7 Aug
2009
7 Aug
'09
7:20 a.m.
Patrick Shirkey:
Hi,
For those of you who are not subscribed to LAU, yesterday I had time to
run a test to see how easy and stable it was to run pulseaudio with jack
on Fedora 11.
I had a few problems at first but after upgrading to pulseaudio-0.9.16
(latest dev version) I was able to successfully connect Pulseaudio to
Jack and play tracks with Totem. It was still a little unstable as I was
able to bring pulse down a few times while using the
gnome-volume-control applet. However jack was not affected by pulse dying.
I did this on a standard Fedora kernel with a 2 core intel and 4 GB RAM.
My system load without any audio playing it was around 10%. While
playing a track with Totem through PA into Jack was around 20%. This
could be due to the visuals that were running at the same time. I was
able to listen to a complete 30 minute dj mix without any dropouts while
still using my system as usual. I am going to run a full day test of
audio playback today.
Which kernel are you running, and are you using a 32 or 64 bit
distribution?
I'm using the 32 bit distribution of fedora 11 with the latest
fedora PAE kernel. The cpu is a 4 core intel i7, 6 GB ram.
I haven't had any problems at all with pulseaudio/jack (only using
the packages provided by fedora), and I'm a bit surprised about
your post. But I haven't tried totem, I'll do when I get home.
29 Aug
29 Aug
5:21 p.m.
New subject: Running pulseaudio with jack
Kjetil S. Matheussen schrieb:
Patrick Shirkey:
Not sure how many people know. If someone does not want to run pulseaudio but
still use some gstreamer apps from time to time (totem, rythmbox etc.) -
gst-plugins-bad has jacksink and source plugins too.
Stefan
Hi,
For those of you who are not subscribed to LAU, yesterday I had time to
run a test to see how easy and stable it was to run pulseaudio with jack
on Fedora 11.
I had a few problems at first but after upgrading to pulseaudio-0.9.16
(latest dev version) I was able to successfully connect Pulseaudio to
Jack and play tracks with Totem. It was still a little unstable as I was
able to bring pulse down a few times while using the
gnome-volume-control applet. However jack was not affected by pulse dying.
I did this on a standard Fedora kernel with a 2 core intel and 4 GB RAM.
My system load without any audio playing it was around 10%. While
playing a track with Totem through PA into Jack was around 20%. This
could be due to the visuals that were running at the same time. I was
able to listen to a complete 30 minute dj mix without any dropouts while
still using my system as usual. I am going to run a full day test of
audio playback today.
Which kernel are you running, and are you using a 32 or 64 bit
distribution?
I'm using the 32 bit distribution of fedora 11 with the latest
fedora PAE kernel. The cpu is a 4 core intel i7, 6 GB ram.
I haven't had any problems at all with pulseaudio/jack (only using
the packages provided by fedora), and I'm a bit surprised about
your post. But I haven't tried totem, I'll do when I get home.
5363
days inactive
5385
days old
linux-audio-dev@lists.linuxaudio.org
1 comments
2 participants
participants (2)
-
Kjetil S. Matheussen -
Stefan Kost