30 Apr
2009
30 Apr
'09
1:05 p.m.
Hello!
I am trying to build a high speed usb audio hardware device that will
work using existing audio class drivers.
I can get it to play in synchronous mode but i really want to use
adaptive synchronization which gives the following kernel error
cannot submit syncpipe for urb 0, error -90: internal error
I cant seem to figure out what i am doing wrong. Some hints would be of
much value to me.
--
thg
5 May
5 May
5:55 a.m.
Tor Håkon Gjerde wrote:
I am trying to build a high speed usb audio hardware
device that will
work using existing audio class drivers.
I can get it to play in synchronous mode but i really want to use
adaptive synchronization which gives the following kernel error
cannot submit syncpipe for urb 0, error -90: internal error
Error code -90 is -EMSGSIZE.
linux/Documentation/usb/error-codes.txt says:
| -EMSGSIZE (a) endpoint maxpacket size is zero; it is not usable
| in the current interface altsetting.
| (b) ISO packet is larger than the endpoint maxpacket.
| (c) requested data transfer length is invalid: negative
| or too large for the host controller.
Assuming that the driver doesn't have a bug, I'd guess we have case (b),
and the descriptors of your device say that sync packets must be smaller
than four bytes.
According to my interpretation of the USB 2.0 specification, high speed
sync pipes use four-byte packets containing a 12.13 value that specifies
the number of samples per microframe.
Best regards,
Clemens
5709
days inactive
5714
days old
linux-audio-dev@lists.linuxaudio.org
1 comments
2 participants
participants (2)
-
Clemens Ladisch -
Tor Håkon Gjerde