7 Apr
2008
7 Apr
'08
9:22 p.m.
jack_capture
:
*Added the --meterbridge / -mb option, which automatically
starts Steve Harris' meterbridge (http://plugin.org.uk/meterbridge/)
and constantly connects them to the same ports as jack_capture
is connected to.
Nice - this will save me the hassle of starting meterbridge manually when
setting up for recording and having to make sure that meterbridge's channels
actually match jack_capture's channels.
Thanks for the update!
jonathan
7 Apr
7 Apr
9:38 p.m.
New subject: [ANN] jack_capture V0.9.10 and Snd-ls V0.9.8.16
On Tue, 8 Apr 2008, Jonathan Woithe wrote:
Great to hear!
Do you need an option to select a different
meter type than "vu" when starting meterbridge?
Also, have you looked at the new default
built-in console "vu" meter? I personally think
its more than good enough.
I wasn't sure whether I should show a dB meter, or just
show the linear float
0.0-1.0 value. Since I'm more used to pure float,
and that it was straight forward to implement, I chose
the latter, but maybe someone really would prefer
a dB meter instead?
jack_capture
:
*Added the --meterbridge / -mb option, which automatically
starts Steve Harris' meterbridge (http://plugin.org.uk/meterbridge/)
and constantly connects them to the same ports as jack_capture
is connected to.
Nice - this will save me the hassle of starting meterbridge manually when
setting up for recording and having to make sure that meterbridge's channels
actually match jack_capture's channels.
9:56 p.m.
New subject: [ANN] jack_capture V0.9.10 and Snd-ls V0.9.8.16
Hi
Do you need an option to select a different
meter type than "vu" when starting meterbridge?
It would probably be nice. The VUs look good but they take up a fair amount
of real estate and trying to monitor 8 at once can be a bit tricky. In
addition, one can miss clipping with a VU (although this can be addressed to
a point with the addition of a clip indicator). I normally use "dpm" for my
purposes. However, everyone has their own preferences and different
situations call for different metering, so an option to select this is
probably the way to go.
jack_capture
:
*Added the --meterbridge / -mb option, which automatically
starts Steve Harris' meterbridge (http://plugin.org.uk/meterbridge/)
and constantly connects them to the same ports as jack_capture
is connected to.
Nice - this will save me the hassle of starting meterbridge manually when
setting up for recording and having to make sure that meterbridge's channels
actually match jack_capture's channels. Also, have you looked at the new default built-in
console "vu" meter? I
personally think its more than good enough.
I haven't yet since I'm away from my audio computer. I intended to check it
out though since it sounds interesting.
I wasn't sure whether I should show a dB meter, or
just show the linear
float 0.0-1.0 value. Since I'm more used to pure float, and that it was
straight forward to implement, I chose the latter, but maybe someone
really would prefer a dB meter instead?
Personally I'd prefer a dB value since that's what I'm used to dealing with.
Again, having an option to select between linear float and dB would keep
everyone happy.
Regards
jonathan
10:31 p.m.
New subject: [ANN] jack_capture V0.9.10 and Snd-ls V0.9.8.16
On Tue, 8 Apr 2008, Jonathan Woithe wrote:
Hi
Do you need an option to select a different
meter type than "vu" when starting meterbridge?
It would probably be nice. The VUs look good but they take up a fair amount
of real estate and trying to monitor 8 at once can be a bit tricky. In
addition, one can miss clipping with a VU (although this can be addressed to
a point with the addition of a clip indicator). I normally use "dpm" for my
purposes. However, everyone has their own preferences and different
situations call for different metering, so an option to select this is
probably the way to go.
Yeah, it makes sense. I stole some code from meterbridge to convert from
linear to dB, and have just uploaded jack_capture V0.9.12, which also contains
an option to change meterbridge meter type.
jack_capture
:
*Added the --meterbridge / -mb option, which automatically
starts Steve Harris' meterbridge (http://plugin.org.uk/meterbridge/)
and constantly connects them to the same ports as jack_capture
is connected to.
Nice - this will save me the hassle of starting meterbridge manually when
setting up for recording and having to make sure that meterbridge's channels
actually match jack_capture's channels. Also, have you looked at the new default built-in
console "vu" meter? I
personally think its more than good enough.
I haven't yet since I'm away from my audio computer. I intended to check it
out though since it sounds interesting.
I wasn't sure whether I should show a dB
meter, or just show the linear
float 0.0-1.0 value. Since I'm more used to pure float, and that it was
straight forward to implement, I chose the latter, but maybe someone
really would prefer a dB meter instead?
Personally I'd prefer a dB value since that's what I'm used to dealing with.
Again, having an option to select between linear float and dB would keep
everyone happy.
10:39 p.m.
New subject: [ANN] jack_capture V0.9.10 and Snd-ls V0.9.8.16
Hi
:
Yeah, it makes sense. I stole some code from meterbridge to convert from
linear to dB, and have just uploaded jack_capture V0.9.12, which also contains
an option to change meterbridge meter type.
Sounds good. Thanks for this - it should make some worthwhile features even
more useful. I've just grabbed 0.9.12 and will give it a go as soon as I
can.
Regards
jonathan
Do you need an option to select a different
meter type than "vu" when starting meterbridge?
It would probably be nice. The VUs look good but they take up a fair amount
of real estate and trying to monitor 8 at once can be a bit tricky. In
addition, one can miss clipping with a VU (although this can be addressed to
a point with the addition of a clip indicator). I normally use "dpm" for my
purposes. However, everyone has their own preferences and different
situations call for different metering, so an option to select this is
probably the way to go. I
wasn't sure whether I should show a dB meter, or just show the linear
float 0.0-1.0 value. Since I'm more used to pure float, and that it was
straight forward to implement, I chose the latter, but maybe someone
really would prefer a dB meter instead?
Personally I'd prefer a dB value since that's what I'm used to dealing with.
Again, having an option to select between linear float and dB would keep
everyone happy.
11:04 p.m.
New subject: [ANN] jack_capture V0.9.10 and Snd-ls V0.9.8.16
On Tue, 8 Apr 2008, Jonathan Woithe wrote:
Hi
:
Yeah, it makes sense. I stole some code from meterbridge to convert from
linear to dB, and have just uploaded jack_capture V0.9.12, which also contains
an option to change meterbridge meter type.
Sounds good. Thanks for this - it should make some worthwhile features even
more useful. I've just grabbed 0.9.12 and will give it a go as soon as I
can.
Perhaps download 0.9.13 as well since I forgot to update --help in
0.9.12, plus that I have added peak indicators to 0.9.13. ;-)
Do you need an option to select a different
meter type than "vu" when starting meterbridge?
It would probably be nice. The VUs look good but they take up a fair amount
of real estate and trying to monitor 8 at once can be a bit tricky. In
addition, one can miss clipping with a VU (although this can be addressed to
a point with the addition of a clip indicator). I normally use "dpm" for my
purposes. However, everyone has their own preferences and different
situations call for different metering, so an option to select this is
probably the way to go. I
wasn't sure whether I should show a dB meter, or just show the linear
float 0.0-1.0 value. Since I'm more used to pure float, and that it was
straight forward to implement, I chose the latter, but maybe someone
really would prefer a dB meter instead?
Personally I'd prefer a dB value since that's what I'm used to dealing with.
Again, having an option to select between linear float and dB would keep
everyone happy.
11:20 p.m.
New subject: [ANN] jack_capture V0.9.10 and Snd-ls V0.9.8.16
Yeah, it makes sense. I stole some code from
meterbridge to convert from
linear to dB, and have just uploaded jack_capture V0.9.12, which also contains
an option to change meterbridge meter type.
Sounds good. Thanks for this - it should make some worthwhile features even
more useful. I've just grabbed 0.9.12 and will give it a go as soon as I
can.
6069
days inactive
6069
days old
linux-audio-dev@lists.linuxaudio.org
6 comments
2 participants
participants (2)
-
Jonathan Woithe -
Kjetil S. Matheussen