unsigned
integer
expressions
/usr/include/alsa/pcm.h:539: error: too few arguments to function `int
snd_pcm_hw_params_get_format(const snd_pcm_hw_params_t*,
snd_pcm_format_t*)'
alsa_driver.cc:170: error: at this point in file
/usr/include/alsa/pcm.h:531: error: too few arguments to function `int
snd_pcm_hw_params_get_access(const snd_pcm_hw_params_t*,
snd_pcm_access_t*)'
alsa_driver.cc:175: error: at this point in file
alsa_driver.cc:183: error: invalid conversion from `int*' to `unsigned
int*'
/usr/include/alsa/pcm.h:604: error: too few arguments to function `int
snd_pcm_hw_params_get_periods(const snd_pcm_hw_params_t*, unsigned
int*,
int*)'
alsa_driver.cc:183: error: at this point in file
/usr/include/alsa/pcm.h:539: error: too few arguments to function `int
snd_pcm_hw_params_get_format(const snd_pcm_hw_params_t*,
snd_pcm_format_t*)'
alsa_driver.cc:184: error: at this point in file
/usr/include/alsa/pcm.h:531: error: too few arguments to function `int
snd_pcm_hw_params_get_access(const snd_pcm_hw_params_t*,
snd_pcm_access_t*)'
alsa_driver.cc:185: error: at this point in file
alsa_driver.cc: In member function `int Alsa_driver::pcm_start()':
alsa_driver.cc:304: warning: comparison between signed and unsigned
integer
expressions
alsa_driver.cc: In member function `int
Alsa_driver::set_hwpar(snd_pcm_t*,
snd_pcm_hw_params_t*, int*)':
alsa_driver.cc:547: error: invalid conversion from `long unsigned int'
to `
unsigned int*'
/usr/include/alsa/pcm.h:557: error: too few arguments to function `int
snd_pcm_hw_params_get_channels_max(const snd_pcm_hw_params_t*,
unsigned
int*)'
alsa_driver.cc:553: error: at this point in file
make: *** [alsa_driver.o] Error 1
Frank Barknecht wrote:
--
Dr. Matthias Nagorni
SuSE Linux AG
Maxfeldstr. 5 phone: +49 911 74053375
D - 90409 Nuernberg fax : +49 911 74053483
Hallo,
Eric Dantan Rzewnicki hat gesagt: // Eric Dantan Rzewnicki wrote:
-------------------------------------------------------
This SF.net email is sponsored by: IBM Linux Tutorials.
Become an expert in LINUX or just sharpen your skills. Sign up for IBM's
Free Linux Tutorials. Learn everything from the bash shell to sys admin.
Click now! http://ads.osdn.com/?ad_id=1278&alloc_id=3371&op=click
_______________________________________________
Alsamodular-devel mailing list
Alsamodular-devel(a)lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/alsamodular-devel
Well ... no luck. The compile will start, but
fails with a lot of errors
-- see below ... I'm sending this to the alsamodular-devel list as well,
but that list seems to be pretty much inactive (only 6 posts in past 5
months). I've heard great things about this synth, but have thus far
been unable to hear it for myself.
Eric Dantan Rzewnicki wrote:
Hah, I stumbled over that on Debian, too, but I did find a solution.
You're missing some old headers that aren't anymore in recent QTs
unless you install a package that in D. unstable now is called
libqt3-compat-headers.
But IIRC it was named slightly else on older Debians, although very
similar. Maybe qt3-compat? I'm not sure right now.
ciao
--
Frank Barknecht _ ______footils.org__ When I get home I'll try this on my debian
testing (sarge) audio box and
see how far I get. Thanks.
-Eric Rz.
/usr/share/qt3/doc/html/qlist.html is the only file on my system that
comes up in a locate qlist ... it says:
"QList Class Reference (obsolete)
#include <qlist.h>
The QList class has been renamed QPtrList in Qt 3.0. "
10:52 p.m.
New subject: [linux-audio-dev] Re: [Alsamodular-devel] ams compile issues [was: qsynth configurescript fails on debian [qt]]
Matthias,
Thank you. It works now.
ams is very cool. :)
-Eric Rz.
Matthias Nagorni wrote:
Hello Eric,
this is a known problem with ALSA 1.0 incompatibility. Has been fixed in
CVS. Solution (from an earlier posing on this list):
Just make the beginning of alsa_driver.h look
like this:
#ifndef __ALSA_DRIVER_H
#define __ALSA_DRIVER_H
#define ALSA_PCM_OLD_HW_PARAMS_API /* <-- These are the lines */
#define ALSA_PCM_OLD_SW_PARAMS_API /* <-- you need to paste in*/
#include <alsa/asoundlib.h>
Matthias
On Sat, 3 Jan 2004, Eric Dantan Rzewnicki wrote:
I found and installed libqt3-compat-headers. The
compile got much
further this time, but still no joy. There are a lot of compiler
warnings and errors. The errors would seem to indicate I'm using an
incompatible alsa version (or ams' alsa support is outdated ... ) I'm
working with the most recent tarball of ams-1.7.1 from sourceforge.
My current settup: (tail end of compiler errors below)
PII 400 768MB
6GB / /dev/hda2
60GB /mnt/audio/ /dev/hdc1
drives tuned
128MB swap /dev/hda1
M-Audio Delta-66 w/omni i/o
debian testing (sarge)
2.4.22-box1-pell-1
alsa-1.0.0rc2
./configure --with-isapnp=no --with-sequencer=yes --with-oss=no \
--with-cards=dummy,virmidi,serial-u16550,mpu401,ice1712,ymfpci
libsndfile-1.0.5
from tar.gz. debian only had 1.0.4
jack-0.91.1
./configure --enable-optimize --with-default-tmpdir=/mnt/ramfs/
--disable-portaudio
ecasound-2.3.2
./configure --enable-pyecasound --disable-oss --disable-arts
/usr/include/alsa/pcm.h:604: error: too few arguments to function `int
snd_pcm_hw_params_get_periods(const snd_pcm_hw_params_t*, unsigned
int*,
int*)'
alsa_driver.cc:150: error: at this point in file
/usr/include/alsa/pcm.h:539: error: too few arguments to function `int
snd_pcm_hw_params_get_format(const snd_pcm_hw_params_t*,
snd_pcm_format_t*)'
alsa_driver.cc:151: error: at this point in file
/usr/include/alsa/pcm.h:531: error: too few arguments to function `int
snd_pcm_hw_params_get_access(const snd_pcm_hw_params_t*,
snd_pcm_access_t*)'
alsa_driver.cc:152: error: at this point in file
alsa_driver.cc:157: error: invalid conversion from `int*' to `
snd_pcm_uframes_t*'
/usr/include/alsa/pcm.h:591: error: too few arguments to function `int
snd_pcm_hw_params_get_period_size(const snd_pcm_hw_params_t*,
snd_pcm_uframes_t*, int*)'
alsa_driver.cc:157: error: at this point in file
alsa_driver.cc:157: warning: comparison between signed and unsigned
integer
expressions
alsa_driver.cc:165: error: invalid conversion from `int*' to `unsigned
int*'
/usr/include/alsa/pcm.h:604: error: too few arguments to function `int
snd_pcm_hw_params_get_periods(const snd_pcm_hw_params_t*, unsigned
int*,
int*)'
alsa_driver.cc:165: error: at this point in file
alsa_driver.cc:165: warning: comparison between signed and unsigned
integer
expressions
/usr/include/alsa/pcm.h:539: error: too few arguments to function `int
snd_pcm_hw_params_get_format(const snd_pcm_hw_params_t*,
snd_pcm_format_t*)'
alsa_driver.cc:170: error: at this point in file
/usr/include/alsa/pcm.h:531: error: too few arguments to function `int
snd_pcm_hw_params_get_access(const snd_pcm_hw_params_t*,
snd_pcm_access_t*)'
alsa_driver.cc:175: error: at this point in file
alsa_driver.cc:183: error: invalid conversion from `int*' to `unsigned
int*'
/usr/include/alsa/pcm.h:604: error: too few arguments to function `int
snd_pcm_hw_params_get_periods(const snd_pcm_hw_params_t*, unsigned
int*,
int*)'
alsa_driver.cc:183: error: at this point in file
/usr/include/alsa/pcm.h:539: error: too few arguments to function `int
snd_pcm_hw_params_get_format(const snd_pcm_hw_params_t*,
snd_pcm_format_t*)'
alsa_driver.cc:184: error: at this point in file
/usr/include/alsa/pcm.h:531: error: too few arguments to function `int
snd_pcm_hw_params_get_access(const snd_pcm_hw_params_t*,
snd_pcm_access_t*)'
alsa_driver.cc:185: error: at this point in file
alsa_driver.cc: In member function `int Alsa_driver::pcm_start()':
alsa_driver.cc:304: warning: comparison between signed and unsigned
integer
expressions
alsa_driver.cc: In member function `int
Alsa_driver::set_hwpar(snd_pcm_t*,
snd_pcm_hw_params_t*, int*)':
alsa_driver.cc:547: error: invalid conversion from `long unsigned int'
to `
unsigned int*'
/usr/include/alsa/pcm.h:557: error: too few arguments to function `int
snd_pcm_hw_params_get_channels_max(const snd_pcm_hw_params_t*,
unsigned
int*)'
alsa_driver.cc:553: error: at this point in file
make: *** [alsa_driver.o] Error 1
Frank Barknecht wrote:
--
Dr. Matthias Nagorni
SuSE Linux AG
Maxfeldstr. 5 phone: +49 911 74053375
D - 90409 Nuernberg fax : +49 911 74053483
Hallo,
Eric Dantan Rzewnicki hat gesagt: // Eric Dantan Rzewnicki wrote:
-------------------------------------------------------
This SF.net email is sponsored by: IBM Linux Tutorials.
Become an expert in LINUX or just sharpen your skills. Sign up for IBM's
Free Linux Tutorials. Learn everything from the bash shell to sys admin.
Click now! http://ads.osdn.com/?ad_id=1278&alloc_id=3371&op=click
_______________________________________________
Alsamodular-devel mailing list
Alsamodular-devel(a)lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/alsamodular-devel
Well ... no luck. The compile will start, but
fails with a lot of errors
-- see below ... I'm sending this to the alsamodular-devel list as well,
but that list seems to be pretty much inactive (only 6 posts in past 5
months). I've heard great things about this synth, but have thus far
been unable to hear it for myself.
Eric Dantan Rzewnicki wrote:
> When I get home I'll try this on my debian testing (sarge) audio box and
> see how far I get. Thanks.
>
> -Eric Rz.
/usr/share/qt3/doc/html/qlist.html is the only file on my system that
comes up in a locate qlist ... it says:
"QList Class Reference (obsolete)
#include <qlist.h>
The QList class has been renamed QPtrList in Qt 3.0. "
Hah, I stumbled over that on Debian, too, but I did find a solution.
You're missing some old headers that aren't anymore in recent QTs
unless you install a package that in D. unstable now is called
libqt3-compat-headers.
But IIRC it was named slightly else on older Debians, although very
similar. Maybe qt3-compat? I'm not sure right now.
ciao
--
Frank Barknecht _ ______footils.org__
19 Jan
19 Jan
5:10 a.m.
New subject: [linux-audio-dev] Polyphony in AlsaModularSynth
Hello,
just taken out of the modular synth thread:
Indeed, I could reproduce the problem concerning missing notes in ams
polyphonic mode. I use ams as a monosynth most of the time, therefore
I overlooked it. The algorithm I implemented checks for the weakest note
(in terms of envelope amplitude) to allocate a new voice if all voices are
busy.
I'll try to fix this ASAP and let you know.
Matthias
--
Dr. Matthias Nagorni
SuSE Linux AG
Maxfeldstr. 5 phone: +49 911 74053375
D - 90409 Nuernberg fax : +49 911 74053483
7770
days inactive
7787
days old
linux-audio-dev@lists.linuxaudio.org
15 comments
8 participants
participants (8)
-
Alfons Adriaensen -
Eric Dantan Rzewnicki -
Eric Dantan Rzewnicki -
Florian Schmidt -
Frank Barknecht -
Frank Neumann -
martin rumori -
Matthias Nagorni