7 Mar
2005
7 Mar
'05
4:28 p.m.
hi list,
I have problems installing the emi26 on my box running fc3 & ccrma. I
rebuilt a kernel with the necessary module and reinstalled alsa
afterwards. it looks fine actually, even when I start alsa it loads
the module for the emi26. unfortunately it does not work yet. what did
I miss out??
my settings in modprobe.conf look like this::
alias snd-card-0 emi26
alias sound-slot-0 snd-card-0
options snd-card-0 index=0
alias snd-card-1 snd-usb-audio
options snd-card-1 index=1
alias snd-card-2 snd-intel8x0
alias sound-slot-2 snd-intel8x0
options snd-card-2 index=2
alias snd-card-3 snd-virmidi
options snd-card-3 index=3
I also did 'depmod -a' afterwards and restarted alsa. the messages
seemed to have emi26 loaded, also when I do this::
[karlos@posthuman ~]$ lsmod
Module Size Used by
snd_virmidi 8384 0
snd_seq_virmidi 12288 1 snd_virmidi
snd_seq_midi_event 12032 1 snd_seq_virmidi
snd_seq 59536 2 snd_seq_virmidi,snd_seq_midi_event
snd_intel8x0 36800 1
snd_ac97_codec 76792 1 snd_intel8x0
snd_usb_audio 70336 0
snd_pcm_oss 57632 0
snd_mixer_oss 23552 2 snd_pcm_oss
snd_pcm 99204 4
snd_intel8x0,snd_ac97_codec,snd_usb_audio,snd_pcm_oss
snd_timer 30340 2 snd_seq,snd_pcm
snd_usb_lib 17408 1 snd_usb_audio
snd_rawmidi 29472 2 snd_seq_virmidi,snd_usb_lib
snd_seq_device 13196 2 snd_seq,snd_rawmidi
snd 62052 13
snd_virmidi,snd_seq_virmidi,snd_seq,snd_intel8x0,snd_ac97_codec,snd_usb_audio,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer,snd_usb_lib,snd_rawmidi,snd_seq_device
soundcore 14304 2 snd
emi26 168704 0
but it is not claimed by any device. I have it connected and the blue
LED it lit, so I wonder what the heck I do wrong. should I see more
lights, green ones? I have not used the emi26 with something else so I
don't know.
any ideas?
thanks,
Karsten
7 Mar
7 Mar
7:05 p.m.
New subject: emi26 [was: Re: [linux-audio-dev] Re: Welcome to the "linux-audio-dev" mailing list9
Hallo,
krsrtn hat gesagt: // krsrtn wrote:
I have problems installing the emi26 on my box running
fc3 & ccrma. I
rebuilt a kernel with the necessary module and reinstalled alsa
afterwards. it looks fine actually, even when I start alsa it loads
the module for the emi26. unfortunately it does not work yet. what did
I miss out??
my settings in modprobe.conf look like this::
alias snd-card-0 emi26
Make that: "alias snd-card-0 snd-usb-audio".
emi26 is not an alsa driver module. All alsa modules start with "snd"
The "emi26" module is just a firmware loader, IIRC.
Ciao
--
Frank Barknecht _ ______footils.org__
_ __latest track: fqdn _ http://footils.org/cms/show/38
7:25 p.m.
New subject: emi26 [was: Re: [linux-audio-dev] Re: Welcome to the "linux-audio-dev" mailing list9
hm..
ok, but still the frimware is not claimed by the device:
[karlos@posthuman ~]$ lsmod | grep emi26
emi26 168704 0
I don't understand what else there is to do to make it appear (in jack
for example).
cheers,
karsten
On Tue, 8 Mar 2005 00:05:29 +0100, Frank Barknecht <fbar(a)footils.org> wrote:
Hallo,
krsrtn hat gesagt: // krsrtn wrote:
I have problems installing the emi26 on my box
running fc3 & ccrma. I
rebuilt a kernel with the necessary module and reinstalled alsa
afterwards. it looks fine actually, even when I start alsa it loads
the module for the emi26. unfortunately it does not work yet. what did
I miss out??
my settings in modprobe.conf look like this::
alias snd-card-0 emi26
Make that: "alias snd-card-0 snd-usb-audio".
emi26 is not an alsa driver module. All alsa modules start with "snd"
The "emi26" module is just a firmware loader, IIRC.
Ciao
--
Frank Barknecht _ ______footils.org__
_ __latest track: fqdn _ http://footils.org/cms/show/38
8 Mar
8 Mar
4:33 a.m.
New subject: emi26 [was: Re: [linux-audio-dev] Re: Welcome to the "linux-audio-dev" mailing list9
(please don't top-post)
krsrtn wrote:
ok, but still the frimware is not claimed by the
device:
[karlos@posthuman ~]$ lsmod | grep emi26
emi26 168704 0
This driver just loads the firmware. After that, the device is a
standard USB audio device, and the snd-usb-audio driver takes over.
I don't understand what else there is to do to
make it appear (in jack
for example).
Is snd-usb-audio loaded? Is audio not loaded?
Does it appear in /proc/asound/cards?
Regards,
Clemens
6:57 a.m.
hi,
I have the snd-usb-audio loaded, I think, as I can use the UC33 usb
midi controller. The only thing I wonder about is whether it might
have something to do with the fact that I have to modprobe the emi26
module manually. here is more info, I hope that helps::
[karlos@posthuman ~]$ lsmod
Module Size Used by
emi26 168704 0
realtime 9608 0
commoncap 12544 1 realtime
parport_pc 32324 1
lp 16524 0
parport 40648 2 parport_pc,lp
autofs4 23812 0
smbfs 70392 2
sunrpc 150884 1
pcmcia 26628 2
video 19844 0
button 10896 0
battery 13572 0
ac 9092 0
nvidia 3473692 14
md5 8576 1
ipv6 270976 10
prism54 61192 0
ohci1394 38404 0
ieee1394 311860 1 ohci1394
usb_midi 28164 0
yenta_socket 24960 1
joydev 14016 0
pcmcia_core 63408 2 pcmcia,yenta_socket
uhci_hcd 37520 0
ehci_hcd 37764 0
i2c_i801 12684 0
i2c_core 26752 1 i2c_i801
snd_intel8x0m 22596 0
snd_virmidi 8384 0
snd_seq_virmidi 12288 1 snd_virmidi
snd_seq_midi_event 12032 1 snd_seq_virmidi
snd_seq 59536 2 snd_seq_virmidi,snd_seq_midi_event
snd_intel8x0 36800 0
snd_ac97_codec 76792 2 snd_intel8x0m,snd_intel8x0
snd_usb_audio 70336 0
snd_pcm_oss 57632 0
snd_mixer_oss 23552 1 snd_pcm_oss
snd_pcm 99204 5
snd_intel8x0m,snd_intel8x0,snd_ac97_codec,snd_usb_audio,snd_pcm_oss
snd_timer 30340 2 snd_seq,snd_pcm
snd_page_alloc 14340 3 snd_intel8x0m,snd_intel8x0,snd_pcm
snd_usb_lib 17408 1 snd_usb_audio
snd_rawmidi 29472 2 snd_seq_virmidi,snd_usb_lib
snd_seq_device 13196 2 snd_seq,snd_rawmidi
snd 62052 14
snd_intel8x0m,snd_virmidi,snd_seq_virmidi,snd_seq,snd_intel8x0,snd_ac97_codec,snd_usb_audio,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer,snd_usb_lib,snd_rawmidi,snd_seq_device
soundcore 14304 2 usb_midi,snd
ndiswrapper 131352 0
8139too 30592 0
mii 9472 1 8139too
floppy 63472 0
dm_snapshot 22176 0
dm_zero 6400 0
dm_mirror 27352 2
ext3 133640 2
jbd 66072 1 ext3
dm_mod 64128 6 dm_snapshot,dm_zero,dm_mirror
and then /proc/asound/cards::
0 [ICH5 ]: ICH4 - Intel ICH5
Intel ICH5 with ALC202 at 0xc0000c00, irq 177
1 [VirMIDI ]: VirMIDI - VirMIDI
Virtual MIDI Card 1
2 [Modem ]: ICH-MODEM - Intel ICH5 Modem
Intel ICH5 Modem at 0x2400, irq 177
3 [Controller ]: USB-Audio - UC-33 USB MIDI Controller
Evolution Electronics Ltd. UC-33 USB MIDI
Controller at usb-0000:00:1d.1-1, ful
/proc/asound/cards (END)
so it doesn't even appear there so I thought to look at dmesg::
usbcore: registered new driver emi26 - firmware loader
usb 4-1: USB disconnect, address 2
hub 3-0:1.0: port 1 disabled by hub (EMI?), re-enabling...
hub 3-0:1.0: over-current change on port 1
usb 3-1: USB disconnect, address 2
usb 3-1: new full speed USB device using uhci_hcd and address 3
usb 4-1: new full speed USB device using uhci_hcd and address 3
midi: probe of 4-1:1.0 failed with error -5
these are the last messages at the bottom, after I re-connected the
device. does it mean it recognised the device and it works or not?
my modprobe.conf looks like this::
alias snd-card-0 snd-usb-audio
alias sound-slot-0 snd-card-0
options snd-card-0 index=0
alias snd-card-1 snd-usb-audio
options snd-card-1 index=1
alias snd-card-2 snd-intel8x0
alias sound-slot-2 snd-intel8x0
options snd-card-2 index=2
alias snd-card-3 snd-virmidi
options snd-card-3 index=3
install snd-intel8x0 /sbin/modprobe --ignore-install snd-intel8x0 &&
/usr/sbin/alsactl restore >/dev/null 2>&1 || :
remove snd-intel8x0 { /usr/sbin/alsactl store >/dev/null 2>&1 || : ;
}; /sbin/modprobe -r --ignore-remove snd-intel8x0
can you see any error or problem? I don't know what is wrong really,
as the firmware is there, the snd-usb-audio and even the device is lit
up, so I wonder what's wrong.
what is 'top-post' by the way?
regards,
karsten
7:50 a.m.
New subject: [linux-audio-dev] EMI26 (was: Welcome to the "linux-audio-dev" mailing list)
krsrtn wrote:
0 [ICH5 ]: ICH4 - Intel ICH5
Intel ICH5 with ALC202 at 0xc0000c00, irq 177
1 [VirMIDI ]: VirMIDI - VirMIDI
Virtual MIDI Card 1
2 [Modem ]: ICH-MODEM - Intel ICH5 Modem
Intel ICH5 Modem at 0x2400, irq 177
3 [Controller ]: USB-Audio - UC-33 USB MIDI Controller
Evolution Electronics Ltd. UC-33 USB MIDI Controller at
usb-0000:00:1d.1-1, ful
so it doesn't even appear there so I thought to look at dmesg::
usbcore: registered new driver emi26 - firmware loader
usb 4-1: USB disconnect, address 2
hub 3-0:1.0: port 1 disabled by hub (EMI?), re-enabling...
hub 3-0:1.0: over-current change on port 1
usb 3-1: USB disconnect, address 2
usb 3-1: new full speed USB device using uhci_hcd and address 3
usb 4-1: new full speed USB device using uhci_hcd and address 3
midi: probe of 4-1:1.0 failed with error -5
these are the last messages at the bottom, after I re-connected the
device. does it mean it recognised the device and it works or not?
It seems the firmware got loaded.
Does it appear in the output of lsusb? What are the contents of
/proc/bus/usb/devices after the emi26 module has been loaded?
my modprobe.conf looks like this::
alias snd-card-0 snd-usb-audio
options snd-card-0 index=0
You cannot have options on an alias. Your options lines should look
like this:
options snd-usb-audio index=0,1
options snd-intel8x0 index=2
options snd-virmidi index=3
options snd-intel8x0m index=4
what is 'top-post' by the way?
A: No.
Q: Should I include quotations after my reply?
Regards,
Clemens
6:59 p.m.
New subject: [linux-audio-dev] EMI26 (was: Welcome to the "linux-audio-dev" mailing list)
hi,
ok. this is the output of lsusb after I modprobed emi26:
Bus 005 Device 001: ID 0000:0000
Bus 004 Device 002: ID 086a:0102 Emagic Soft-und Hardware GmbH
Bus 004 Device 001: ID 0000:0000
Bus 003 Device 001: ID 0000:0000
Bus 002 Device 001: ID 0000:0000
Bus 001 Device 001: ID 0000:0000
after that I looked at what you said, /proc/bus/usb/devices::
T: Bus=05 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 2.06
S: Manufacturer=Linux 2.6.10-prep uhci_hcd
S: Product=UHCI Host Controller
S: SerialNumber=0000:00:1d.3
C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms
T: Bus=04 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 2.06
S: Manufacturer=Linux 2.6.10-prep uhci_hcd
S: Product=UHCI Host Controller
S: SerialNumber=0000:00:1d.2
C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms
T: Bus=04 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=12 MxCh= 0
D: Ver= 1.00 Cls=ff(vend.) Sub=ff Prot=ff MxPS=64 #Cfgs= 1
P: Vendor=086a ProdID=0102 Rev= 0.01
C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=100mA
I: If#= 0 Alt= 0 #EPs= 0 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
I: If#= 0 Alt= 1 #EPs=13 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=10ms
E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=84(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=04(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=86(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=06(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=88(I) Atr=01(Isoc) MxPS= 16 Ivl=1ms
E: Ad=08(O) Atr=01(Isoc) MxPS= 16 Ivl=1ms
E: Ad=89(I) Atr=01(Isoc) MxPS= 16 Ivl=1ms
E: Ad=09(O) Atr=01(Isoc) MxPS= 16 Ivl=1ms
E: Ad=8a(I) Atr=01(Isoc) MxPS= 16 Ivl=1ms
E: Ad=0a(O) Atr=01(Isoc) MxPS= 16 Ivl=1ms
I: If#= 0 Alt= 2 #EPs=13 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
E: Ad=81(I) Atr=03(Int.) MxPS= 64 Ivl=10ms
E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=84(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=04(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=86(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=06(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=88(I) Atr=01(Isoc) MxPS= 256 Ivl=1ms
E: Ad=08(O) Atr=01(Isoc) MxPS= 256 Ivl=1ms
E: Ad=89(I) Atr=01(Isoc) MxPS= 16 Ivl=1ms
E: Ad=09(O) Atr=01(Isoc) MxPS= 16 Ivl=1ms
E: Ad=8a(I) Atr=01(Isoc) MxPS= 16 Ivl=1ms
E: Ad=0a(O) Atr=01(Isoc) MxPS= 16 Ivl=1ms
T: Bus=03 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 2.06
S: Manufacturer=Linux 2.6.10-prep uhci_hcd
S: Product=UHCI Host Controller
S: SerialNumber=0000:00:1d.1
C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms
T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=480 MxCh= 8
B: Alloc= 0/800 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=01 MxPS= 8 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 2.06
S: Manufacturer=Linux 2.6.10-prep ehci_hcd
S: Product=EHCI Host Controller
S: SerialNumber=0000:00:1d.7
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=256ms
but I can't make much of it. apparently the device number from lsusb
(2) is the one that is longer than the others, but I don't understand
the output. can you see what happened?
thanks,
karsten
9 Mar
9 Mar
9:58 a.m.
New subject: [linux-audio-dev] EMI26 (was: Welcome to the "linux-audio-dev" mailing list)
krsrtn wrote:
after that I looked at what you said,
/proc/bus/usb/devices::
...
D: Ver= 1.00 Cls=ff(vend.) Sub=ff Prot=ff MxPS=64 #Cfgs= 1
P: Vendor=086a ProdID=0102 Rev= 0.01
C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=100mA
I: If#= 0 Alt= 0 #EPs= 0 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
...
The firmware wasn't loaded.
ok. this is the output of lsusb after I modprobed
emi26:
Bus 004 Device 002: ID 086a:0102 Emagic Soft-und Hardware GmbH
The emi26 module expects the device to have product ID 0100. It seems
you have a new hardware revision.
I'll see if I can update the emi26 driver.
Regards,
Clemens
7291
days inactive
7293
days old
linux-audio-dev@lists.linuxaudio.org
7 comments
3 participants
participants (3)
-
Clemens Ladisch -
Frank Barknecht -
krsrtn