2 Mar
2004
2 Mar
'04
7:33 a.m.
Hi!
I reorganized the Mx4 panel layout slightly to regain some screen
realestate.
Added a few more waweforms
Added intonation envelopes (pitch up/down) for each oscillator.
You get it at:
http://hem.passagen.se/ja_linux/
cheers // Jens M Andreasen
2 Mar
2 Mar
7:42 a.m.
I read:
I reorganized the Mx4 panel layout slightly to regain
some screen
.
.
you're not planning to support ppc (even without altivec optimizations)
are you ?
regards,
x
--
chris(a)lo-res.org Postmodernism is german romanticism with better
http://pilot.fm/ special effects. (Jeff Keuss / via ctheory.com)
7:57 a.m.
On tis, 2004-03-02 at 12:37, CK wrote:
I read:
The Apple G4 with altivec sits here on my desk ...
But I am a bit too lazy and uninspired these days ...
And also: The Intel version is getting along quite nicely :-)
cheers // Jens M Andreasen
PS: I forgot to mention that CPU is now down to under 1% per 4osc voice
on a Pentium II 400 Mhz
I reorganized the Mx4 panel layout slightly to
regain some screen
.
.
you're not planning to support ppc (even without altivec optimizations)
are you ?
regards,
x
7:54 a.m.
On Tue, 02 Mar 2004 12:29:42 +0100, Jens M Andreasen wrote
Hi!
I reorganized the Mx4 panel layout slightly to regain some screen
realestate.
Great design! :)
dave
................................. www.pawfal.org/nebogeo
8:51 a.m.
[Jens M Andreasen]
Hi!
I reorganized the Mx4 panel layout slightly to regain some screen
realestate.
Added a few more waweforms
Added intonation envelopes (pitch up/down) for each oscillator.
You get it at:
http://hem.passagen.se/ja_linux/
can you provide some example patches, please? all i seem to get out is
noise with no recognizable pitch relation to the MIDI note input ...
the user interface will be a lot easier to understand with example
patches, too. (not to say i don't like it, on the contrary!)
cheers,
tim
10:17 a.m.
Hi Tim!
The screenshot shows a very basic patch using only osc 1:
All env levels at max, all env time at min nothing else in particular
except that FREQUENCY is NON ZERO (actually 4.00 I believe.) Oh, and
there is a bit of phase modulation applied from osc 1 (self) to osc 1
...
Hint: When the timings of the sustainloop is zero, it will oscillate in
the audible spectre which is probably not what you want on your first
session.
On tis, 2004-03-02 at 13:41, Tim Goetze wrote:
[Jens M Andreasen]
Hi!
I reorganized the Mx4 panel layout slightly to regain some screen
realestate.
Added a few more waweforms
Added intonation envelopes (pitch up/down) for each oscillator.
You get it at:
http://hem.passagen.se/ja_linux/
can you provide some example patches, please? all i seem to get out is
noise with no recognizable pitch relation to the MIDI note input ...
the user interface will be a lot easier to understand with example
patches, too. (not to say i don't like it, on the contrary!)
cheers,
tim
10:56 a.m.
[Jens M Andreasen]
The screenshot shows a very basic patch using only osc
1:
All env levels at max, all env time at min nothing else in particular
except that FREQUENCY is NON ZERO (actually 4.00 I believe.) Oh, and
there is a bit of phase modulation applied from osc 1 (self) to osc 1
...
Hint: When the timings of the sustainloop is zero, it will oscillate in
the audible spectre which is probably not what you want on your first
session.
ok, now i can at least recognize the notes i play :)
can it be you're not taking any anti-aliasing precautions?
cheers,
tim
11:37 a.m.
On tis, 2004-03-02 at 15:45, Tim Goetze wrote:
ok, now i can at least recognize the notes i play :)
can it be you're not taking any anti-aliasing precautions?
Uhmm ... You do antialiasing similar to the Yamaha DX5/7/9, by pulling
down the keybias for high notes, ending up with first pure sines and
after that nothing.
Did you do (as root):
$ chown root.root ./mx4 && chmod 4711 ./mx4
Hmm ... ...
The phase modulation value from the screenshot is -23.33
It should sound like a somewhat simplistic synth-harp, no?
/jens
12:06 p.m.
[Jens M Andreasen]
On tis, 2004-03-02 at 15:45, Tim Goetze wrote:
OSS applications run via alsa-emulation on the onboard via82xx here,
and the alsa driver doesn't work with 2 periods ('blocks' in Mx4
talk).
switching to the ice1712 device or to 4 periods makes Mx4 work like a
charm. nice, clear sound indeed, sorry about any worries i may have
caused.
(hint) this wouldn't have happened with a jackified Mx4 ...
cheers, tim
ok, now i can at least recognize the notes i play :)
can it be you're not taking any anti-aliasing precautions?
Uhmm ... You do antialiasing similar to the Yamaha DX5/7/9, by pulling
down the keybias for high notes, ending up with first pure sines and
after that nothing.
Did you do (as root):
$ chown root.root ./mx4 && chmod 4711 ./mx4
Hmm ... ...
The phase modulation value from the screenshot is -23.33
It should sound like a somewhat simplistic synth-harp, no?
12:28 p.m.
On tis, 2004-03-02 at 16:55, Tim Goetze wrote:
switching to the ice1712 device or to 4 periods makes
Mx4 work like a
charm. nice, clear sound indeed, sorry about any worries i may have
caused.
(deep relief)
(hint) this wouldn't have happened with a
jackified Mx4 ...
(hint 2) so now you know what to do this coming "wochende" ;->
cheers, tim
thanx for testing // Jens M Andreasen
10:46 a.m.
On tis, 2004-03-02 at 13:41, Tim Goetze wrote:
I have put what I have now (remember I got this synth just yesterday) on
the site. It is mostly junk left over from previous versions, but patch
D3,D4 "snowq" are two playable impressions of bells/strings. D7
"clavi"
is some kind of clavinet.
Click the pretty picture at the end of page, unzip mx4patch.zip in the
directory you start mx4 from (It should have created this file already
when you started it the first time.)
/jens
can you provide some example patches, please? all i seem to get out is
noise with no recognizable pitch relation to the MIDI note input ...
the user interface will be a lot easier to understand with example
patches, too. (not to say i don't like it, on the contrary!)
cheers,
tim
11:12 a.m.
[Jens M Andreasen]
On tis, 2004-03-02 at 13:41, Tim Goetze wrote:
I have put what I have now (remember I got this synth just yesterday) on
the site. It is mostly junk left over from previous versions, but patch
D3,D4 "snowq" are two playable impressions of bells/strings. D7
"clavi"
is some kind of clavinet.
Click the pretty picture at the end of page, unzip mx4patch.zip in the
directory you start mx4 from (It should have created this file already
when you started it the first time.)
oops ..
[~/audio/src/Mx4-7] unzip ../mx4patch.zip
Archive: ../mx4patch.zip
error [../mx4patch.zip]: missing 11 bytes in zipfile
(attempting to process anyway)
error [../mx4patch.zip]: start of central directory not found;
zipfile corrupt.
(please check that you have transferred or created the zipfile in
the
appropriate BINARY mode and that you have compiled UnZip properly)
but it's a nice little boat you have there. :)
cheers,
tim
7913
days inactive
7913
days old
linux-audio-dev@lists.linuxaudio.org
12 comments
4 participants
participants (4)
-
CK -
Dave Griffiths -
Jens M Andreasen -
Tim Goetze