Hi, The kernel 2.4/2.6 kernel config files need the patch file for the new driver. Please check them in the attached files. CMI8738 contains parameter description in detail. Sincerely, ChenLi Tien -----Original Message----- From: C.L. Tien - 田承禮 Sent: 2004/4/6 [星期二] 下午 10:05 To: linux-kernel(a)vger.kernel.org; linux-audio-dev(a)music.columbia.edu Cc: 收信群組-網頁 Support 信箱 Subject: ANN: cmpci 6.77 released Hi, I made changes based on the previous released (6.67), now the version is 6.77. Major changes are described as follows: 1. I found that the legacy devices I/O ranges cannot be accessed on platforms other than X86, such as PowerPC and IA-64 systems. Now I only leave legacy devices enable selection on kernel config, user still need to set proper value for mpuio, fmio and joystick to use them, I think this matches other driver style. I also check the legacy device existance before enabling them, as there are chipset (i.e., Intel ICHx) support mpu401. 2. Fix the DUAL_DAC 4-channel PCM mode, now the 2 DACs play in synchronized way. Only user use 37 or earlier chip will feel difference. 3. Add AFMT_S16_BE format support so it can support more PowerPC platforms applications, too many APs insisted on using this format, although I report AFMT_S16_LE in GETFMT ioctl. 4. Fix AFMT_AC3 data sent on big-endian system, now MPlayer and Xine can send AC3 audio data correctly on Mac. 5. Fix CD/Line-in/AUX-in single channel mute bug. The There are 3 patch files, which should be applied to the previous version (6.67) and the change-6.67-6.77 shows version change in detail. Enjoy! Sincerely, ChenLi Tien