Hello all, The first release of jkmeter is now available in the usual place: <www.kokkizinita.net/linuxaudio/downloads> Also updates of japa and jnoise (mostly maintenance, but see also below). From the README: jkmeter-0.1.0 (03/08/2008) -------------------------- Jkmeter is a horizontal or vertical bargraph level meter based on the ideas of mastering guru Bob Katz. See <http://www.digido.com/bob-katz/index.php> and follow the links on 'level practices'. This is the type of meter you want for live recording, mixing and mastering. It probably makes no sense to use it on all tracks of a DAW, where keeping digital level within limits is the main purpose of metering. This release implements the K-20 meter. Future releases will include the K-14 meter as well. A K-meter displays both the true RMS level and the digital peak level. The ballistics as defined by Bob Katz are somewhat ambiguous. In this implementation the RMS meter is about 15% faster than an VU, but without the overshoot. This provides a good indication of subjective loudness. Instead of providing extra gain for the RMS level, the K-meter displays it on the same scale as the digital peak level, but puts the '0dB' mark and the color change well below the OdB full scale level. For the K-20 meter it is 20dB down, for the K-14 this is (surprise !) 14 dB. To use the meter as envisaged by Bob Katz, you should have a fixed monitoring level, adjusted so that pink noise indicating 0dB on the meter corresponds to 83 dB(C) (from each speaker) as indicated by an sound level meter. Note the (C) - not (A) - weighting. As of release 0.4.0, both japa and jnoise provide a pink noise source at exactly this level. The current release does not include the 22kHz lowpass filter required for frequencies such as 96kHz and higher. Enjoy !